Time‐specific and pleiotropic quantitative trait loci coordinately modulate stem growth in Populus

In perennial woody plants, the coordinated increase of stem height and diameter during juvenile growth improves competitiveness (i.e. access to light); however, the factors underlying variation in stem growth remain unknown in trees. Here, we used linkage‐linkage disequilibrium (linkage‐LD) mapping to decipher the genetic architecture underlying three growth traits during juvenile stem growth. We used two Populus populations: a linkage mapping population comprising a full‐sib family of 1,200 progeny and an association mapping panel comprising 435 unrelated individuals from nearly the entire natural range of Populus tomentosa. We mapped 311 quantitative trait loci (QTL) for three growth traits at 12 timepoints to 42 regions in 17 linkage groups. Of these, 28 regions encompassing 233 QTL were annotated as 27 segmental homology regions (SHRs). Using SNPs identified by whole‐genome re‐sequencing of the 435‐member association mapping panel, we identified significant SNPs (P ≤ 9.4 × 10^?7) within 27 SHRs that affect stem growth at nine timepoints with diverse additive and dominance patterns, and these SNPs exhibited complex allelic epistasis over the juvenile growth period. Nineteen genes linked to potential causative alleles that have time‐specific or pleiotropic effects, and mostly overlapped with significant signatures of selection within SHRs between climatic regions represented by the association mapping panel. Five genes with potential time‐specific effects showed species‐specific temporal expression profiles during the juvenile stages of stem growth in five representative Populus species. Our observations revealed the importance of considering temporal genetic basis of complex traits, which will facilitate the molecular design of tree ideotypes.     

Quantitative trait loci for magnitude of the plasma cortisol response to confinement in rainbow trout

Better understanding of the mechanisms underlying interindividual variation in stress responses and their links with production traits is a key issue for sustainable animal breeding. In this study, we searched for quantitative trait loci (QTL) controlling the magnitude of the plasma cortisol stress response and compared them to body size traits in five F2 full‐sib families issued from two rainbow trout lines divergently selected for high or low post‐confinement plasma cortisol level. Approximately 1000 F2 individuals were individually tagged and exposed to two successive acute confinement challenges (1 month interval). Post‐stress plasma cortisol concentrations were determined for each fish. A medium density genome scan was carried out (268 markers, overall marker spacing less than 10 cM). QTL detection was performed using qtlmap software, based on an interval mapping method ( http://www.inra.fr/qtlmap ). Overall, QTL of medium individual effects on cortisol responsiveness (<10% of phenotypic variance) were detected on 18 chromosomes, strongly supporting the hypothesis that control of the trait is polygenic. Although a core array of QTL controlled cortisol concentrations at both challenges, several QTL seemed challenge specific, suggesting that responses to the first and to a subsequent exposure to the confinement stressor are distinct traits sharing only part of their genetic control. Chromosomal location of the steroidogenic acute regulatory protein (STAR) makes it a good potential candidate gene for one of the QTL. Finally, comparison of body size traits QTL (weight, length and body conformation) with cortisol‐associated QTL did not support evidence for negative genetic relationships between the two types of traits.     

More than one way to evolve a weed: parallel evolution of US weedy rice through independent genetic mechanisms

Many different crop species were selected for a common suite of ‘domestication traits’, which facilitates their use for studies of parallel evolution. Within domesticated rice (Oryza sativa), there has also been independent evolution of weedy strains from different cultivated varieties. This makes it possible to examine the genetic basis of parallel weed evolution and the extent to which this process occurs through shared genetic mechanisms. We performed comparative QTL mapping of weediness traits using two recombinant inbred line populations derived from crosses between an indica crop variety and representatives of each of the two independently evolved weed strains found in US rice fields, strawhull (S) and blackhull awned (B). Genotyping‐by‐sequencing provided dense marker coverage for linkage map construction (average marker interval <0.25 cM), with 6016 and 13 730 SNPs mapped in F₅ lines of the S and B populations, respectively. For some weediness traits (awn length, hull pigmentation and pericarp pigmentation), QTL mapping and sequencing of underlying candidate genes confirmed that trait variation was largely attributable to individual loci. However, for more complex quantitative traits (including heading date, panicle length and seed shattering), we found multiple QTL, with little evidence of shared genetic bases between the S and B populations or across previous studies of weedy rice. Candidate gene sequencing revealed causal genetic bases for 8 of 27 total mapped QTL. Together these findings suggest that despite the genetic bottleneck that occurred during rice domestication, there is ample genetic variation in this crop to allow agricultural weed evolution through multiple genetic mechanisms.     

