顶空固相微萃取-气相色谱-质谱法分离鉴定金华火腿的挥发性风味物质

采用顶空固相微萃取法(HS-SPME)制备样品,利用气相色谱-质谱法（GC-MS）分离鉴定了金华火腿的挥发性风味物质。实验中筛选了固相微萃取纤维头,优化了固相微萃取的操作条件。用75 μm碳分子筛/聚二甲基硅氧烷（CAR-PDMS）纤维头,于60 ℃下对金华火腿样品顶空吸附40 min,于250　℃下解吸2 min,采用GC-MS对解吸物进行分离鉴定。金华火腿样品的分析结果表明,其挥发性风味物质中含量较高的是醛、酸和酮类化合物,还有一些含硫或杂环化合物。     

顶空固相微萃取-气相色谱-质谱法快速测定酱油中的挥发性风味成分

建立了一种快速简便地测定酱油中挥发性风味成分的顶空固相微萃取（HS-SPME）-气相色谱-质谱法(GC-MS)。以2-辛醇为内标,考察了萃取头、萃取时间、离子强度、萃取温度对酱油样品中挥发性风味物质萃取的影响。该方法对酱油中常见挥发性风味成分的测定有良好的重复性和回收率,对常见挥发性物质的定量比较准确。优化的HS-SPME条件为：涂层厚度为85 μm聚丙烯酸酯(PA)萃取纤维头,于45 ℃、NaCl质量浓度为250 g/L下对酱油样品顶空吸附40 min,于250 ℃下解吸2 min后进行GC-MS分离鉴定。酱油样品的分析结果表明,其挥发性风味物质中含量较高的是醇、酸、酯和酚类,此外还有一些羰基化合物和杂环化合物。     

顶空固相微萃取-气相色谱法测定卷烟包装材料中残留溶剂

提出了顶空固相微萃取-气相色谱法测定卷烟包装材料中常用溶剂的方法。为使固相微萃取达到更高的效率,选用75μm CAR/PDMS的固相微萃取头,萃取温度及时间为100℃和40min,解吸温度及时间为200℃和10min。用DB-1石英毛细管色谱柱分离,火焰离子化检测器检测。方法的加标回收率在79%～92%之间,相对标准偏...     

顶空固相微萃取-气相色谱-质谱法用于白术中挥发性成分的分析

采用顶空固相微萃取-气相色谱-质谱法(HS-SPME-GC-MS)分离鉴定了白术中的挥发性成分,并与采用传统的水蒸气蒸馏法(SD)提取的挥发性成分进行了比较。实验中筛选了固相微萃取纤维头,优化了SPME的操作条件。样品在70 ℃下平衡30 min后,用65 μm聚二甲基硅氧烷-二乙烯基苯(PDMS-DVB)纤维头对白术样品顶空吸附30 min,于250 ℃下解吸4 min, 然后采用GC-MS对解吸物进行分离鉴定;采用HS-SPME-GC-MS鉴定出41种组分,占总峰面积的90.81%;采用SD-GC-MS鉴定出31个组分,占总峰面积的88.19%,且采用SD所提取的组分基本上都被固相微萃取所提取。结果表明, HS-SPME可取代耗时的SD用于白术中挥发性物质的提取。     

自制离子液体固相微萃取涂层分析人体尿液中的五氯酚

建立了顶空固相微萃取与气相色谱法（HS-SPME-GC）测定人体尿液中五氯酚（PCP）的新方法。 采用溶胶-凝胶法,加入自制的离子液体键合固相微萃取涂层,优化了萃取温度、萃取时间、pH值、离子强度及解吸时间。 结果表明,样品中加入3 g NaCl,溶液的pH值为2,并以一定速度搅拌的条件下,在80 ℃顶空萃取50 min,300 ℃下解吸5 min,方法的检测限为5.0 ng/L,线性范围为0.05～100 μg/L,相对标准偏差(RSD)为5.9%,加标回收率为106.6%。     

顶空固相微萃取-气相色谱-质谱联用分析干柴胡药材中有机挥发物

采用顶空固相微萃取与气相色谱-质谱联用技术检测分析干柴胡药材中挥发性成分,选用聚丙烯酸酯涂层,就萃取时间、温度、体积、样品量、预热时间及脱附时间等条件进行了优化,结果表明,30mL萃取瓶里0．5g样品90℃温度下预热40min后,以85μmPA涂层顶空萃取50min,于250℃脱附5min,测得88个峰,鉴定26种化合物成分。方法所得结果与传统提取方法(蒸馏提取法)比较,相对含量较高的成分一致,方法重现性理想,可应用于柴胡药材挥发性物质的快速分析。     

