Putting Electrospun Nanofibers to Work for Biomedical Research

Electrospinning has been exploited for almost one century to process polymers and related materials into nanofibers with controllable compositions, diameters, porosities, and porous structures for a variety of applications. Owing to its high porosity and large surface area, a non‐woven mat of electrospun nanofibers can serve as an ideal scaffold to mimic the extracellular matrix for cell attachment and nutrient transportation. The nanofiber itself can also be functionalized through encapsulation or attachment of bioactive species such as extracellular matrix proteins, enzymes, and growth factors. In addition, the nanofibers can be further assembled into a variety of arrays or architectures by manipulating their alignment, stacking, or folding. All these attributes make electrospinning a powerful tool for generating nanostructured materials for a range of biomedical applications that include controlled release, drug delivery, and tissue engineering.

     

刺激响应性电纺纳米纤维

采用静电纺丝法制备的、平均直径通常小于1000 nm的刺激响应性电纺纳米纤维是一种可响应外界刺激而发生物理化学性能改变的智能聚合物纤维,由它形成的纤维膜具有比表面积大、孔隙率高、对外界刺激产生响应速度快等优点,因此在诸多领域显示出诱人的应用前景,是近年来受到国内外高度关注的一种智能纳米材料。本文首先归纳了制备刺激响应性电纺纳米纤维的三种方法。然后从成纤聚合物的合成或选用、纺丝液配制、静电纺丝和后处理4个方面讨论了制备过程中影响纳米纤维尺寸、结构和刺激响应性等性能的主要因素。接下来重点述评了除电场外的其他各种刺激响应性电纺纳米纤维的设计及其构建研究进展,另外介绍了这些刺激响应性电纺纳米纤维膜在分离与纯化、药物控制释放、伤口敷料、细胞培养、传感器与检测等方面的应用研究情况。最后,就它们的未来研究方向进行了展望。     

Novel Polyelectrolyte Carboxymethyl Konjac Glucomannan–Chitosan Nanoparticles for Drug Delivery

Summary: Carboxymethyl Konjac Glucomannan–Chitosan (CKGM‐CS) nanoparticles, which are well dispersed and stable in aqueous solution, were spontaneously prepared under very mild conditions by polyelectrolyte complexation. Investigations of the physicochemical properties of these nanoparticles were undertaken. This study showed that the nanoparticulate system driven by complex formation has potential as an advanced drug‐delivery system for water‐soluble drugs.

Preparation mechanism of CS–CKGM nanoparticles.     

Two‐Phase Electrospinning to Incorporate Polyelectrolyte Complexes and Growth Factors into Electrospun Chitosan Nanofibers

Growth factors are potent signaling proteins for tissue engineering, but they are susceptible to loss of activity when exposed to solvents used for polymer processing. This work explores preservation of fibroblast growth factor‐2 (FGF‐2) activity in chitosan nanofibers using two‐phase electrospinning via a compound coaxial needle and from a water‐in‐oil emulsion FGF‐2 in aqueous poly(vinyl alcohol) is added on either the inside (A/O) or the outside (O/A) of an organic chitosan phase, using the compound needle. FGF‐2 is further stabilized by complexation to heparin‐based nanoparticles. The emulsion method does not result in detectable incorporation of FGF‐2. The A/O fibers incorporate the highest amount of FGF‐2. Nanoparticle‐stabilized FGF‐2 in A/O nanofibers is most active toward bone‐marrow stromal cells.

     

Electrospun Hybrid Nanofibers Based on Chitosan or N‐Carboxyethylchitosan and Silver Nanoparticles

Hybrid nanofibers from chitosan or N‐carboxyethylchitosan (CECh) and silver nanoparticles (AgNPs) were prepared by electrospinning using HCOOH as a solvent. AgNPs were synthesized in situ in the spinning solution. HCOOH slowed down the cross‐linking of the polysaccharides with GA enabling the reactive electrospinning in the presence of poly(ethylene oxide) (PEO). EDX analyses showed that AgNPs are uniformly dispersed in the nanofibers. Since AgNPs hampered the cross‐linking of chitosan and CECh with GA in the hybrid fibers, the imparting of water insolubility to the fibers was achieved at a second stage using GA vapors. The surface of chitosan/PEO/AgNPs nanofibers was enriched in chitosan and 15 wt.‐% of the incorporated AgNPs were on the fiber surface as evidenced by XPS.

