空心玻璃微珠复合聚酰亚胺泡沫的泡孔结构与性能

通过填充空心玻璃微珠,采用预聚法制备了空心玻璃微珠复合聚酰亚胺泡沫,研究了空心玻璃微珠填充量对复合聚酰亚胺泡沫的泡孔结构、热性能和压缩性能的影响规律。结果表明,随着空心玻璃微珠填充量的增加,聚酰亚胺泡沫泡孔结构变得精细,并且热稳定性、玻璃化转变温度和压缩性能都随之提高。当填充量(空心玻璃微珠与均苯四甲酸酐的质量比)达到20%时,泡沫5%热失重温度提高了13.9℃,玻璃化转变温度提高了8.1℃,压缩强度提高了约21%,压缩模量提高了约12%。     

苯乙炔基封端聚酰亚胺材料研究进展

在过去二十年中，芳香族聚酰亚胺材料得到越来越广泛的应用，其中苯乙炔基封端的聚酰亚胺材料因其优异的性能成为目前耐高温聚合物材料研究的热点。本文综述了苯乙炔基封端聚酰亚胺材料的研究现状与发展趋势，着重对材料的化学结构设计与制备方法、以及化学结构与性能之间的关系进行介绍。     

乙炔基封端聚酰亚胺增韧改性的相结构

以双酚A二醚二酐(BPADA)和3乙-炔苯胺(APA)为原料,通过两步法合成一种热固性可交联的聚酰亚胺预聚体.将此预聚体分别与不同结构的热塑性聚酰亚胺(PI)共混,对其进行增韧改性,通过调控热塑性聚酰亚胺的质量分数,引入结构相似且含有更多柔性基团的热塑性聚酰亚胺(如含有醚键和对称甲基结构的二酐),得到了热固/热塑性聚酰亚胺复合膜.利用差示扫描量热仪(DSC)及扫描电镜(SEM)对该体系的相分离结构和相容性进行研究,并讨论其机械性能和热性能.结果表明,相分离结构使体系的机械性能得到改善,同时也保持了原有的优异热性能.     

聚酰亚胺泡沫材料的制备与性能表征

采用3,3′,4,4′-二苯甲酮四甲酸二酐(酮酐,BTDA)和4,4′-二氨基二苯甲烷(MDA)为主要原料制备了一种聚酰亚胺泡沫材料.采用傅里叶变换红外光谱(FTIR)、核磁共振氢谱(1H-NMR)、扫描电镜(SEM)、导热系数测定仪、热失重分析(TGA)、差式扫描量热分析(DSC)及驻波管分别对前聚体粉末化学结构、泡沫泡孔结构、热性能及声学性能进行了表征.研究结果表明前聚体粉末以聚酰胺酯和铵盐两种形式存在,所得泡沫泡孔均匀,并且随前聚体干燥温度升高,泡孔尺寸变小.泡沫的导热系数λ为7.62×10-3W/(m.K),失重5wt%的分解温度Td5为540℃,玻璃化转变温度Tg为306℃,表明其具有优良的隔热耐热性.并且由声学测试可知在0～2000Hz频率范围内,吸声系数可达0.79,传声损失可达19.4dB,具有低频吸声、隔声性.     

CO_2捕集炭膜的前驱体结构设计及性能

从分子结构设计出发,合成了一系列新型刚性、高自由体积的聚酰亚胺炭膜前驱体,并制备了炭膜.采用热重分析(TGA)、傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)和高分辨透射电子显微镜(HRTEM)研究了不同聚酰亚胺前驱体的热分解特性及在热解炭化过程中化学结构、微结构的变化规律;测试了所制备炭膜的气体分离性能.结果表明,前驱体的自由体积分数显著影响炭膜的气体分离性能;聚合物结构越具刚性,自由体积越大,所得炭膜结构越疏松,极微孔道尺寸越大,越有利于气体分子在炭膜极微孔道中的渗透、扩散与传输.其中,刚性大体积基团芴基、酚酞cardo基团和六氟异丙基的引入能有效破坏分子链间的堆积,提高聚合物的自由体积,所形成炭膜的结构较疏松,均表现出优异的气体渗透性和分离选择性,超越了Robeson上限,解决了传统炭膜气体渗透性能低的问题.特别是采用羟基官能化聚酰亚胺前驱体制备的炭膜在保持较高气体分离选择性的同时,CO_2气体的渗透性高达24770 Barrer(1 Barrer≈7.5×10-18m2·s-1·Pa-1),可实现对CO_2的有效分离和捕集,展现出良好的商业化应用前景.     

