New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.     

Conformationally Selective Synthesis of Mononitrocalix[4]arene in Cone or Partial Cone

Nitro‐substituted calixarenes in a cone and a partial cone conformation were prepared selectively using distinct synthetic routes. The selective nitration of tris‐ or penta‐substituted phenols of calix[4]arene or calix[6]arene provided mononitrocalix[n ]arenes (n  =  4, 6). Subsequent addition of ethylene glycol (EG) moieties to mononitrocalix[4]arene provided tetraEGylcalix[4]arene in locked partial cone conformation. By an alternative route – initial addition of EG moieties to the non‐derivatized calix[4]arene followed by the uncontrolled nitration – provided mononitro‐ and dinitro‐tetraEGylcalix[4]arenes locked in the cone conformation. These nitrocalix[4]arenes with locked cone or partial cone conformation are useful building blocks for further assembly of supramolecular systems, especially in the area of material sciences.     

The Preorganization Effect of the Calix[4]arene Platform on the Extraction Properties of Acetylhydrazide Groups with Transition Metal Ions

The binding properties of the cone conformer of O,O,O,O-tetrakis[hydrazinocarbonylmethyl]-4-tert-butylcalix[4]arene, the cone and the 1,3-alternate conformers of the corresponding thia analogue have been evaluated by means of liquid–liquid extraction for a large variety of metal ions. The extraction constants and the stoichiometries of the complexes formed have been determined. Comparison of the extraction properties of calix[4]arenes with their acyclic monomeric analogue clearly demonstrated, that the preorganization of acetylhydrazide groups on the calix[4]arene platform is the cause for a significant improvement of its binding properties. The presence of additional “soft” nitrogen binding sites in acetylhydrazide derivatives of calix[4]arenes compared to their amide derivatives leads to a shift from their classical selectivity for alkali and alkaline earth cations to transition metals. The cone conformer of tetrathiacalix[4]arene shows higher selectivity in a series of d-metal ions compared with its “classical” analogue. The 1,3-alternate conformer exhibits an excellent extraction selectivity for Cu²⁺ and Hg²⁺.     

Thermodynamics,a suitable reporter in the design of mercury (II) ion selective electrodes

A fully functionalised calix[4]pyrrole derivative, namely, meso-tetramethyl-tetrakis[(diethylthiocarbamoyl)phenoxy] calix[4]-pyrrole, 1 has been synthesised and structurally characterised. Its complexing properties with metal cations in acetonitrile were investigated with particular emphasis on the thermodynamics of these systems. These data and those previously reported for a partially functionalised calix[4]arene based receptor, 5,11,17,23-tetra-tert-butyl[25,27 bis(diethylthiocarbamoyl)oxy]calix[4]arene, 2 were used to, i) further corroborate their use to predict the selectivity coefficients of carrier mediated mercury (II) ion selective electrodes (ISEs) and ii) to obtain approximate stability constant data from selectivity coefficients. The optimum working conditions of both electrodes were determined. It is shown that while the ISE based on 1 is characterised by a wider linear range and a lower mercury (II) detection than the one based on 2, the latter has the advantage of lower interference of other metal cations due to the much lower stability constants of bivalent cations relative to Hg(II). The response characteristics of these electrodes are compared with those found in the literature. SEM micrographs along with EDX spectra of the PVC membranes containing ionophore 1 or 2 unloaded and loaded with Hg(II) are reported.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

Molecular design of calixarene-based ion-selective electrodes

In order to obtain insights into relationships between the calix[4]arene structure and the ion selectivity in the electrode system, 20 ionophoric calix[4]arenes were synthesized and their ion selectivity (with Na⁺ as a standard) estimated. Among these ionophoric calix[4]arenes, 25,26,27,28-tetrakis[(ethoxycarbonyl)methoxy]-p-t-octylcalix[4]arene afforded the highest logK _NA,M ^pot value (–3.1) in the presence of 2-fluorophenyl-2-nitrophenylether (10) as the best of 13 plasticizers. This is the first example in which the Na⁺/K⁺ selectivity exceeds a factor of 10³ in the electrode system based on the neutral carrier. The high Na⁺ selectivity is attributed to modification of the upper rim which ostensibly has no relation with the component of the cavity. This paper demonstrates the potential relationships between the unique structure of the calix[4]arene-based ligands and selectivity performance for the design of ion-selective electrodes.     

Synthesis of chiral calix[4]arenes bearing tartaric ester moieties

The synthesis of chiral calix[4]arenes with tartaric acid ester moieties has been achieved by the reactions of tartaric ester chloroacetates with calix[4]arenes in moderate yields. All the chiral calix[4]arene derivatives are in a cone conformation according to the ¹H NMR doublet–doublet pattern of the protons of the methylene groups between the phenol rings. The results of NMR and specific rotations indicate that the molecules have C₂ symmetry with asymmetric features.     

