Polyether‐amide segmented copolymers based on ethylene terephthalamide units of uniform length

Segmented copolymers were synthesized using the crystallizable bisesterdiamide segment (N,N′‐bis(p‐carbomethoxybenzoyl)ethanediamine) T2T‐dimethyl (a one‐and‐a‐half repeating unit of nylon 2,T) and poly(tetramethyleneoxide) segments. Poly(tetramethyleneoxide) (PTMO) is amorphous and has a low T_g. The segment length was varied from 650 to 2800 g/mol by extending PTMO₆₅₀ using dimethyl isophthalate. The polymers were synthesized in the melt, and test samples were prepared by injection molding. The melting behavior, as well as the torsion modulus spectrum as a function of temperature, were studied using DSC and DMA, respectively. The T2T‐PTMO polymers were found to have sharp glass (T_g) and flow transitions (T_fl), and the modulus at the rubbery plateau appeared to be virtually temperature independent. The T_g value was found to be independent of the diamide concentration, thus indicating that the T2T segments were fully crystallized. The T_fl was found to decrease with increasing soft segment length; this was ascribed to a “solvent” effect of the amorphous phase of the crystalline T2T units. The difference between the melting and crystallization temperatures was found to be low, thus suggesting that on cooling, there is a high rate of crystallization. When ethanediol was added as a T2T segment extender, amide‐ester‐amide segments were introduced. These amide‐ester‐amide segments form a separate lamellar phase with a much higher melting temperature (>300°C). It was found that the crystallization rate of the T2T units was enhanced by the presence of the amide‐ester‐amide segments, indicating that upon cooling, the crystallized amide‐ester‐amide segments form the nucleation sites for the nonextended T2T segments. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1173–1180, 2001     

Fusion bonding of supercooled poly(ethylene terephthalate) between Tg and Tm

Because of its slowly crystallizing nature, poly(ethylene terephthalate) (PET) can be supercooled into an amorphous glass by rapid quenching. Upon reheating between T_g and T_m, the amorphous PET are subjected to two competing processes: rubber softening and crystallization. Fusion bonding of two such crystallizable amorphous polymer sheets in this processing temperature window is thus a complex process, different from fusion of purely amorphous polymer above T_g or semicrystalline polymer above T_m. In this study, the interfacial morphological development during fusion bonding of supercooled PET in the temperature window between T_g and T_m was studied. A unique double‐zone interfacial morphology was observed at the bond. Transcrystals were found to nucleate at the interface and grow inward toward the bulk and appeared to induce nucleation in the bulk to form a second interfacial region. The size and morphology of the two zones were found to be significantly affected by the fusion bonding conditions, particularly the fusion temperature. The fusion bonding strength determined by the peeling test was found to be significantly affected by the state of crystallization and the morphological development at the bonding interface. Based on the interfacial morphology observed and the bonding strength measured, a fusion bonding mechanism of crystallizable amorphous polymer was proposed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Enhancing mechanical properties of aromatic polyamide fibers containing benzimidazole units via temporarily suppressing hydrogen bonding and crystallization

The copolymerization modified poly(p‐phenylene terephthalamide) containing 2‐(4‐aminophenyl)?5‐aminobenzimidazole (PABZ) units in the main chain was synthesized and the corresponding poly‐p‐phenylene‐benzimidazole‐terephthalamide (PBIA) fibers were prepared by wet spinning. The HCl, the by‐product released during polymerization, can complex with PABZ units to prevent the formation of hydrogen bonding between PABZ units, resulting in amorphous PBIA fibers and a lower glass transition temperature (T_g). Therefore, for the purpose of gaining strong hydrogen bonding and high orientation degree at the same time in PBIA fibers, two‐step drawing–annealing processing was adopted. The as‐spun PBIA/HCl complex fibers were drawn first at 280°C, higher than the T_g of the PBIA/HCl complex fibers and lower than the decomplexed temperature of HCl, which temporarily suppresses the formation of hydrogen bonding and crystallization. Subsequently, the fibers were annealed to reform hydrogen bonding between PABZ units and crystallization via decomplexation of HCl at 400°C. However, when the drawing is above the decomplexed temperature of HCl, the decomplexation of HCl begins to occur which leads to the reform of hydrogen bonding and crystallization, and the tensile strength of the drawn‐annealed PBIA/HCl complex fibers decreases with a decrease in the HCl content of fibers. The tensile strength of two‐step drawn‐annealed fibers increased by approximately 15% compared to that of one‐step drawn PBIA/HCl complex fibers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42482.     

