On Toughness and Stiffness of Poly(butylene terephthalate) with Epoxide‐Containing Elastomer by Reactive Extrusion

Summary: To obtain a balance between toughness (as measured by notched impact strength) and elastic stiffness of poly(butylene terephthalate) (PBT), a small amount of tetra‐functional epoxy monomer was incorporated into PBT/[ethylene/methyl acrylate/glycidyl methacrylate terpolymer (E‐MA‐GMA)] blends during the reactive extrusion process. The effectiveness of toughening by E‐MA‐GMA and the effect of the epoxy monomer were investigated. It was found that E‐MA‐GMA was finely dispersed in PBT matrix, whose toughness was significantly enhanced, but the stiffness decreased linearly, with increasing E‐MA‐GMA content. Addition of 0.2 phr epoxy monomer was noted to further improve the dispersion of E‐MA‐GMA particles by increasing the viscosity of the PBT matrix. While use of epoxy monomer had little influence on the notched impact strength of the blends, there was a distinct increase in the elastic stiffness. SEM micrographs of impact‐fracture surfaces indicated that extensive matrix shear yielding was the main impact energy dissipation mechanism in both types of blends, with or without epoxy monomer, and containing 20 wt.‐% or more elastomer.

SEM micrographs of freeze‐fractured surfaces of PBT/E‐MA‐GMA blend illustrating the finer dispersion of E‐MA‐GMA in the presence of epoxy monomer.     

Photocrosslinking Polymerization of Methacrylate Modified Triethoxysilanes Polycondensates and Multifunctional Methacrylates

Densely crosslinked polymer networks were prepared by fast, visible light‐induced polymerization at 20–22 °C. The two methacrylate functionalized triethoxysilanes polycondensates (MSiP) either alone, or in a mixture with methacrylate modified oxozirconium clusters, were polymerized separately and as comonomers to multimethacrylate monomers in a weight ratio of 1:0.9. Pure organic networks based on 1,6‐bis(2‐hydroxy‐3‐methacryloyloxyethoxycarbonylamino)‐2,2,4‐trimethylhexane (UDMA) were used for comparison in the same ratio to other comonomers. The networks based on organic bifunctional monomers showed high, around 85% conversion of double bonds. Nevertheless the non‐reacted monomer that migrates to the toluene amounts from 5.6 to 11.65 wt.‐%. Copolymerization of UDMA with tetrafunctional components resulted in networks with higher residual unsaturation up to 27.7%. This result points out the important role that functionality and the spacer structure between the monomer double bonds play in the extent of reaction. Based only on modified inorganic Si? O? Si nano‐structures the networks are characterized by nearly complete building up of MSiP in the network, extreme crosslinks density, and mostly less than 1 wt.‐% of soluble substances. However, residual unsaturations exceeded 22%. The advantage of copolymerization of MSiP with proper organic comonomers as potential solvent free matrices for dental composites was demonstrated by a network consisting of MSiP II and UDMA. The 13.7% of unreacted double bonds and 99.65 wt.‐% gel content approximated efforts to minimize residual unsaturation and maximize monomer conversion in cured networks.

Monomers used for the synthesis of the densely crosslinked polymer.     

Waste and Virgin LDPE/PET Blends Compatibilized with an Ethylene‐Butyl Acrylate‐Glycidyl Methacrylate (EBAGMA) Terpolymer, 1

Summary: This work is aimed at studying the morphology and the mechanical properties of blends of low density polyethylene (LDPE) and poly(ethylene terephthalate) (PET) (10, 20, and 30 wt.‐% of PET), obtained as both virgin polymers and urban plastic waste, and the effect of a terpolymer of ethylene‐butyl acrylate‐glycidyl methacrylate (EBAGMA) as a compatibilizer. LDPE and PET are blended in a single screw extruder twice; the first extrusion to homogenize the two components, and the second to improve the compatibilization degree when the EBAGMA terpolymer is applied. Scanning electron microscopy (SEM) analysis shows that the fractured surface of both the virgin polymer and the waste binary blends is characterized by a gross phase segregation morphology that leads to the formation of large PET aggregates (10–50 µm). Furthermore, a sharp decrease in the elongation at break and impact strength is observed, which denotes the brittleness of the binary blends. The addition of the EBAGMA terpolymer to the binary LDPE/PET blends reduces the size of the PET inclusions to 1–5 µm with a finer dispersion, as a result of an improvement of the interfacial adhesion strength between LDPE and PET. Consequently, increases of the tensile properties and impact strength are observed.