Stereochemical control of calixarenes useful as rigid and conformationally diversiform platforms for molecular design

Stereochemical problems and related functions of calix[4]arenes, calix[6]arenes and their chiral derivatives have been reviewed. In p-tert-butylcalix[4]arene (1H₄) and its mono-, di-, tri-, and tetra-O-alkyl derivatives (1H₃R, 1H₂R₂,1HR₃, and 1R₄, respectively), 23 different homologues can exist (including 1H₄). We found that the OH group in the unmodified phenol unit is permeable through the calix[4]arene ring. Thus, several conformational isomers become equivalent after the ‘oxygen-through-the-annulus’ rotation of the OH group and the number of possible homologues is reduced to 13 (including 1H₃). We report in this paper the syntheses of all of these possible conformational isomers using a protection-deprotection method with a benzyl group and metal template effects. On the other hand, all possible chiral isomers that can be derived from calix[4]arene by modification of the OH groups have been systematically classified. Molecular asymmetry can be generated not only by different substituents but also by conformational isomerism. The numbers of chiral isomers are 17 for tetra-O-substituted calix[4]arenes, 9 for tri-O-substituted calix[4]arenes, 3 for di-O-substituted calix[4]arenes, and 0 for mono-O-substituted calix[4]arenes. Chiral calix[4]arenes can also be designed by the introduction of a substituent into the m-position of a phenol unit or by the use of a dissymmetric ‘stapling reaction’ in proximal phenol units. In p-tert-butylcalix[6]arene, the conformational behaviour is totally different from that in p-tert-butylcalix[4]arene. A large degree of conformational freedom remains in the framework, and both ‘oxygen-through-the-annulus rotation’ and ‘para-substituent-through-the-annulus rotation’ can take place. However, when metal cations are bound to calix[6]aryl esters, the conformation is changed to a cone type. Bridging and capping are powerful methods to immobilize the conformation of calix[6]arenes. In addition, definitive evidence for ring immobilization was obtained from the absence of racemization in the chiral calix[6]arene. A successful example of chiral recognition for α-amino acid derivatives was achieved by using chiral homooxacalix[3]arene which has ‘pseudo C₂ symmetry’. These examples indicate that calixarenes serve as rigid and conformationally diversiform platforms for the design of novel functional supramolecules.     

Studies on Properties of p—Nitrophenylazo Calix[4]arene Derivatives

The p-nitrophenylazo calix[4] arene derivatives la-ld with nonlinear optical(NLO)properties were prepared by the diazo-coupling reaction of calix[4]arene with p-nitrophenyl diazonium.The diazotization reaction of p-nltroaniline was caried out with isoamyl nitrite as a source of nitrous acid in EtONa/EtOH under refluxing conditon.X-Ray crystallographic analysis and ^1H NMR sptectra reveal that they exist as cone conformation in crystal state or in soution.HRS measurements at 1064 nm in THF indicate that p-nitrophenylazo calix[4]arenes have higher hyperpolarizability βz values than the corresponding reference compound 4-(4-nitrophenylazo)-2,6-dimethyl-phenol,without red shift of the charge transfer band.The tetrakis p-nitropheylazo calix[4]arene(2)with longer alkyl chains can form monolayer aht the air/water interface.     

Constructing a Nonfluorescent Conformation of AIEgen: A Tetraphenylethene Embedded in the Calix[4]arene's Skeleton

Two novel 1,1‐diphenylmethylidene decorated calix[4]arenes, ( Calix‐DPE(OCH₃)₄ and Calix‐DPE(OH)₄ ), were designed and prepared. The tetraphenylethene (TPE) unit is embedded in the calix[4]arenes skeleton, so the conformation of tetraphenylethene unit is significantly affected by the conformation of calix[4]arene. Unlike the Calix‐DPE(OCH₃)₄ , the Calix‐DPE(OH)₄ does not show the aggregation‐induced emission (AIE) phenomena in solution or the crystal state because of the presence of intramolecular hydrogen bonding, which leads to a cone conformation for the calix[4]arene skeleton in which the embedded phenyl rings of the TPE have to take an almost perpendicular configuration to the C=C bond. This result provides direct evidence that the maximal cross‐chromophore π‐conjugation within the tetraphenylethene is one of the prerequisites of switching on its AIE. This offers the possibility of switching the emission of TPE by conformation changes.     