     

Electrospun chitosan-coated fibers of poly(L-lactide) and poly(L-lactide)/poly(ethylene glycol): preparation and characterization

Fibrous poly(L-lactide) (PLLA) and bicomponent PLLA/poly(ethylene glycol) mats were prepared by electrospinning and then were coated with chitosan. The presence of chitosan coating was proved by scanning electron microscopy and by fluorescence microscopy. On contact with blood, the chitosan coating led to changes in erythrocyte shape and in their aggregation. The haemostatic activity of the mats increased with increasing chitosan content. Microbiological studies against Staphylococcus aureus revealed that the chitosan coating imparts antibacterial activity to the hybrid mats. The combined haemostatic and antibacterial activities render these novel materials suitable for wound-healing applications.     

Solid Dispersions of Ketoprofen in Drug-Loaded Electrospun Nanofibers

Solid dispersions of ketoprofen in nanofibers were prepared using electrospinning process with polyvinylpyrrolidone as the filament-forming polymer. Results from differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, and fourier-transform infrared suggested that ketoprofen was well distributed in the polymer nanofibers in an amorphous solid dispersion state due to the hydrogen bonding between them. In vitro wetting and dissolution tests showed that the nanofibers could absorb water from the wet papers and wetted within several seconds, and ketoprofen could be exhausted within 30 seconds. Electrospinning is a useful process for the preparation of solid dispersions.     

Disposable Electrospun Electrodes Based on Conducting Nanofibers

A new approach for the fabrication of disposable electrochemical surfaces is presented. Conducting fibers have been produced by a two‐step process. Firstly, a fine web mat composed of nylon‐6 and ferric chloride fibers (with diameters of about 200 nm) were electrospun on a flat collector. Afterwards, the electrospun mat was exposed to pyrrole vapor under controlled dry atmosphere until each nylon thread was fully coated with a conducting polypyrrole layer. The conducting fiber mat was finally integrated within an electrochemical cell and used as a disposable sensor device. The suitability of the sensor was tested using phosphate and carbonate organic anions. The large scale fabrication of conducting tissue, in the form of a fine web of spun nanofibers, is relatively fast and inexpensive, and it paves the way to the build up of new disposable electrodes.     

壳聚糖静电纺纳米纤维的制备和特点

对纯壳聚糖、壳聚糖和聚合物的混合物、壳聚糖和蛋白质的混合物、壳聚糖衍生物、壳聚糖和无机纳米颗粒的混合物等静电纺纳米纤维的制备和特点进行了综述,对部分壳聚糖纳米纤维的应用进行了简述。     

Electrospun Nanofibers Modified with Phospholipid Moieties for Enzyme Immobilization

Summary: PANCMPCs containing phospholipid side moieties were electrospun into nanofibers with a mean diameter of 90 nm. Field emission SEM was used to characterize the morphologies of the nanofibers. These phospholipid‐modified nanofibers were explored as supports for enzyme immobilization due to the characteristics of excellent biocompatibility, high surface/volume ratio, and porosity, which were beneficial to the catalytic efficiency and activity of immobilized enzymes. Lipase from Candida rugosa was immobilized on these nanofibers by adsorption. Preliminary results indicated that the properties of the immobilized lipase on these phospholipid‐modified nanofibers were greatly promising.

Schematic representation of the structure and electrostatic properties of phospholipid‐modified nanofibers.     

Electrospun Alginate Nanofibers with Controlled Cell Adhesion for Tissue Engineeringa

Alginate, a natural polysaccharide that has shown great potential as a cell scaffold for the regeneration of many tissues, has only been nominally explored as an electrospun biomaterial due to cytotoxic chemicals that have typically been used during nanofiber formation and crosslinking. Alginate cannot be electrospun by itself and is often co‐spun with poly(ethylene oxide) (PEO). In this work, a cell adhesive peptide (GRGDSP) modified alginate (RA) and unmodified alginate (UA) were blended with PEO at different concentrations and blending ratios, and then electrospun to prepare uniform nanofibers. The ability of electrospun RA scaffolds to support human dermal fibroblast cell attachment, spreading, and subsequent proliferation was greatly enhanced on the adhesion ligand‐modified nanofibers, demonstrating the promise of this electrospun polysaccharide material with defined nanoscale architecture and cell adhesive properties for tissue regeneration applications.