蒙脱石原位合成有序介孔材料

介孔材料由于其特殊的孔结构和性能而引起众多学者的极大兴趣 . 1 0年来 ,对其合成技术、形成机理、功能材料制备和催化应用等进行了有意义的探索 [1～ 5] .目前 ,对介孔材料热稳定性探讨也在不断深入 [6 ,7] .已有的研究所用的硅源大多是化学试剂 ,以天然矿物为原料 ,利用其硅源和特殊结构 ,通过结构活化转变制备介孔材料的研究还少见报道 .Yanagisawa[8]和 Inagaki等 [9]在相同条件下采用方钠石作前驱体合成了与 MCM-41结构相似的 FSM-1 6.本项研究采用蒙脱石天然矿物作为前驱体 ,通过适当活化 ,在模板剂用量较少的情况下 ,得到了热稳…     

硬质闭孔聚酰亚胺结构泡沫的结构调控与性能

通过调控聚酰亚胺(PI)树脂主链结构中二苯羰基链段与不对称联苯链段的含量比例,制备了具有不同羰基含量的PI前驱体固体树脂。这些前驱体树脂都具有良好的熔融性,当加热至320~330℃时,PI树脂完全熔融形成低粘度熔体树脂;进一步提高加热温度时树脂熔体粘度由于发生交联反应而急剧增大。将前驱体树脂经加热发泡形成的热固性硬质闭孔PI泡沫具有很高的闭孔率(86%)和耐热性能(Tg353℃,T10519℃)。研究发现,在PI树脂主链结构中引入二苯甲酮链段可明显提高PI泡沫的韧性,而不会牺牲其力学强度和模量。     

可溶性聚酰亚胺共聚物的制备及其性能

通过共缩聚及改变单体加料顺序和方法,得到了两系列共聚型聚酰亚胺,并应用Fr-IR、UV、X射线衍射、TGA、机械性能测试等方法,对所得聚酰亚胺树脂的性能进行了表征。结果表明,所得共聚型聚酰亚胺树脂成膜性能良好,能够得到坚韧且具有弹性的薄膜材料,其在400～450nm区域的透过性能良好,在有机溶剂中的溶解性能显著增强,并保持了聚酰亚胺特有的良好机械性能及耐热性能。     

具有高表面反射性和导电性的聚酰亚胺-银复合薄膜的制备

聚酰亚胺-银的复合薄膜以其表面银层无与伦比的反射性和电导率,再加上聚酰亚胺基体本身优异的热稳定性和物理机械性能,以及其轻质和柔性的特点,在航空航天和微电子等许多领域具有广阔的应用前景,成为近年来广泛研究的多功能材料之一。本文对比了当前用于制备表面金属化的聚酰亚胺薄膜的各种方法及其优缺点,包括外部沉降法、超临界流体法、原位一步自金属化法、表面改性离子交换自金属化法和直接离子交换自金属化法,特别总结了由本课题组近年来所发展起来的表面改性离子交换自金属化法和直接离子交换自金属化法在制备高反射高导电的双面银化的聚酰亚胺薄膜方面所取得的研究进展。这两种方法均基于简单的银盐化合物前驱体即可实现双面高反射高导电的表面银化的聚酰亚胺薄膜的制备,过程简单,成本低廉。所制得的聚酰亚胺-银复合薄膜的表面反射率超过100%,表面电阻接近纯金属银的水平;复合薄膜的表面银层与聚合物基体之间有很优异的粘结性能;且很好地保持了母体聚酰亚胺薄膜优异的机械性能和热性能。其中采用直接离子交换自金属化技术,仅需将聚酰亚胺的预聚体薄膜在极稀的银盐水溶液中(0.01M银氨溶液)处理5min,然后热处理即可实现聚酰亚胺薄膜的双面金属化,是目前效率最高和银利用率最高的方法。     

二维碳纳米薄膜制备的新途径——由自组装膜到石墨烯

本文描述了芳香族分子作为自组装单分子膜(SAMs)前驱体在电子辐照下引发芳香基团交联,在真空或惰性气氛中转化为具有较高热稳定性的碳纳米薄膜(CNMs)。CNMs具有足够的机械强度,可从其基底表面转移作为独立的薄膜材料,经高温淬火后转化为石墨烯。根据制备条件,如芳香分子前驱体的化学结构、电子辐照和淬火参数等,可以调整所制得的石墨烯的形状、结晶度、厚度、孔径等各种性能。各种芳香族硫醇,如低环及多环芳烃碳氢化合物,获得的CNMs的结构和功能由其单分子膜的结构所决定。本文详细讨论了电子辐射诱导SAMs芳香分子交联反应的机理。CNMs/石墨烯异质结构的非破坏性化学功能化组装为CNMs/石墨烯在电子、光子器件以及生物膜中的应用开辟了一条灵活的途径。     