Cooperative intramolecular hydrogen bond and conformations of thiocalix[4]arene molecules

The joint FTIR spectroscopic study and ab initio quantum-chemical calculations (HF/3-21G and PBE/TZ2P methods) showed that thiocalix[4] arene molecules adopt the cone conformation in CCl₄ solutions. The weakening of the cooperative intramolecular H bond in thiocalix[4]arenes compared to the corresponding calix[4]arenes can be due to the larger thiocalixarene macrocycle, bifurcated hydrogen bond in it, and electron density transfer from the bridging S atom to the benzene ring.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Synthesis, NMR, X-ray structural analyses and complexation studies of new Ag selective calix[4]arene based dipodal hosts—a co-complexation of neutral and charged species

New podands based on the p-tert-butylcalix[4]arene unit with substitution at the lower rim incorporating imine units, have been synthesized in high yield by simple condensation method. These podands have been shown to extract and transport Ag⁺ selectively over alkali, alkaline earth metal cations, Zn²⁺, Pb²⁺ and Hg²⁺ ions, from neutral aqueous phase to organic phase. In all the ligands the calix unit has been found to be present in a cone conformation except for the one having pyridine as end group, at the ortho position. It has been isolated in two conformations; cone and 1,2-alternate. To the best of our knowledge, this may be the first 1,3-lower rim substituted calix[4]arene to exist in a 1,2-alternate conformation and is among a few known compounds with this conformation in the general class of calix[4]arenes. A complex of this ligand, which happens to be the highest extractant of Ag⁺ has been isolated and characterized using mass, ¹H and ¹³C NMR spectroscopy's and elemental analysis. The spectroscopic evidence and molecular modelling studies performed on the complex suggest a participation of the imine and pyridine nitrogens and two of the ether oxygens in coordination to the metal ion. The X-ray crystal structures of three of the ligands establish the formation of inclusion complexes with polar acetonitrile solvent molecules. The ¹H and ¹³C NMR spectra of all the compounds, taken in CDCl₃, show the presence of acetonitrile molecules in the cavity of the calix[4]arene, indicating inclusion of the neutral guest molecules in the solution phase as well. For one of the podands X-ray crystal structure has shown a formation of clatharate complex of chloroform with the ligand which has rarely been found in the case of calix[4]arenes.     

Upper Rim Diester—bridged Calix[4] arenes and Oligocalix [4]—arenes：the Effects of the Length of Bridged Reagents on Their Distribution

A series of monobridged calix [4] arenes 3a-f,cyclic biscalix-[4] arenes 4a-f ,diametrically bridged at the upper rim with saturated aliphatic diester chians,have been synthesized,The results at diluted conditions show that the percentage of yields of mono-,bis- and oligo-calix[4] arenes are related to the legth of the chains ,With the shortening of the chains ,the percent-age of monocalix[4] arenes decreased ,All the calix [4] arene moieties are in a cone conformaiton according to the AB quar-tet pattern of the methylene protons between the phenolic rings in the ^1H NMR spectra.     

Potentiometric Ag+ Sensors Based on Conducting Polymers: A Comparison between Poly(3,4‐ethylenedioxythiophene) and Polypyrrole Doped with Sulfonated Calixarenes

Potentiometric Ag⁺ sensors were prepared by galvanostatic electropolymerization of 3,4‐ethylenedioxythiophene (EDOT) and pyrrole (Py) on glassy carbon electrodes by using sulfonated calixarenes as doping ions. Poly(3,4‐ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy) doped with p‐sulfonic calix[4]arene (C4S), p‐sulfonic calix[6]arene (C6S) and p‐sulfonic calix[8]arene (C8S) were compared. PEDOT and PPy doped with poly(styrene sulfonate) (PSS) were also included for comparison. The analytical performance of the conducting polymer‐based Ag⁺ sensors was studied by potentiometric measurements. All conducting polymer and dopant combinations showed sensitivity and selectivity to Ag⁺ compared to several alkali, alkaline‐earth, and transition‐metal cations. The type of the conducting polymer used for the fabrication of the electrodes was found to have a more significant effect on the selectivity of the electrodes to Ag⁺ than the ring size of the sulfonated calixarenes used as dopants. Selected conducting polymer‐based sensors were studied by cyclic voltammetry (CV) and energy dispersive analysis of X‐rays (EDAX) measurements. Results from the EDAX measurements show that both PEDOT‐ and PPy‐based membranes accumulate silver.     