     

Biodegradable Polymer Nanocylinders Fabricated by Transverse Fragmentation of Electrospun Nanofibers through Aminolysis

Biodegradable polymeric nanocylinders were fabricated by segmental degradation of electrospun nanofibers. Poly(L ‐lactic acid) (PLA) was electrospun to produce non‐crystalline nanofibers that were immediately treated with amino group‐containing strong bases to fabricate semi‐crystalline PLA nanocylinders with tunable aspect ratio. The formation of PLA nanocylinders was attributed to two concurrent events occurring during the aminolysis reaction: (i) development of stacked lamellae and (ii) transversely oriented degradation and fragmentation of the amorphous gaps between lamellae, both responsible for the fragmentation of PLA nanofibers into uniformly shaped nanocylinders. The aspect ratio of PLA nanocylinders was tunable by varying aminolysis time and controlling nanofiber diameter.

     

Electrospun PDA‐CA Nanofibers toward Hydrophobic Coatings

Nowadays, encapsulated dyes in a polymeric matrix have opened up new perspectives in many applications such as filtration of subatomic particles, composite reinforcement, multifunctional membranes, tissue engineering scaffolds, wound dressing, coatings, medical purposes as well as sensors. In the presented work, we report on electrospinning neat peryelene dianhydride based thermoplastic elastomers. Perylene‐3, 4,9, 10‐tetracarboxylic dianhydride (PDA) is encapsulated into cellulose acetate (CA) electrospun fibers, which was prepared from 12 % cellulose acetate solution, at 20 kV with a distance of 10 cm. The flow rate was 0.2 ml · h^–1. These water repellent nanofibrous coatings are anticipated to serve as hydrophobic coatings. Scanning electron microscope is used to study the properties of the electrospun PDA‐CA nanofibers.     

Composite Polyamide 6/Polypyrrole Conductive Nanofibers

Conductive Polyamide 6 (PA‐6) nanofibers were prepared by making a conductive polypyrrole coating obtained by a polymerization of pyrrole molecules directly on the fiber surface. A solution of PA‐6 added with ferric chloride in formic acid has been electrospun and the fibers obtained showed an average diameter of 260 nm with a smooth surface. The fibers have been then exposed to pyrrole vapours and a compact coating of polypyrrole was formed on the fiber surface. The growth of the coating was monitored by measuring the increment of the fiber diameter and by FT‐IR spectroscopy. The same technique was used to study the interaction between the ferric chloride and the polyamide chains. The polypyrrole coating on the fibers turned out to be conductive with a pure resistive characteristic and the stability of the conductivity was evaluated in air at room temperature.

     

Polylactic Acid Film Coated with Electrospun Gelatin/Chitosan Nanofibers Containing Betel Leaf Ethanolic Extract: Properties,Bioactivities, and Use for Shelf-Life Extension of Tilapia Slices

Gelatin/chitosan solutions incorporated with betel leaf ethanolic extract (BLEE) at varying concentrations were electrospun on polylactic acid (PLA) films. Nanofibers with different morphologies, as indicated by scanning electron microscopy (SEM), were formed after solutions of gelatin/chitosan with and without BLEE were electrospun on PLA films at a constant voltage (25 kV) and a feed rate of 0.4 mL/h. Beaded gelatin/chitosan nanofibers (GC/NF) were found, particularly when high concentrations of BLEE were encapsulated. PLA films coated with GC/NF, and with BLEE added, showed antioxidant and antibacterial activities, which were augmented by increasing BLEE concentrations. Lower water vapor permeability and enhanced mechanical properties were achieved for GC/NF-coated PLA film (p < 0.05). Microbial growth and lipid oxidation of Nile tilapia slices packaged in PLA film coated with GC/NF containing 2% BLEE were more retarded than those packaged in low-density polyethylene (LDPE) bags over refrigerated storage of 12 days. Based on microbial limits, the shelf-life was escalated to 9 days, while the control had a shelf-life of 3 days. Therefore, such a novel film/bag could be a promising active packaging for foods.     