SEM micrographs of the fracture surface of a waste 70/30 LDPE/PET blend (R30) and of its blend with 15 pph of EBAGMA (R30C). Magnification × 1 000.     

Molecular and Morphological Characterization of Immiscible SAN/EPDM Blends Filled by Nano Filler

The compatibilizing effect of nano sized calcium carbonate filler on immiscible blends of styrene‐co‐acrylonitrile/ethylene propylene diene (SAN/EPDM) was examined. The surface energy of the calcium carbonate was modified by stearic acid. The compatibility of SAN/EPDM blends was studied by following the glass transition temperature T_g by DSC. SEM was used to observe the blend morphology and the X‐ray analyzer was used to detect the calcium from filler in samples. Mechanical properties of the blends were determined, and related to changes of polymer‐filler interactions and morphology. The results suggest that the morphology of the SAN/EPDM blends studied was affected by the reduction of surface energy of the filler.

SEM micrograph of an SAN/EPDM blend with 5% of maximally treated filler.     

Thermal Characterization of Upper Critical Solution Temperature m‐LLDPE/Poly(ethylene‐ran‐butene) Elastomer Blends

Summary: The phase and thermal characteristics of blends consisting of linear low‐density polyethylene (LLDPE) (0.7 mol‐% hexene copolymer) and poly(ethylene‐ran‐butene) (PEB) (26 mol‐% butene copolymer) have been investigated using optical microscopy (OM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). An upper critical solution temperature of 162 °C was exhibited. The addition of PEB not only slowed the overall crystallization rate of LLDPE but also changed the distribution of lamellar thickness or perfection of LLDPE crystals. The equilibrium melting temperature of LLDPE in the blends was reduced and kept relatively constant in the bi‐phase state. The blends showed a single‐stage degradation and an intermediate thermal stability between those of the individual components. It could be attributed to their homogeneous states at degradation temperatures and the similar decomposing mechanisms of two components. The kinetic analysis of thermal degradation also confirmed the above results.

Phase diagram of LLDPE/PEB blends.     

Polyolefin/Lignosulfonate Blends, 9

Summary: In the present study, the compatibility, properties and degradability of polyolefin/lignin blends have been studied. Blends of three maleic anhydride grafted copolymers of ethylene‐propylene rubbers containing various content of functional groups with epoxy‐modified lignosulfonate have been investigated by microscopy, X‐ray diffraction, surface and mechanical indices determination, electron spin resonance, IR spectroscopy, differential scanning calorimetry and thermogravimetry. To assess the environmental degradation characteristics, the behavior of the blends during soil burial test has been investigated. The influence of the buried polymer blends on the physiological vegetative processes of the Vicia X Hybrida hort plant has been monitored.

Optical microscopy images of blend EP‐g‐MA 0.3/5 LER, undegraded (left) and degraded (right).     

A Novel Route to Multiphase Polymer Systems Containing Nano‐Droplets: Radical Polymerization of Vinylic Monomers in Gelled Water‐in‐Oil Miniemulsions

Summary: A new strategy for the synthesis of composite polymers with larger volume fraction of aqueous inclusions less than 1 µm in diameter is presented. A water‐in‐oil miniemulsion of aqueous droplets in a continuous, cross‐linkable monomer phase is prepared. The addition of an organo‐gelator allows the immobilization of the droplets in a solid gel, thus avoiding the usual demixing upon polymerization of the continuous phase. This pregelled system is then converted into a composite polymer by photoinitiated free radical polymerization. Such coatings may be used for an improved climate control of buildings or as a deposit for the controlled release of actives from polar nano‐droplets.

SEM image of a cross‐linked composite polymer showing controlled droplet inclusions with a maximal diameter of 500 nm.     