动态微波辅助顶空固相微萃取-气相色谱-质谱法测定芹菜叶中的化学成分

采用动态微波辅助顶空固相微萃取结合气相色谱-质谱法测定芹菜叶中的挥发性和半挥发性化学成分。对水蒸气蒸馏、顶空固相微萃取、微波辅助顶空固相微萃取、动态微波辅助顶空固相微萃取等4种不同的前处理方法进行了比较,通过气相色谱-质谱分析,分别鉴定出20,17,36,41种化学成分,主要化合物为α-月桂烯、柠檬烯、β-顺式罗勒烯、β-芹子烯和(Z)-3-己烯-1-醇等。结果表明:动态微波辅助顶空固相微萃取是一种简单、快速、易操作,无需净化步骤,消耗样品量少,对于沸点较高的半挥发性物质的萃取效果优于微波辅助顶空固相微萃取的方法,可用于分析各类植物中的挥发性和半挥发性化学成分。     

顶空-固相微萃取/气相色谱-质谱联用法分析“无锡毫茶”中的香气成分

建立了顶空-固相微萃取/气相色谱-质谱联用(HS-SPME/GC-MS)分析"无锡毫茶"香气的方法,并考察了固相微萃取头种类、萃取温度、预热时间、吸附时间、茶叶颗粒度、茶样量对HS-SPME吸附"无锡毫茶"香气物质种类和总量的影响。结果表明:采用过70目筛的茶样2.0 g在80℃下预热5 min后,插入碳分子筛/二乙烯基苯/聚二甲基硅氧烷(CAR/DVB/PDMS)固相微萃取头吸附40 min,能达到最佳吸附效果;将吸附的香气物质在GC-MS进样口内经250℃解吸3 min,共鉴定出53种"无锡毫茶"香气成分,其中以叶醇及其酯、芳樟醇及其氧化物、苯乙醇、香叶醇、橙花叔醇、金合欢烯、顺-茉莉酮、紫罗兰酮、吲哚、二甲硫醚等为主共同赋予了无锡毫茶清香而带有花果香的香气特征。     

顶空固相微萃取谱-气相色谱-质谱联用测定饮用水中6种致嗅化合物

采用顶空固相微萃取谱-气相色谱-质谱联用法对饮用水中2-甲基异茨醇、土味素、2-甲氧基-3-异丙基吡嗪、2-甲氧基-3-异丁基吡嗪、2,4,6-三氯苯甲醚和2,3,6-三氯苯甲醚共6种致嗅化合物进行了分析。通过对固相微萃取纤维的类型、解吸附时间、NaCl溶液浓度、溶液pH、顶空温度、转速、顶空时间等顶空条件及GC-MS条件的优化,建立了一次性顶空固相微萃取快速测定饮用水中6种致嗅化合物的方法。采用0.10 mol/L的NaOH溶液将水样调至pH 6.0。以DVB/Carboxen/PDMS涂层的固相微萃取纤维头对20 mL添加了NaCl溶液浓度为0.3 g/mL的水样于70℃水浴顶空萃取25 min。被萃取的致嗅化合物于250℃解吸附4 min供GC-MS分析。6种致嗅化合物在0.25～100 ng/L范围内线性关系良好(R>0.986),检出限低于0.1 ng/L。对实际水样进行分析,低、中、高3种不同浓度的加标回收率为93.0%～106.6%,相对标准偏差为3.0%～6.6%(n=6)。该分析方法可对饮用水中6种致嗅化合物进行同时监测。     

固相微萃取-气相色谱-质谱法测定饮用水源中53种挥发性有机污染物

应用固相微萃取-气相色谱-质谱法测定饮用水源中53种挥发性有机污染物的含量。优化的试验条件如下:1萃取纤维为DVB/CAR/PDMS;2萃取温度为25℃;3顶空体积为9mL;4萃取时间为10min;5解吸温度为200℃;6解吸时间为3min。在气相色谱分离中用VF-624MS柱为固定相,在质谱分析中采用全扫描模式。53种挥发性有机污染物在一定的质量浓度范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.001~0.130μg·L-1之间。方法用于实际水样的分析,加标回收率在75.9%~107%之间,测定值的相对标准偏差(n=5)在0.5%~18%之间。     

Fluordiazadiphosphetidine, 16. Mitt.