Ab initio studies of the conformations of ethynyl formate, cyano formate and related ethynyl and cyano compounds

The optimized geometries, relative free energies and related thermodynamic properties, harmonic frequencies, and dipole moments have been calculated at the HF and MP2 levels for ethynyl formate (1a), ethynyl acetate (1b), cyano formate, HCO₂CN (1c), cyano acetate (1d), S-ethynyl thioformate (2a), S-ethynyl thioacetate (2b), S-cyano thioformate (2c), S-cyano thioacetate (2d), N-ethynylformamide (3a), N-ethynylacetamide (3b), N-cyanoformamide (3c), and N-cyanoacetamide (3d) with the gaussian 98 program. For ethynyl formate, the calculation for 25 °C at the MP2/6-311++G(df,pd) level predicts that the Z isomer is more stable by 1.23 kcal/mol. For S-ethynyl thioformate, calculations at the MP2/6-311++G(2d,2p) level predict that the E isomer is favored by 0.71 kcal/mol at 25 °C. The E isomers of N-ethynylformamide and N-ethynylacetamide were found at all levels to be more stable than the Z isomers at 25 °C. For cyano formate and cyano acetate, calculations at the MP2/6-311++G(df,pd) level predict that the Z isomers are more stable at 25 °C by 1.50 and 2.72 kcal/mol, respectively. At this level and temperature, the Z isomers of 2c, 2d, 3c, and 3d are predicted to have free energies of 0.46, −0.07, 1.22, and 2.28 kcal/mol, respectively, relative to the E conformations. Z to E free-energy barriers at 25 °C of 8.63, 10.64, 17.63, 7.39, and 14.03 kcal/mol were calculated for 1a, 2a, 3a, 1c, and 3c at the HF/6-311G(d,p) level, and at the HF/6-311+G(d,p) level, the free-energy barrier for 2c was 7.08 kcal/mol.     

Pyrazolones as Building Blocks in Heterocyclic Synthesis: Synthesis of New Pyrazolopyran,Pyrazolopyridazine and Pyrazole Derivatives of Expected Antifungicidal Activity

A series of new pyrazolone and pyrazole derivatives with expected antifungicidal activity have been prepared through the reactions 3‐phenyl‐1‐H‐pyrazol‐5(4H)‐one ( 3 ) and 4‐(dimethylaminomethylene)‐3‐phenyl‐1H‐pyrazol‐5(4H)‐one ( 5 ) with a variety of electrophilic reagents and nucleophilic reagents. The newly synthesized compounds were characterized by IR, ¹H NMR, ¹³C NMR and mass spectral studies.     

Characteristics of Lipids from Individual Organs of Veronica beccabunga

Lipids from various organs of the aquatic plant Veronica beccabunga were studied. It has been demonstrated that neutral and polar lipids are qualitatively typical of higher photosynthetic plants. Lipids in various organs of aquatic veronica were unevenly distributed. The most significant differences were observed in neutral lipids for the accumulation of glycerin esters, free fatty acids, alcohols, and hydrocarbons. The ratio of phospholipids varied considerably in the polar lipids.     

Potentiometric and thermodynamic studies of 2-mercapto-5-(2-hydroxynaphthylideamino)-1,3,4-thiadiazole and its metal complexes

Summary Proton-ligand dissociation constant of 2-mercapto-5-(2-hydroxynaphthylideamino)-1,3,4-thiadiazole (MHT) and the stepwise stability constants of its metal complexes were determined potentiometrically in 40 mass/mass% ethanol-water mixture containing 0.1 M KCl. The stabilities of the complexes follow the order: Cu²⁺>Ni²⁺>Co²⁺>Mn²⁺. The dissociation constant (pK^H) of MHT and the stability constants (logK) of its metal complexes were determined at different temperatures and the corresponding thermodynamic parameters were calculated and discussed. The proton dissociation process is non-spontaneous, endothermic and entropically unfavoured. The formation of the metal complexes was found to be spontaneous, endothermic and entropically favoured.     

溶质迁移研究进展

溶质迁移研究已成为水文地质等领域的一个重要研究课题。综述了溶质迁移研究进展,重点介绍了溶质迁移在地下水污染与防治、土壤盐碱化防治、海水入侵和咸水入侵防治等方面的研究现状,并指出应进一步研究的问题。     

Synthesis and spectral properties of malononitrile-based merocyanine dyes

Di-, tetra-, and hexamethine merocyanines derived from malononitrile and heterocycles with moderate (dyes 1–6), strong (7–9), and weak (10 and 11) electron-releasing ability were synthesized. The electronic structures of merocyanines 10 and 11 are similar to the neutral polyene state, whereas those of 7–9 are similar to the ideal polymethine state. These tendencies become more pronounced with increasing length of the polymethine chain. The merocyanines derived from heterocyclic residues with weak or moderate electron-releasing ability exhibit a positive solvatochromism, whereas those with strong electron-releasing ability show a negative solvatochromism. An increase in the polarity of the solvent makes the former compounds more similar to polymethines, whereas the latter become more similar to polyenes bearing opposite charges on the end groups. The nature of the factors (nonspecific solvation, specific nucleophilic and electrophilic solvation, and vibronic interactions) responsible for the observed characteristic features was analyzed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2726–2735, December, 2005.     