Monodisperse Silica‐Polymer Core‐Shell Microspheres via Surface Grafting and Emulsion Polymerization

We describe a flexible method for preparing monodisperse silica‐polystyrene core‐shell microspheres. In this method, silica nanoparticles grafted with 3‐(trimethoxysilyl)propyl methacrylate (MPS) were employed as seeds in an emulsion polymerization. The thickness of the shells could be changed through varying the amount of the monomer. The monodispersity and diameters of the core‐shell microspheres were found to depend on the size of the grafted silica nanoparticles and the concentration of emulsifier. In addition, we investigated the formation mechanism of the core‐shell microspheres.

Schematic outline of the experimental procedure and TEM image of the monodisperse silica/PS core‐shell microspheres; inset: grafted silica nanoparticles (scale bar = 200 nm).     

Temperature Sensitive Behavior of Poly(N‐isopropylacrylamide) Grafted Onto Electron Beam‐Irradiated Poly(propylene)

Summary: N‐Isopropylacrylamide (NIPAAm) was graft‐polymerized from its acetone solution onto poly(propylene) (PP) films, after electron‐beam irradiation in the presence of air oxygen. The effects of pre‐irradiation dose as well as monomer concentration, reaction temperature and reaction time on the grafting efficiency were investigated. Typical conditions for achieving maximum grafting yield were observed for 1 M monomer concentration, after PP pre‐irradiation with a 300 kGy dose and a reaction temperature of 50 °C. The location of the graft polymerization was examined by different methods including measurements of dimensional variations, calorimetry, SEM and AFM. The temperature‐responsive behavior of grafted copolymer was studied by swelling and contact angle measurements at different temperatures.

Temperature dependence of the swelling ratio in water as a function of temperature.     

Thermal and Thermomechanical Behaviour of Polycaprolactone and Starch/Polycaprolactone Blends for Biomedical Applications

Summary: Polycaprolactone (PCL) and starch/PCL blends (SPCL) are shown to have the potential to be used in a range of biomedical applications and can be processed with conventional melting‐based procedures. In this paper, the thermal and thermomechanical analyses of PCL and SPCL were performed, using DSC, optical microscopy and DMA. Starch effectively increased the non‐isothermal crystallisation rate of PCL. Non‐isothermal crystallisation kinetics was analyzed using Ozawa model, and a method, which combines the theories of Avrami and Ozawa. Starch effectively reinforced PCL and enhanced its damping properties, which indicated that SPCL could be more suitable than PCL in some biomedical applications, as it might help in the dissipation of the mechanical energy generated by the patient movements.

Dynamic mechanical behaviour of PCL and SPCL at 1 Hz.     

Artificial Opals as Effect Pigments in Clear‐Coatings

Summary: In this paper, we describe the use of artificial opals from polymer beads as effect pigments in transparent industrial and automotive coatings. For this purpose, we synthesized monodisperse colloids from fluorinated methacrylates by surfactant‐free emulsion polymerization. The fluorinated monomers, in combination with crosslinking, lead to a refractive index contrast, thermal stability, and solvent resistivity necessary for use as effect pigments. After crystallization of the monodisperse polymer beads, crystal flakes with iridescent colors can be obtained. The crystal flakes can act as effect pigments in various transparent industrial and automotive coatings. Due to photonic crystal behavior of effect pigments, color flops up to 100 nm are observed.

Crystal flakes of CS ‐7 as effect pigments in a transparent coating. The diameter of the tube is 5 mm.     

Preparation and Characterization of Organic/Inorganic Polymer Composites Based on Mg‐Silicates

Summary: An organic‐inorganic hybrid material consisting of a 3‐(methacryloxy)propyl functionalized SiO₂/MgO framework was synthesized. This hybrid was successfully reacted with styrene, butyl acrylate and butyl methacrylate via a free radical emulsion polymerization to form polymer composites. The polymer composites were investigated by means of FT‐IR spectroscopy, TGA, DSC and rheometry. It is shown that the polymer is linked covalently to the organic/inorganic hybrid. Although the polymer content is rather low, the composites exhibit a polymer‐like character and enhanced mechanical properties compared to the corresponding homopolymers.