Fluorinated poly(aryl thioether)s and poly(aryl sulfone)s derived from 2,3,4,5,6‐pentafluorobenzoic acid

Poly(aryl thioether)s (F‐PTEs) containing 2,3,5,6‐tetrafluoro‐1,4‐phenylene moiety and polar moiety, such as 1,3,4‐ozadiazole, ether ketone, and amide groups, were synthesized by nucleophilic aromatic substitution reaction of aryl fluorides and 4,4′‐thiobisbenzenthiol. F‐PTEs were amorphous with good thermal properties including high glass transition temperature (T_g) and thermal stability, solubility, and hydrophobicity. F‐PTEs were transformed into poly(aryl sulfone)s (F‐PSs) by the oxidation reaction with hydrogen peroxide in acetic acid. Because of the sulfone group, the T_gs of the F‐PSs were 30–40°C higher than those of the corresponding F‐PTEs. F‐PSs maintained solubility in polar aprotic solvents and exhibited hydrophobicity in spite of the content of polar sulfone groups due to the highly substituted fluorine atoms. These F‐PTEs and F‐PSs were a new class of high‐performance polymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The glass transition temperature of nitrated polystyrene/poly(acrylic acid) blends

Low-molecular-weight polystyrene was nitrated to different levels. The nitrated polystyrene was blended with different molecular weights of poly(acrylic acid), PAA. The glass transition temperatures (T_g) for the mixtures were investigated by differential scanning calorimetry. A single T_g was observed for all blends, indicating single-phase blends. In general, it was found that the T_g increases with molecular weight of PAA. The T_g values of the blends showed a positive deviation from the linear average T_g as a result of strong hydrogen bonding between the segments of the component polymers. The observed T_g values were not adequately represented by simple predictive equations or by single-parameter fitting equations. However, two-parameter fitting equations gave a reasonable representation of the data.     

Thermal and mechanical properties of plasticized poly(L‐lactic acid)

Acetyl tri‐n‐butyl citrate (ATBC) and poly(ethyleneglycol)s (PEGs) with different molecular weights (from 400 to 10000) were used in this study to plasticize poly(L‐lactic acid) (PLA). The thermal and mechanical properties of the plasticized polymer are reported. Both ATBC and PEG are effective in lowering the glass transition (T_g) of PLA up to a given concentration, where the plasticizer reaches its solubility limit in the polymer (50 wt % in the case of ATBC; 15–30 wt %, depending on molecular weight, in the case of PEG). The range of applicability of PEGs as PLA plasticizers is given in terms of PEG molecular weight and concentration. The mechanical properties of plasticized PLA change with increasing plasticizer concentration. In all PLA/plasticizer systems investigated, when the blend T_g approaches room temperature, a stepwise change in the mechanical properties of the system is observed. The elongation at break drastically increases, whereas tensile strength and modulus decrease. This behavior occurs at a plasticizer concentration that depends on the T_g‐depressing efficiency of the plasticizer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1731–1738, 2003     

Preparation and characterization of modified telechelic natural rubber-based pressure-sensitive adhesive