Genotypic variation in transpiration of coppiced poplar during the third rotation of a short‐rotation bio‐energy culture

The productivity of short‐rotation coppice (SRC) plantations with poplar (Populus spp.) strongly depends on soil water availability, which limits the future development of its cultivation, and makes the study of the transpirational water loss particularly timely under the ongoing climate change (more frequent drought and floods). This study assesses the transpiration at different scales (leaf, tree and stand) of four poplar genotypes belonging to different species and from a different genetic background grown under an SRC regime. Measurements were performed for an entire growing season during the third year of the third rotation in a commercial scale multigenotype SRC plantation in Flanders (Belgium). Measurements at leaf level were performed on specific days with a contrasted evaporative demand, temperature and incoming shortwave radiation and included stomatal conductance, stem and leaf water potential. Leaf transpiration and leaf hydraulic conductance were obtained from these measurements. To determine the transpiration at the tree level, single‐stem sap flow using the stem heat balance (SHB) method and daily stem diameter variations were measured during the entire growing season. Sap flow‐based canopy transpiration (E_c), seasonal dry biomass yield, and water use efficiency (WUE; g aboveground dry matter/kg water transpired) of the four poplar genotypes were also calculated. The genotypes had contrasting physiological responses to environmental drivers and to soil conditions. Sap flow was tightly linked to the phenological stage of the trees and to the environmental variables (photosynthetically active radiation and vapor pressure deficit). The total E_c for the 2016 growing season was of 334, 350, 483 and 618 mm for the four poplar genotypes, Bakan, Koster, Oudenberg and Grimminge, respectively. The differences in physiological traits and in transpiration of the four genotypes resulted in different responses of WUE.     

QTL for yield in bioenergy Populus: identifying G×E interactions from growth at three contrasting sites

Populus is a genus of fast growing trees that may be suitable as a bioenergy crop grown in short rotation, but understanding the genetic nature of yield and genotype interactions with the environment is critical in developing new high-yield genotypes for wide-scale planting. In the present study, 210 genotypes from an F₂ population (Family 331; POP1) derived from a cross between Populus trichocarpa 93-968 and P. deltoides ILL-129 were grown in southern UK, central France and northern Italy. The performance of POP1, based upon first- and second-year main stem traits and biomass production, improved from northern to southern Europe. Trees at the Italian site produced the highest mean biomass ranging from 0.77 to 18.06 oven-dried tonnes (ODT) ha⁻¹ year⁻¹, and the UK site produced the lowest mean biomass ranging from 0.18 to 10.31 ODT ha⁻¹ year⁻¹. Significant genotype × environment interactions were seen despite heritability values across sites being moderate to high. Using a pseudo-testcross analysis, 37 quantitative trait loci (QTL) were identified for the maternal parent and 45 for the paternal parent for eight stem and biomass traits across the three sites. High genetic correlations between traits suggested that collocating QTL could be inferred as a single pleiotropic QTL, reducing the number of unique QTL to 23 and 24 for the maternal and paternal parent, respectively. Additive genetic effects were seen to differ significantly for eight QTL on the maternal map and 20 on the paternal map across sites. An additive main effects and multiplicative interaction analysis was carried out to obtain stability parameters for each trait. These parameters were mapped as QTL, and collocation to trait QTL was accessed. Two of the eight stability QTL collocate to trait QTL on the maternal map, and 8 of the 20 stability QTL collocate to trait QTL on the paternal map, suggesting that a regulatory gene model is prevalent over an allele sensitivity model for stem trait stability across these environments.     

A multiparental cross population for mapping QTL for agronomic traits in durum wheat (Triticum turgidum ssp. durum)

Multiparental cross designs for mapping quantitative trait loci (QTL) provide an efficient alternative to biparental populations because of their broader genetic basis and potentially higher mapping resolution. We describe the development and deployment of a recombinant inbred line (RIL) population in durum wheat (Triticum turgidum ssp. durum) obtained by crossing four elite cultivars. A linkage map spanning 2664 cM and including 7594 single nucleotide polymorphisms (SNPs) was produced by genotyping 338 RILs. QTL analysis was carried out by both interval mapping on founder haplotype probabilities and SNP bi‐allelic tests for heading date and maturity date, plant height and grain yield from four field experiments. Sixteen QTL were identified across environments and detection methods, including two yield QTL on chromosomes 2BL and 7AS, with the former mapped independently from the photoperiod response gene Ppd‐B1, while the latter overlapped with the vernalization locus VRN‐A3. Additionally, 21 QTL with environment‐specific effects were found. Our results indicated a prevalence of environment‐specific QTL with relatively small effect on the control of grain yield. For all traits, functionally different QTL alleles in terms of direction and size of genetic effect were distributed among parents. We showed that QTL results based on founder haplotypes closely matched functional alleles at known heading date loci. Despite the four founders, only 2.1 different functional haplotypes were estimated per QTL, on average. This durum wheat population provides a mapping resource for detailed genetic dissection of agronomic traits in an elite background typical of breeding programmes.     