The reaction of (CH₃NPF₃)₂ with NH₃ and primary aliphatic and aromatic amines in the molar ratio 3:2 yields (CH₄NPF₄)₂ and the monoamino substituted fluordiaza-diphosphetidines. These react with N-Trimethylsilyl-methylamine to the mixed diamino substituted compounds.With 1,4-Diazabicyclo[2.2.2]octan as HF-acceptor a second step of nucleophilic substitution with NH₃ and primary amines is possible. In the case of ammonia a by- product has been identified as the 1:1 adduct of (CH₃NPF₂NH₂)₂ with 1,4-diazabicyclo[2.2.2]octan.

Herrn Prof. Dr.O. Hromatka zum 80. Geburtstag gewidmet.     

Fluordiazadiphosphetidine, 17. Mitt.

The reactions of (CH₃NPF₃)₂ and F₃P(CH₃N)₂PF₂OCH₃ with lithium-1,1,1-trimethyl-N-(trimethylsilyl)-silanamide yield two new dispiro-compounds:XF₂P(CH₃N)₂PF(NSiCH₃)₂PF(CH₃N)₂PF₂ X withX=F, OCH₃. Synthesis, mass-spectra and X-ray structures are discussed.

Herrn Prof. Dr.K. L. Komarek zum 60. Geburtstag gewidmet.     

毛细管区带电泳法分离白花丹参中主要的水溶性活性成分

为建立一种快速分离白花丹参水溶性有效成分的毛细管区带电泳体系,分别考察了缓冲液浓度、缓冲液pH、运行电压、检测波长对样品的分离度、迁移时间等因素的影响。最终优化的分离条件为:5 mmol/L硼砂缓冲液（pH 7.5）;毛细管柱75 μm×60.2 cm,有效长度50 cm,压力进样(3.45 kPa×4 s),27.5 kV恒压分离,210 nm波长下检测,柱温25 ℃。在优化的条件下,8 min内使白花丹参样品中的原儿茶醛、丹参素、原儿茶酸组分达到完全基线分离。     

Pseudoelementverbindungen. XI. [1] Untersuchungen zum Komplexbildungsverhalten von Cyanamidonitrat [NO2NCN]−

Pseudoelement Compounds. XI. [1] Investigations on the Coordination Behaviour of Cyanamidonitrate [NO₂NCN]^? With the ionic, potentially ambidentate ligand cyanamidonitrate complexes of the types [MX(PPh₃)₃], [MX(PPh₃)₂]₂ (M?Cu^I, Ag^I) and trans-[Pt(H)X(PPh₃)₂] (X^??[NO₂NCN]^?) are introduced. The new compounds are characterized by ¹H NMR, ³¹P NMR, and IR spectroscopy. The crystal structures of [Cu(NO₂NCN)(PPh₃)₂]₂ and [Ag(NO₂NCN)(PPh₃)₂]₂ are reported. In the complexes [MX(PPh₃)₃] and trans-[Pt(H)X(PPh₃)₂] cyanamidonitrate is unidentately coordinated through the nitrile group end-on. In the dimeric complexes [MX(PPh₃)₂]₂ the anion acts bidentately as a bridging ligand. Surprisingly, both coordinative bonds are formed through nitrogen atoms of the NCN group.     

Grafting onto Wool. IX. Graft Copolymerization of Vinyl Monomers by Use of Vanadium Oxyacetylacetonate as Initiator

Methyl methacrylate (MMA), acrylic acid (AAc), and vinyl acetate (VAc) were graft copolymerized onto Himachali wool in an aqueous medium by using vanadium oxyacetyl acetonate as initiator. Graft copolymerization was studied at 45, 55, 65, and 75°C for various reaction periods. The percentage of grafting was determined as functions of concentration of monomers, concentration of initiator, time, and temperature. The maximum percentage of grafting with each monomer occurred at 55°. Several grafting experiments were carried out in the presence of various additives which include HNO3, DMSO, and pyridine. Nitric acid was found to promote grafting of MMA. All these additives had adverse effects on grafting of VAc and AAc. MMA, VAc, and AAc were found to differ in reactivity toward grafting and followed the order MMA > AAc > VAc.     