Electrospun polymer nanofibers: Mechanical and thermodynamic perspectives

This article reviews and discusses some open problems concerning polymer materials of reduced sizes and dimensions. Such objects exhibit exceptional physical properties when compared with their macroscopic counterparts. More specifically, abrupt increases in polymer nanofiber elastic modulus have been observed when diameters drop below a certain value. In addition, temperature dependence of elastic modulus is highly influenced by fiber diameter. Mechanical (macroscopic) analyses have failed to provide satisfactory explanations for the mechanisms ruling such features, calling for detailed microscopic examination of the systems in question. A hypothesis bridging the current knowledge gaps is presented. The key element of this hypothesis is based on confinement of the supermolecular microstructure of polymer nanofibers and its dominant role in the deformation process. This suggestion challenges the commonly held view suggesting that surface effects are the most significant parameters impacting mechanical and thermodynamic nanofiber behaviors. The review will focus on the mechanical and thermodynamic properties of electrospun polymer nanofibers, selected as representatives of nanoscale polymer objects. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

静电纺丝纳米纤维在燃料电池质子交换膜中应用的研究进展

保护环境,开发环保型能源,对人类和社会具有重要意义。 质子交换膜燃料电池由于具有燃料转化率较高和无污染的优点,备受关注。 静电纺丝纳米纤维具有比表面积大、高孔隙率和三维的相互连通的网状结构等特点,可以在燃料电池质子交换膜中得到广泛应用。 静电纺丝纳米纤维类复合质子交换膜具有较高的质子传导率,较低的燃料渗透率,较好的化学稳定性能、热稳定性能和机械性能。 本文首先介绍了质子交换膜燃料电池,然后从不同的离子型聚合物基质复合质子交换膜的类别出发,介绍了静电纺丝纳米纤维在Nafion、磺化聚酰亚胺(SPI)、聚苯并咪唑(PBI)、磺化聚醚醚酮(SPEEK)等不同种类的离子型聚合物质子交换膜中的研究现状及作用机理,同时对静电纺丝纳米纤维在质子交换膜的应用方面存在的问题及应用前景做了评论和展望。     

Ultrafine Electrospun Conducting Polymer Blend Fibers and Their Photoluminescence Properties

Ultrafine poly(2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylene-vinylene) (MEH-PPV)/polyvinylpyrrolidone (PVP) blend fibers with the average diameters ranging from 625 nm to 1.46 µm were prepared by electrospinning of polymer blend solutions in the mixed solvent of chlorobenzene and methanol. The average diameter of fibers was found to decrease with initial increase in the applied electrical potential and composition of MEH-PPV, reach a minimum value at an intermediate value, and increase with further increase in the applied electrical potential and composition of MEH-PPV, while it was found to decrease with increasing collection distance. PVP was easily removed from MEH-PPV/PVP fibers by the Soxhlet extraction, and after the removal of PVP at high composition of MEH-PPV, pure MEH-PPV fibers were obtained as a ribbon-like structure aligned with wrinkled surface in fiber direction. The increase in MEH-PPV composition and the removal of PVP from as-spun MEH-PPV/PVP fibers resulted in a significant blue-shift in UV-Vis absorption peak and red-shift in PL peak.     

Green Electrospun Silk Fibroin Nanofibers Loaded with Cationic Ethosomes for Transdermal Drug Delivery

Transdermal drug delivery system(TDDS) facilitates the controlled release of active ingredients penetrating through the skin, avoiding the liver first pass effect. Electrospinning is a simple process to fabricate ultrafine fibers with a higher specific surface area, making them excellent candidates for drug delivery. In current work, a novel silk fibroin(SF) nanofiber loaded with cationic ethosomes(CEs) was prepared via green electrospinning. The data of Fourier transform infrared spectroscopy(FTIR) and laser scanning confocal microscopy(LSCM) confirmed the existence of CEs in the SF nanofibers. The morphology of the nanofibers was not significantly affected by the incorporation of CEs as shown by scanning electron microscopy(SEM) images. The CEs-loaded SF nanofibrous patch (CEs-SFnP) showed good cytocompatibility as proved by both cell counting Kit-8(CCK-8) assay and SEM. Using doxorubicin hydrochloride(Dox) as a model drug, the transdermal performance of CEs-SFnP was evaluated through Franz diffusion cell against mouse skin. The results indicated that CEs-SFnP can effectively deliver drug into the skin, with a much higher permeation rate than the normal nanofibers without CEs. The as-spun CEs-SFnP in this study could find promising applications in TDDS.