A two‐step approach to map quantitative trait loci for meat quality in connected porcine F2 crosses considering main and epistatic effects

The aim of this study was to map QTL for meat quality traits in three connected porcine F₂ crosses comprising around 1000 individuals. The three crosses were derived from the founder breeds Chinese Meishan, European Wild Boar and Pietrain. The animals were genotyped genomewide for approximately 250 genetic markers, mostly microsatellites. They were phenotyped for seven meat quality traits (pH at 45 min and 24 h after slaughter, conductivity at 45 min and 24 h after slaughter, meat colour, drip loss and rigour). QTL mapping was conducted using a two‐step procedure. In the first step, the QTL were mapped using a multi‐QTL multi‐allele model that was tailored to analyse multiple connected F₂ crosses. It considered additive, dominance and imprinting effects. The major gene RYR1:g.1843C>T affecting the meat quality on SSC6 was included as a cofactor in the model. The mapped QTL were tested for pairwise epistatic effects in the second step. All possible epistatic effects between additive, dominant and imprinting effects were considered, leading to nine orthogonal forms of epistasis. Numerous QTL were found. The most interesting chromosome was SSC6. Not all genetic variance of meat quality was explained by RYR1:g.1843C>T. A small confidence interval was obtained, which facilitated the identification of candidate genes underlying the QTL. Epistasis was significant for the pairwise QTL on SSC12 and SSC14 for pH24 and for the QTL on SSC2 and SSC5 for rigour. Some evidence for additional pairwise epistatic effects was found, although not significant. Imprinting was involved in epistasis.     

Selection on QTL and complex traits in complex environments

Understanding genetic variation for complex traits in heterogeneous environments is a fundamental problem in biology. In this issue of Molecular Ecology, Fournier‐Level et al. ( 2013 ) analyse quantitative trait loci (QTL) influencing ecologically important phenotypes in mapping populations of Arabidopsis thaliana grown in four habitats across its native European range. They used causal modelling to quantify the selective consequences of life history and morphological traits and QTL on components of fitness. They found phenology QTL colocalizing with known flowering time genes as well as novel loci. Most QTL influenced fitness via life history and size traits, rather than QTL having direct effects on fitness. Comparison of phenotypes among environments found no evidence for genetic trade‐offs for phenology or growth traits, but genetic trade‐offs for fitness resulted because flowering time had opposite fitness effects in different environments. These changes in QTL effects and selective consequences may maintain genetic variation among populations.     

Mapping QTL for production traits in segregating Piétrain pig populations using genome‐wide association study results of F2 crosses

In this study, genome‐wide association study (GWAS) results of porcine F2 crosses were used to map QTL in outcross Piétrain populations. For this purpose, two F2 crosses (Piétrain × Meishan, n = 304; Piétrain × Wild Boar, n = 291) were genotyped with the PorcineSNP60v2 BeadChip and phenotyped for the dressing yield, carcass length, daily gain and drip loss traits. GWASs were conducted in the pooled F2 cross applying single marker mixed linear models. For the investigated traits, between two and five (in total 15) QTL core regions, spanning 250 segregating SNPs around a significant trait‐associated peak SNP, were identified. The SNPs within the QTL core regions were subsequently tested for trait association in two outcross Piétrain populations consisting of 771 progeny‐tested boars and 210 sows with their own performance records. In the sow (boar) dataset, five (eight) of the 15 mapped QTL were validated. Hence, many QTL mapped in the F2 crosses (with Piétrain as a common founder breed) are still segregating in the current Piétrain breed. This confirms the usefulness of existing F2 crosses for mapping QTL that are still segregating in the recent founder breed generation. The approach utilizes the high power of an F2 cross to map QTL in a breeding population for which it is not guaranteed that they would be found using a GWAS in this population.     