Beiträge zur Chemie des Phosphors. 235. Zur Darstellung größerer Mengen von Diphosphan(4) im Laboratorium

Contributions to the Chemistry of Phosphorus. 235. On the Preparation of Larger Amounts of Diphosphane(4) in the Laboratory The preparation of several hundred grammes of diphosphane(4) by hydrolysis of calcium phosphide in a semicontinuous process as well as the handling of larger amounts of this compound are reported. In comparison with earlier results [12], the yield has been raised by 37 percent with simultaneous increase of the accessible total amount. The white solid which is formed in the preparation and purification of diphosphane(4) is not, as was believed in earlier work [25, 8], triphosphane(5) or another, novel phosphorus hydride but is rather a clathrate compound of diphosphane(4) or the phosphanes P_nH_n+2 (n = 2–4) and water, respectively.     

Unrestricted CNDO-MO calculations. II. MnO 4 2− and CrO 4 3−

The electronic structures of the tetrahedral molecule ions MnO ₄ ^2– and CrO ₄ ^3– have been investigated within an unrestricted CNDO-MO approximation [Theoret. Chim. Acta (Berl.)20, 317 (1971)]. Calculations assuming the unpaired electron occupies the 3a ₁, 2e, and 4t2 molecular orbitals indicate that the 3a ₁ and2e orbitals have similar orbital energies and that the 4t ₂ orbital is at a higher energy. The experimentally indicated2e orbital for the unpaired electron is obtained with expanded O^1– type atomic orbitals for oxygen and valence metal orbitals of the expanded 3d and plus one ion 4p types. The metal 4s orbitals must be held to the neutral atom type. The optimum valence orbitals above with a slightly contracted 4s type metal orbitals yield the minimum total energy and places the unpaired electron in the 3a ₁ orbital. Since the contracted 4s metal orbital produces results that are not in agreement with experimental data, the method used apparently does not adequately take into account the increased electron-electron repulsions that contracted 4s orbitals produce.     

Fluordiazadiphosphetidine. 8. Mitt. Die photochemische chlorierung von 2,2,2,4,4,4-Hexafluoro-1,3-dimethyl-1,3,2λ5,4λ5-diazadiphosphetidin

Chlorination of (CH₃NPF₃)₂ with Chlorine under UV-radiation yields the new compounds CH₃(NPF₃)₂CH₂Cl and (ClCH₂NPF₃)₂.

     

Minimizing UV noise in supercritical fluid chromatography. I. Improving back pressure regulator pressure noise

Pressure fluctuations and resulting refractive index changes, induced by the back pressure regulator (BPR) can be a significant source of UV detector noise in supercritical fluid chromatography (SFC). The refractive index (RI) of pure carbon dioxide (CO(2)) changes ≈0.2%/bar at the most commonly used conditions in supercritical fluid chromatography (SFC) (40 °C and 100 bar), compared to 0.0045%/bar for water (CO(2) IS 44× worse). Changes in RI cause changes in the focal length of the detector cell which results in changes in UV intensity entering the detector. The change in RI (ΔRI/bar) of CO(2) decreases 8-fold at 200 bar, compared to 100 bar. A new back pressure regulator (BPR) design representing an order of magnitude improvement in the state of the art is shown to produce peak to peak pressure noise (PN(p-p)) as low as 0.1 bar, at 200 bar, and 20Hz, compared to older equipment that attempted to maintain PN(p-p)<1bar, at <5Hz. With this lower PN(p-p), changes in baseline UV offsets could be measured as a function of very small changes in pressure. A pressure change of ±1 bar at 100 bar, common with some older BPR's, produced a UV baseline offset >0.5 mAU. A pressure change of ±0.5 bar representing the previous state-of-the-art, resulted in a UV offset of 0.3m AU. Baseline noise <0.05 is required to validate methods for trace analysis. The new BPR, with a PN(p-p) of 0.1 bar, demonstrated UV peak to peak noise (N(p-p))<0.02 mAU with a >0.03 min (10Hz) electronic filter under some conditions. This new low noise level makes it possible to validate SFC methods for the first time.