     

Modeling of the Emulsion Terpolymerization of Styrene, α‐Methylstyrene and Methyl Methacrylate

Summary: This work deals with modeling the terpolymerization of styrene, α‐methylstyrene and methyl methacrylate in the presence of an inhibitor. The model used is a “tendency model” based on the kinetics of the complex elementary chemical reactions both in the aqueous phase and in the particles. It considers the reversible propagation of α‐methylstyrene and the main physical phenomena occurring during the process, i.e., (i) partitioning of monomers, surfactant and inhibitor between the aqueous phase, polymer particles, monomer droplets and micelles; (ii) homogeneous and micellar nucleation; (iii) radical absorption and desorption; (iv) gel and glass effects. The main kinetic parameters of the model are estimated on the basis of batch experimental data in order to be able to describe the complete picture of this complex process. The model can be used to predict (with good precision) the global monomer conversion, number and weight‐average molecular weight, the average diameter and number of polymer particles and the glass transition temperature, and consequently to study the effects of AMS on conversion and terpolymer and latex characteristics.

Comparison of experimental and simulated results of the weight‐average molecular weight versus conversion for the emulsion terpolymerization of styrene, alpha methylstyrene and methyl methacrylate at 60 °C.     

Morphology and Mechanical Properties in Polymer Blends of Photocurable Polymer and Polycarbonate

Relationships between the morphologies and mechanical properties of binary blends of a photocurable polymer (2‐propenoic acid, (octahydro‐4,7‐methano‐1H‐indenediyl) bis(methylene)ester; DCA) and a linear polymer (poly(4,4′‐cyclohexylidene bisphenol carbonate); PCz) have been investigated. The blend films are prepared by in situ photopolymerization of homogeneous mixtures of a DCA‐monomer and PCz. The phase structure has been converted from a semi‐interpenetrating polymer networks (semi‐IPN) structure to a bicontinuous structure by controlling the cure temperature. Bicontinuous phase‐separated structures can be obtained by curing a wide range of compositions of 17–50 wt.‐% PCz at high temperatures. Miscible semi‐IPN structures are attained by means of photopolymerization below the glass transition temperature of the homogenous mixture before performing photoirradiation, such that magnetic relaxation measurements showed the blend to be miscible in the 10 nm order. The tensile strength and modulus reached a maximum in those blends having an intermediate vague phase structure between semi‐IPN and bicontinuous structures that have a strong interfacial interaction, which leads to incomplete phase decomposition in the PCz‐rich matrix phase. The maximum strength and modulus prepared under optimum condition are inferior to those of the individual components. In contrast, the elongation and break energy are greatly improved in those blends with bicontinuous structures having a diffused phase boundary.

DCA‐rich domain size in bicontinuous structure for DCA/PCz system, as a function of cure temperature; (□) 17 wt.‐% PCz, (○) 30 wt.‐% PCz, and (?) 50 wt.‐% PCz.     

Novel Poly(N‐isopropylacrylamide)‐graft‐poly(vinylidene fluoride) Copolymers for Temperature‐Sensitive Microfiltration Membranes

In the present work, we report on the synthesis and characterization of poly(vinylidene fluoride) (PVDF) with N‐isopropylacrylamide (NIPAAM) polymer side chains from molecular graft copolymerization in solution. The copolymer can be readily cast into temperature‐sensitive microfiltration (MF) membranes by the phase inversion technique. The copolymer approach to membrane fabrication allows a much better control of the physicochemical nature of the membrane pores through the variation in graft concentration, membrane casting temperature and concentration of the membrane casting solution.