Azocalixarenes. 6: Synthesis, complexation, extraction and thermal behaviour of four new azocalix[4]arenes

Four new azocalix[4]arenes {5,11,17,23-tetrakis[(2-hydroxy-5-tert-butylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (1), 5,11,17,23-tetrakis[(2-hydroxy-5-nitro phenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (2), 5,11,17,23-tetrakis[(2-amino-5-carboxylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (3) and 5,11,17,23-tetrakis[(1-amino-2-hydroxy-4-sulfonicacidnapthylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (4)} have been synthesized from p-tert-butylphenol, p-nitrophenol, p-aminobenzoic acid and 1-amino-2-hydroxy-4-sulphonic acid by diazo coupling reaction with p-aminocalix[4]arene. The resulting ligands (1–4) were treated with three transition metal salts (e.g., CuCl₂·2H₂O, NiCl₂·6H₂O or CoCl₂·6H₂O). Cu(II), Ni(II) and Co(II) complexes of the azocalix[4]arene derivatives were obtained and characterized by UV-vis, IR, ¹H-NMR spectroscopic techniques and elemental analysis. All the complexes have a metal:ligand ratio of 2:1. The Cu(II) and Ni(II) complexes of azocalix[4]arenes are square-planar, while the Co(II) complexes of azocalix[4]arenes are octahedral with water molecules as axial ligands. The solvent extraction of various transition metal cations from the aqueous phase to the organic phase was carried out by using azocalix[4]arenes (1–4). It was found that, azocalix[4]arenes 1, 2 and 3 examined selectivity for transition metal cations such as Ag⁺, Hg⁺ and Hg²⁺. In addition, the thermal stability of metal:azocalix[4]arene complexes were also reported. Dedicated to Prof. Dr. Mustafa Yılmaz on the occasion of his 50th birthday     

Competitive solvent extraction of alkaline earth metals by ionizable nano-baskets of calixarene

The competitive solvent extraction of alkaline earth metals using different nano-baskets was investigated. The novelty of this work is to study the correlations between the isomer structure of calixarenes and their extraction properties. The objective was to quantify the effects of aryl groups in the ionisable pendant moieties, calixarene conformation, steric orientations (cis- and trans-) and relative positions (ortho- and para-) of pendant moieties upon the extraction efficiency, pH_1/2 and the selectivity of calix[4]arene complexes. Alkaline earth metals were extracted from aqueous solutions into chloroform by di-ionisable calix[4]arenes and were measured using ion chromatography. The results revealed that alternation of aryl group in the pendant moieties, changing their orientation from cis- to trans-analogues as well as from ortho- to para- analogues, showed no changes in the selectivity, the extraction efficiency and the pH_1/2 of calix[4]arene complexes. Changing the scaffold of calixarene's ring to the cone, 1,2-alternate and partial-cone conformers altered their complexation ability towards alkaline earth metals and their extraction efficiency.     

Determination of Tryptophan using a p-Sulfonated Calix [4,6,8]arene Modified Gold Electrode

The ability of p-sulfonated calix[n]arenes (n = 4, 6, 8) to form complexes with tryptophan was studied. The electrochemical properties of these complexes immobilized on gold surfaces were examined by cyclic voltammetry. Parameters affecting the performance of the modified electrodes including the arene concentration, scan rate, applied potential, and pH were optimized. Under the optimal conditions, the method had a linear response to tryptophan between 1 × 10^?7 M and 1 × 10^?5 M with a detection limit of 3 × 10^?8 M. The interaction of the tryptophan–p-sulfonated calix[4]arene complex was more stable than the tryptophan–p-sulfonated calix[6]arene and p-sulfonated calix[8]arene complexes. Molecular modeling calculations indicated that electrostatic interactions and structural matching effects were predominant stabilizing factors. The modified electrodes demonstrated good reproducibility and high selectivity, illustrating their effectiveness for analytical measurements.     

Synthesis of （p—Substituted phenyl）azo Calix[4] arenes

A novel method for the preparation of chromogenic calixarenes with azo groups was reported.p-Substituted(-NO2,-CH3,-Cl)amilines were diazotized with isoamyl nitrite in EtONa/EtOH under refluxing condition.Fifteen mono-,bis-,tris-and tetrakis(p-substituted phenyl)azo calix[4]arenes (including proximal and distal isomers) were obtainged respectively by diazo-coupling in different molar ratio to calix[4]arenes(1) under pH=7.5-9.0 in non-aqueous solution at 0-5℃.^1H NMR and ^13C NMR spectra of (p-substtituted phenyl)azo calix[4]-arenes indicated that they existed in cone conformation in solution.     

BODIPY appended cone-calix[4]arene: selective fluorescence changes upon Ca binding

BODIPY appended new calix[4]arene diethyl ester (1) has been synthesized in the cone conformation. With respect to fluorescence intensity changes upon metal ion complexation, 1 shows a Ca²⁺ ion selectivity over other metal cations. Presence of two proximal hydroxyl groups and two facing ethyl esters in BODIPY-calix[4]arene were observed to play an important role in exhibiting its selective Ca²⁺ ion binding.