变时滞随机递归神经网络的全局指数稳定性

利用自由权值矩阵和不等式分析技巧,研究了一类随机变时滞神经网络的全局指数稳定性问题.该模型中考虑了神经网络的外部随机扰动因素,更加接近真实网络.通过构造适当的Lyapunov-Krasovskii泛函,以线性矩阵不等式形式给出了的全局指数稳定性判据,能够利用Matlab的LMI工具箱很容易地进行检验.此外,仿真结果进一步证明了结论的有效性.     

迭代二次规划遮挡点恢复

为了有效地的恢复遮挡点,本文提出一种迭代二次规划遮挡点恢复方法,该方法首先分别利用图像矩阵的行向量和列向量在图像矩阵生成的正交补空间上的投影为0的特性,构造行和列余差函数,同时,对遮挡点分别按行为主序和列为主序进行排列,利用排列后这两者之间存在一个变换关系,将行和列余差函数统一表示为一个二次优化目标函数.该方法同时考虑了遮挡点在行和列两个方向的约束,而且将遮挡点求解转化为迭代求解一个二次规划问题.实验结果表明,本文方法具有收敛速度快,恢复精度高等优点.     

细胞神经网络的全局指数稳定性

本文研究了细胞神经网络的全局指数稳定性问题,运用Lyapunov函数法和不等式的分析技巧给出了细胞神经网络全局指数稳定的三个判据。     

非线性系统神经网络L_2增益控制

针对很难求解HJ偏微分不等式解析解的问题,采取一种新的思想,给出了利用神经网络构造HJ不等式解的一种方法,并利用遗传算法进行神经网络权值的优化,使得Lyapunov函数满足HJ不等式,避免了求解HJ偏微分不等式.并在此基础上,给出基于HJ不等式的仿射非线性系统神经网络L2增益抗干扰控制器设计方法,以神经网络的形式给出L2增益控制器的一般结构.仿真结果表明,提出的控制器设计方法是可行的,实现了闭环系统为从外界干扰到系统输出是有限增益L2稳定的.     

约束非线性规划问题的L1精确罚函数神经网络方法

 优化计算是神经网络的一个重要应用领域.针对已有神经网络求解约束非线性规划问题时,不能兼顾网络规模、计算效率、精确性的问题,本文提出了一种基于精确罚函数的约束非线性规划问题的神经网络计算方法.将约束非线性规划问题的一种L₁精确罚函数作为神经网络的能量函数,利用该能量函数的最速下降原理构造了神经网络的动力学方程并给出了其稳定收敛性说明.理论分析及算例仿真表明,所提出神经网络动力学方程能够全局、精确收敛于原规划问题的一个局部最优解.特别是,该神经网络动力学方程易于映射为动态电路,是一种工程优化问题的实时计算方法.     

非线性几何规划的几种算法

介绍了非线性规划的数学模型(即具有不等式约束条件的求解目标函数最优化解的一类优化问题)以及现今求解这类非线性规划问题时,运用最为广泛的罚函数内点算法,同时介绍了解决几何规划问题的两种算法,内点路经跟踪法和序列二次规划法。通过实例,对比了文中所介绍的内点路径跟踪法和序列二次规划法的运算结果,最终给出结论。     

可靠性路径寻优的神经网络模型及电路计算

本文提出一种求解最可靠路径的神经网络新模型“ＳＭＲＲ”，证明考虑相关失效影响的电力系统可靠性路径寻优问题，可以表述为一个具有等式约束和不等式约束的二次规划问题，然后用文献（３）提出的二次规划电路模型来实现，该模型的特点是假设节点的失效具有相关性，且其计算可由硬件完成，仿真结果证明了该模型的稳定性和方法的可行性。     

不确定随机变时滞神经网络的全局渐进稳定性

采用It(o)'s微分公式和不等式分析技巧,研究了一类不确定随机变时滞神经网络的全局渐进稳定性问题.该模型同时考虑了神经网络模型的两种扰动因素,即随机扰动与不确定性扰动.不确定性参数是时变且范数有界的.通过构造适当的Lyapunov泛函,以线性矩阵不等式形式给出了平衡点在均方根意义下的全局渐进稳定性判据,能够利用LMI工具箱很容易地进行检验.此外,仿真示例证明了结论的有效性.     

基于Hopfield神经网络的盲均衡算法

基于Hopfield神经网络的盲均衡算法是把发送信号盲恢复问题转换为求解带整数约束的二次规划问题,再利用hopfield网络来求解这个NP难的组合优化问题,从而直接恢复出信号。Hopfield神经网络分为两种,一种是连续空间的hopfleld神经网络,一种是离散空间的hopfield网络,文章介绍怎样用这两种方法对含公零点信道上发送的信号进行准确地恢复,基于Hopfield神经网络的盲均衡算法收敛速度快,性能明显优于其它经典算法。     

具比例时滞杂交双向联想记忆神经网络的全局指数稳定性

对一类具比例时滞杂交双向联想记忆神经网络进行研究,利用Brouwer不动点定理证明该网络的平衡点的存在唯一性.利用变换将具比例时滞杂交双向联想记忆神经网络变换成等价的具不等常时滞与变系数杂交双向联想记忆神经网络.利用不等式技巧建立一拟Halanay型不等式系统,进而得到了确保该系统全局指数稳定的时滞独立的充分条件.并给出两个算例验证所得结论的正确性.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first     

JOURNAL OF ELECTRONICS(CHINA)

正~~     

NEXT GENERATION WIRELESS NETWORKS–ESPECIALLY THE USE OF MILLI-MICROWAVE BANDS

The global bandwidth shortage of wireless communications has motivated the exploration of the naillimeter wave （ram-wave） frequency spectrum for the next generation wireless communications. Recent advances in RF CMOS technology and high speed baseband signal processing technologies have enabled tile extensive research and development of turn-wave wireless communications. The multi gigabit per second data rate of ram-wave system will lead to applications in many important scenarios, such as WPAN, WLAN,back-haul for cellular system. And the frequency bands include 28 GHz, 38 GHz, 45GHz, 60GHz, E-BAND and even beyond 100 GHz. The propagation and the imitation of the RF circuits design in these frequency bands make the directional antennas be inevitable for mm-wave communications.