     

Effect of Compatibilizer Concentration on Rheological Behavior,Morphologies, and Mechanical Properties of PVDF/TPU Blends

The rheological behavior, morphologies, and tensile properties of reactively compatibilized PVDF/TPU blends are reported. Using PVDF‐g‐AAc as the compatibilizer, PVDF/TPU 90/10 and 10/90 blends are prepared. The carboxylic acid groups of PVDF‐g‐AAc react with the urethane linkages of TPU during melt blending to generate in situ PVDF‐g‐AAc‐g‐TPU which leads to compatibilization of PVDF/TPU blends. The introduction of PVDF‐g‐AAc into the PVDF/TPU blends causes an increase in viscosity. The rheological behavior of the compatibilized PVDF/TPU 90/10 and 10/90 blends are well described by the generalized Zener model. The addition of the compatibilizer PVDF‐g‐AAc reduces the dispersed‐phase domain size and narrows the size distribution. ?Author: The summary has been shortened to comply with the maximum of 700 characters. Pls check/confirm changes!?

     

External Stimuli‐Responsive Characteristics of Ionic Poly[(N,N‐diethylaminoethyl methacrylate)‐co‐(N‐vinyl‐2‐pyrrolidone)] Hydrogels

Summary: Polyelectrolyte hydrogels containing diprotic acid moieties sensitive to ionic strength changes of the swelling medium were synthesized from N,N‐diethylaminoethyl methacrylate (DEAEMA), N‐vinyl‐2‐pyrrolidone (VP) and itaconic acid (IA) by using ammonium persulfate (APS) as a free radical initiator in the presence of the cross‐linker, methylenebisacrylamide (MBAAm). The swelling behavior of the ionic poly[(N,N‐diethylaminoethyl methacrylate)‐co‐(N‐vinyl‐2‐pyrrolidone)] [P(DEAEMA/VP)] hydrogels were investigated in pure water; in NaCI solutions with pH 4 and 9; and in water‐acetone mixtures depending on the IA content in the hydrogel. The average molecular mass between cross‐links ( ) and polymer‐solvent interaction parameter (χ) of the hydrogels were determined from equilibrium swelling values. The pulsatile swelling behavior was also observed in response to solvent changes between the solution in water and in acetone. The equilibrium swelling ratio of these hydrogels was basically unaffected with change in temperature. The swelling variations were explained according to the swelling theory based on the hydrogel chemical structure.

Pulsatile swelling behavior of ionic P(DEAEMA/VP) hydrogels in response to solvent changes between water and acetone at 25 °C.     

Enhanced Stereocomplex Crystallization of Biodegradable Enantiomeric Poly(lactic acid)s by Repeated Casting

Stereocomplex crystallization between PLLA and PDLA is known to be disturbed when their molecular weights increase to >10⁵ g · mol^?1. Here, solution casting of PLLA and PDLA with different solvents was performed repeatedly to increase the time for the PLLA/PDLA solution in the concentration range in which only stereocomplex crystallites are formed and thus to elevate the stereocomplex crystallinity in the materials. The results of WAXS and DSC show that for all solvents examined the crystallinities of stereocomplex crystallites and homocrystallites increased and decreased, respectively, with increasing number of castings, indicating that repeated casting is a promising method to enhance stereocomplex crystallization.

     

Ternary Blends to Improve Heat Distortion Temperature and Rheological Properties of PVC

Summary: Binary and ternary blends of PVC mixed with α‐methylstyrene/acrylonitrile‐butadiene‐styrene copolymer (AMS‐ABS) and ethylene/vinyl acetate/carbon monoxide terpolymer (EVA‐CO) are investigated, with the aim to obtain a new PVC based material with an improved heat distortion temperature and good processability. Dynamic Mechanical Thermal Analysis (DMTA) reveals that ternary PVC/AMS‐ABS/EVA‐CO blends exhibit two glass transition temperatures: the lower T_g corresponds to a PVC/EVA‐CO phase and the higher one to a PVC/AMS‐ABS phase. An analysis of PVC respective interactions with AMS‐ABS and EVA‐CO leads to assert that the distribution of PVC in the ternary PVC/AMS‐ABS/EVA‐CO system is basically controlled by the binary immiscible blend composition, taken as Φ AMS‐ABS/Φ EVA‐CO ratio. The inclusion of AMS‐ABS and EVA‐CO to form ternary blends based on PVC, allows to improve heat distortion temperature (owed to the presence of AMS‐ABS), maintaining a low viscosity in the molten state, due to the plasticizing effect of EVA‐CO.

Viscosity function obtained at T = 170 °C from extrusion capillary measurements.