High‐density linkage map reveals QTL underlying growth traits in AP13×VS16 biparental population of switchgrass

Switchgrass (Panicum virgatum L.), a native warm‐season perennial grass, is being considered as a feedstock for biofuel production in the United States. To expedite its genetic improvement and enhance genetic gain per selection cycle, application of marker‐assisted selection is indispensable. A high‐density linkage map was constructed in a pseudo‐F₁ testcross mapping population of AP13×VS16, consisting of 349 progenies. A total of 8,757 single nucleotide polymorphism (SNP) markers generated through genotype‐by‐sequencing (GBS) were used to construct the linkage map. The total map length spans up to 2,540.2 cM with the marker density of one marker in every 0.25–0.34 cM. Spring green‐up (SG), days to flowering (FL), and the vegetative growth period (VP) data were analyzed and used for quantitative trait loci (QTL) mapping. The population showed significant variations and exhibited transgressive segregation for SG, FL, and VP. QTL analyses were performed using trait mean of each year and location along with BLUP (best linear unbiased prediction) values of the traits. A total of 35, 37, and 34 QTL for SG, FL, and VP, respectively, were identified. Phenotypic variability explained by each QTL ranged from 11.29% to 27.85%. The additive genetic effects of individual QTL ranged from ?1.81 to 2.40, ?6.12 to 7.58, and ?16.01 to 6.38 for SG, FL, and VP, respectively. Comparing major QTL regions in the switchgrass genome, 20 candidate genes were identified which were reported to be involved in growth‐, development‐, and flowering‐related traits in switchgrass.     

Analysis of the genetic architecture of maize kernel size traits by combined linkage and association mapping

Kernel size‐related traits are the most direct traits correlating with grain yield. The genetic basis of three kernel traits of maize, kernel length (KL), kernel width (KW) and kernel thickness (KT), was investigated in an association panel and a biparental population. A total of 21 single nucleotide polymorphisms (SNPs) were detected to be most significantly (P < 2.25 × 10^?6) associated with these three traits in the association panel under four environments. Furthermore, 50 quantitative trait loci (QTL) controlling these traits were detected in seven environments in the intermated B73 × Mo17 (IBM) Syn10 doubled haploid (DH) population, of which eight were repetitively identified in at least three environments. Combining the two mapping populations revealed that 56 SNPs (P < 1 × 10^?3) fell within 18 of the QTL confidence intervals. According to the top significant SNPs, stable‐effect SNPs and the co‐localized SNPs by association analysis and linkage mapping, a total of 73 candidate genes were identified, regulating seed development. Additionally, seven miRNAs were found to situate within the linkage disequilibrium (LD) regions of the co‐localized SNPs, of which zma‐miR164e was demonstrated to cleave the mRNAs of Arabidopsis CUC1, CUC2 and NAC6 in vitro. Overexpression of zma‐miR164e resulted in the down‐regulation of these genes above and the failure of seed formation in Arabidopsis pods, with the increased branch number. These findings provide insights into the mechanism of seed development and the improvement of molecular marker‐assisted selection (MAS) for high‐yield breeding in maize.     

Study of tree architecture of apple (<Emphasis Type="Italic">Malus</Emphasis> × <Emphasis Type="Italic">domestica</Emphasis> Borkh.) by QTL analysis of growth traits

Apple tree architecture is naturally very diverse, but for fruit production, certain tree habits are more desirable than others. Here we describe the results of a QTL analysis performed to study the genetic control of growth traits in apple. This was carried out on the progeny of a cross between two apple cultivars of contrasting tree architectures. “Telamon” has a columnar tree form and “Braeburn” has a more standard, “normal” growth habit. The growth traits were measured on the F ₁ seedlings of the Telamon × Braeburn population for two consecutive years of growth on own roots and for the first year of growth on M9 rootstock. QTL analysis was carried out using either the Kruskal–Wallis method or the Multiple QTL Method. For all but one growth characteristic, significant QTLs were detected. A major cluster of QTLs was located in the Co gene region of “Telamon”, confirming the major influence of the Co gene on tree architecture, although this influence changed as the plant material aged and was generally more pronounced for rootstock-grown plants. Additional QTL results suggest the occurrence of genes with pleiotropic effects on tree architecture. The observed QTL instability over different years and for different root systems indicates that the genetic control of tree architecture is largely influenced by environmental factors and probably changes as the tree matures. Finally, a major influence of the root system on all the traits determining tree architecture was clearly demonstrated.     