Studies of some monocyclic and bicyclic arylacetonitriles

The high-resolution (1)H, (13)C, (1)H-(1)H COSY and (1)H-(13)C COSY NMR spectra have been recorded in CDCl(3) for arylacetonitriles 1-12 and analyzed. The arylacetonitriles 3-7 exist in two isomeric forms E (methyl group is anti to cyano group) and Z (the methyl group is syn to cyano group) in solution. Normal chair conformation with equatorial orientations of phenyl rings at C-2 and C-6 for monocyclic nitriles 1 and 2, epimeric chair structure EC (axial configuration of methyl group at C-3) for both the E and Z isomers of arylacetonitrile derivatives (3-7) and a distorted boat form, B(3), for the N-acylacetonitrile derivatives (8-10) have been proposed based on NMR data. The bicyclic nitriles 11 and 12 exist in twin chair conformations in solution. DFT calculations and chemical shifts also support these conformations. Geometry optimizations for 1-12 were carried out according to density functional theory using B3LYP/6-31G(d,p) basis set and for 1 and 8 the theoretical geometrical parameters have been compared with those of single crystal measurements.     

Elucidation of activity of copper and copper oxide nanomaterials for electrocatalytic and photoelectrochemical reduction of carbon dioxide

Copper- and copper oxide–based materials are, in principle, promising components (supports, reactive sites, and visible light–absorbing semiconductors) of electrocatalysts and photocathodes for reduction of carbon dioxide. Electrochemical and photoelectrochemical approaches are generally suitable for the low-temperature CO₂-conversion to carbon-based simple organic fuels or utility chemicals.Different concepts of utilization, including nanostructuring, doping, admixing, preconditioning, modification, or functionalization of various copper- and copper oxide–based systems for catalytic electroreduction and photoelectrochemical reduction of CO₂ are elucidated, as well as important strategies to enhance the systems' overall activity and stability are discussed.     

Fabrication of SiO2-TiO2/PVDF Copolymer Nanofiber Composite by Electrospinning Process

Multifunctional nanocomposite material is a key material component for the future. It is indicated by many studies have been conducted by researchers in university, research institute and industries. Silicon dioxide (SiO₂), titanium dioxide (TiO₂) and polyvinilidene fluoride copolymer are very important material due to their excellent properties. In this research paper, we have successfully synthesized SiO₂-TiO₂/PVDF copolymer nanofiber composite by electrospinning process. SiO₂-TiO₂/PVDF copolymer nanofiber composite has smooth surface morphology without bead on nanofiber string after confirming by scanning electron microscopy (SEM). Nanofiber composite has average diameter of 350 nm. FTIR and XRD structure analysis of nanofiber composite show us that PVDF copolymer in nanocomposite has a mixed α and β phase crystal structure. Crystal phase of TiO₂ in nanofiber composite was in rutile form.     

Determination of low level nitrite and nitrate in biological, food and environmental samples by gas chromatography-mass spectrometry and liquid chromatography with fluorescence detection

Gas chromatography-mass spectrometry (GC-MS) and liquid chromatography with fluorescence detection (LC-FL) methods have been proposed for the determination of low level nitrite and nitrate in biological, food and environmental samples. The methods include derivatization of aqueous nitrite with 2,3-diaminonaphthalene (DAN), enzymatic reduction of nitrate to nitrite, extraction with toluene and chromatographic analyses of highly fluorescent 2,3-naphthotriazole (NAT) derivative of nitrite by using GC-MS in selected-ion-monitoring (SIM) mode and LC-FL. Nitrite and nitrate ions in solid samples were extracted with 0.5 M aqueous NaOH by sonication. The recoveries of nitrite and nitrate ions based on GC-MS and LC-FL results were 98.40% and 98.10% and the precision of these methods, as indicated by the relative standard deviations (RSDs) were 1.00% for nitrite and 1.20% for nitrate, respectively. The limits of detection of the GC-MS in SIM mode and LC-FL methods based on S/N = 3 were 0.02 and 0.29 pg/ml for nitrite and 0.03 and 0.30 pg/ml for nitrate, respectively.