The role of remnant trees in carbon sequestration,vegetation structure and tree diversity of early succession regrowing fallows in eastern Sierra Leone

Remnant tree presence affects forest recovery after slash‐and‐burn agriculture. However, little is known about its effect on above‐ground carbon stocks, especially in Africa. We focused our study on Sierra Leone, part of the Upper Guinean forests, an important centre of endemism threatened by encroachment and forest degradation. We studied 99 (20‐m‐radius) plots aged 2–10 years with and without remnant trees and compared their above‐ground carbon stocks, vegetation structure (stem density, basal area) and tree diversity. Above‐ground carbon stocks, stem density, basal area, species richness and tree diversity increased significantly with fallow age. Remnant tree presence affected significantly tree diversity, species dominance and above‐ground carbon stocks, but not vegetation structure (stem density, basal area). Number of remnant trees and number of species of remnant trees were also important explanatory variables. Although other factors should be considered in future studies, such as the size and dispersal modes of remnant trees, our results highlight that more strategic inclusion of remnant trees is likely to favour carbon stock and forest recovery in old fallows. To our knowledge, this is the first study on early succession regrowing fallows in West Africa.     

Independent genetic control of drought resistance,recovery, and growth of Eucalyptus globulus seedlings

Drought is a major stress impacting forest ecosystems worldwide. We utilized quantitative trait loci (QTL) analysis to study the genetic basis of variation in (a) drought resistance and recovery and (b) candidate traits that may be associated with this variation in the forest tree Eucalyptus globulus. QTL analysis was performed using a large outcrossed F₂ mapping population from which 300 trees were phenotyped based on the mean performance of their open-pollinated F₃ progeny. Progenies were grown in a glasshouse in a randomized complete block design. A subset of seedlings was subjected to a drought treatment after which they were rewatered and scored for damage and growth postdrought. Nondroughted seedlings were assessed for growth traits as well as lignotuber size and resprouting following severe damage to the main stem. QTL were detected for most traits. Importantly, independent QTL were detected for (a) drought damage and plant size, (b) drought damage and growth recovery, and (c) lignotuber size and resprouting capacity. Such independence argues that trade-offs are unlikely to be a major limitation to the response to selection and at the early life history stage studied; there are opportunities to improve resilience to drought without adverse effects on productivity.     

Ecological genetics of sediment browsing behaviour in a planktonic crustacean

Zooplankton can display complex habitat selection behaviours that influence the way they interact with their environments. Some species, although primarily pelagic, can exploit sediment‐borne particles as a food source or use sediments as a refuge from pelagic predation. However, this strategy may increase the exposure to other risks such as benthic predation and infection from sediment‐borne parasite transmission stages. The evolution of habitat selection behaviour in these species is thus expected to be influenced by multiple and possibly contrasting selective forces. Here, we study the browsing behaviour of the water flea Daphnia magna on bottom sediments. First, we demonstrated genetic variation for sediment browsing among D. magna genotypes from natural populations sampled across a broad geographic range. Next, we used an F2 recombinant panel to perform a QTL analysis and identified three regions in the D. magna genome contributing to variation in browsing behaviour. We also analysed the correlation between our data and previously published data on the phototactic behaviour of genotypes from the same F2 panel. Clonal means of the two behavioral traits were not correlated, suggesting that they may evolve independently. Browsing behaviour is likely to be a relevant component of habitat selection in D. magna, and its study may help to incorporate the interactions with the sediment into eco‐evolutionary models of this key freshwater species.     

Genomic architecture of habitat‐related divergence and signature of directional selection in the body shapes of Gnathopogon fishes

Evolution of ecomorphologically relevant traits such as body shapes is important to colonize and persist in a novel environment. Habitat‐related adaptive divergence of these traits is therefore common among animals. We studied the genomic architecture of habitat‐related divergence in the body shape of Gnathopogon fishes, a novel example of lake–stream ecomorphological divergence, and tested for the action of directional selection on body shape differentiation. Compared to stream‐dwelling Gnathopogon elongatus, the sister species Gnathopogon caerulescens, exclusively inhabiting a large ancient lake, had an elongated body, increased proportion of the caudal region and small head, which would be advantageous in the limnetic environment. Using an F₂ interspecific cross between the two Gnathopogon species (195 individuals), quantitative trait locus (QTL) analysis with geometric morphometric quantification of body shape and restriction‐site associated DNA sequencing‐derived markers (1622 loci) identified 26 significant QTLs associated with the interspecific differences of body shape‐related traits. These QTLs had small to moderate effects, supporting polygenic inheritance of the body shape‐related traits. Each QTL was mostly located on different genomic regions, while colocalized QTLs were detected for some ecomorphologically relevant traits that are proxy of body and caudal peduncle depths, suggesting different degree of modularity among traits. The directions of the body shape QTLs were mostly consistent with the interspecific difference, and QTL sign test suggested a genetic signature of directional selection in the body shape divergence. Thus, we successfully elucidated the genomic architecture underlying the adaptive changes of the quantitative and complex morphological trait in a novel system.     

Insights into the genetic architecture of sexual dimorphism from an interspecific cross between two diverging Silene (Caryophyllaceae) species

The evolution of sexual dimorphism in species with separate sexes is influenced by the resolution of sexual conflicts creating sex differences through genetic linkage or sex‐biased expression. Plants with different degrees of sexual dimorphism are thus ideal to study the genetic basis of sexual dimorphism. In this study we explore the genetic architecture of sexual dimorphism between Silene latifolia and Silene dioica. These species have chromosomal sex determination and differ in the extent of sexual dimorphism. To test whether QTL for sexually dimorphic traits have accumulated on the sex chromosomes and to quantify their contribution to species differences, we create a linkage map and performed QTL analysis of life history, flower and vegetative traits using an unidirectional interspecific F2 hybrid cross. We found support for an accumulation of QTL on the sex chromosomes and that sex differences explained a large proportion of the variance between species, suggesting that both natural and sexual selection contributed to species divergence. Sexually dimorphic traits that also differed between species displayed transgressive segregation. We observed a reversal in sexual dimorphism in the F2 population, where males tended to be larger than females, indicating that sexual dimorphism is constrained within populations but not in recombinant hybrids. This study contributes to the understanding of the genetic basis of sexual dimorphism and its evolution in Silene.     

Genome‐wide association study for semen traits of the bulls in Chinese Holstein

A genome‐wide association study (GWAS) was performed to identify markers and candidate genes for five semen traits in the Holstein bull population in China. The analyzed dataset consisted of records from 692 bulls from eight bull stations; each bull was genotyped using the Illumina BovineSNP50 BeadChip. Association tests between each trait and the 41 188 informative high‐quality SNPs were achieved with gapit software. In total, 19 suggestive significant SNPs, partly located within the reported QTL regions or within or close to the reported candidate genes, associated with five semen traits were detected. By combining our GWAS results with the biological functions of these genes, eight novel promising candidate genes, including ETNK1, PDE3A, PDGFRB, CSF1R, WT1, DSCAML1, SOD1 and RUNX2, were identified that potentially relate to semen traits. Our findings may provide a basis for further research on the genetic mechanism of semen traits and marker‐assisted selection of such traits in Holstein bulls.     

Genetic mapping of biomass yield in three interconnected Miscanthus populations

Improving biomass yield is a major goal of Miscanthus breeding. We conducted a study on one interspecific Miscanthus sinensis × Miscanthus sacchariflorus F₁ population and two intraspecific M. sinensis F₁ populations, each of which shared a common parent. A field trial was established at Urbana, IL during spring 2011, and phenotypic data were collected in 2012 and 2013 for fourteen yield traits. Six high‐density parental genetic maps, as well as a consensus genetic map integrating M. sinensis and M. sacchariflorus, were developed via the pseudotestcross strategy for noninbred parents with ≥1214 single‐nucleotide polymorphism markers generated from restriction site‐associated DNA sequencing. We confirmed for the first time a whole‐genome duplication in M. sacchariflorus relative to Sorghum bicolor, similar to that observed previously for M. sinensis. Four quantitative trait locus (QTL) analysis methods for detecting marker‐trait associations were compared: (1) individual parental map composite interval mapping analysis, (2) individual parental map stepwise analysis, (3) consensus map single‐population stepwise analysis and (4) consensus map joint‐population stepwise analysis. These four methods detected 288, 264, 133 and 109 total QTLs, which resolved into 157, 136, 106 and 86 meta‐QTLs based on QTL congruency, respectively, including a set of 59 meta‐QTLs common to all four analysis methods. Composite interval mapping and stepwise analysis co‐identified 118 meta‐QTLs across six parental maps, suggesting high reliability of stepwise regression in QTL detection. Joint‐population stepwise analysis yielded the highest resolution of QTLs compared to the other three methods across all meta‐QTLs. Strong, frequently advantageous transgressive segregation in the three populations indicated a promising future for breeding new higher‐yielding cultivars of Miscanthus.