Telechelic natural rubber (TNR) was prepared by the use of potassium persulfate and propanal at 70 °C and various degradation times from 0 to 30 h. These samples were then grafted by maleic anhydride (MA) in toluene solution before modification with 3-amino-1,2,4-triazole (ATA) to produce modified TNRs (AMTNRs). Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was used to identify the chemical compositions. Carboxyl and hydroxyl groups of TNRs were clearly observed, due to chain scission, oxidation, and modified chain ends. The viscosities of TNRs were dropped greatly after 5 h and then decreased slowly as a function of degradation time. ATR-FTIR spectra of AMTNRs showed amide bonds between ATA and MA groups, and then the multiple hydrogen bonding arrays were formed. The glass transition temperatures (T_g) of AMTNRs were determined by differential scanning calorimetry. The T_g of AMTNR_0 moved to a higher temperature of –55 °C after modification by ATA, confirming the formation of multiple hydrogen bonding arrays. However, the T_g of AMTNR_5 to AMTNR_30 decreased slightly due to chain scission in the degradation process. The adhesive properties of AMTNR-based pressure-sensitive adhesive were evaluated by a Lloyd adhesion tester. The tack of AMTNRs depended on wettability whereas peel and shear strengths were responded by a combination between wettability and multiple hydrogen bonding arrays.     

Experimental assessment of the thermodynamic theory of the compositional variation of Tg: PVC systems

The glass-transition temperatures (T_g's) and specific heats (C_p) of poly(vinyl chloride) (PVC) and PVC plasticized with 5–120 phr di(2-ethylhexyl) adipate (DOA) and tri(2-ethylhexyl) trimellitate (TOTM) have been determined by differential scanning calorimetry (DSC). Measured T_g's were compared to predictions by the Couchman and Karasz (C–K) thermodynamic theory, three related empirical equations, and a new equation obtained from the C–K relation by assuming the product T_gΔC_p to be constant. It was found that the T_g's of the PVC/TOTM mixtures are adequately predicted only by the C–K and the derivative relation. The T_g's of the PVC/DOA mixtures follow a sigmoidal or cusp-like dependence on plasticizer composition as has been observed for some other PVC/plasticizer mixtures. In this case, the approximation afforded by the C–K or derivative equations is still superior to the empirical models over a wide composition range. Dynamic mechanical analysis of the PVC/DOA mixtures suggests that the DSC transitions may consist of two overlapping phase transitions. The reported sigmoidal composition dependence of the DSC T_g's may therefore result from the measured T_g's being weighted towards the temperature corresponding to the predominant dynamic mechanical transition (i.e., the high T_g phase at low plasticizer concentrations and the low T_g phase at high plasticizer concentrations). In such cases of partial phase separation, the C–K or the derivative equation may be used to estimate the composition of the two phases at each overall plasticizer concentration.     

Sorption and transport of water vapor in nylon 6,6 film

The sorption and transport of water in nylon 6,6 films as functions of the relative humidity (RH) and temperature were studied. Moisture‐sorption isotherms determined gravimetrically at 25, 35, and 45°C were described accurately by the GAB equation. Water‐vapor transmission rates were enhanced above ≈ 60–70% RH, primarily due to the transition of the polymer from glassy to rubbery states. The glass transition temperatures (T_g's) of nylon 6,6 were measured at various moisture contents using differential scanning calorimetry. The results showed that the sorbed water acted as an effective plasticizer in depressing the T_g of the polyamide. Fourier transform infrared spectroscopy (FTIR) was utilized to characterize the interaction of water and the nylon. Evidence from FTIR suggested that the interaction of water with nylon 6,6 took place at the amide groups. Based on the frequency shift of the peak maxima, moisture sorption appeared to reduce the average hydrogen‐bond strength of the N H groups. However, an increase was seen for the CO groups. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 197–206, 1999     

Miscibility,crystallization behavior and specific intermolecular interactions in thermosetting polymer blends of novolac epoxy resin and polyethylene glycol

Thermosetting polymer blends of novolac epoxy resin (EPN) and polyethylene glycol (PEG) were studied. The miscibility and crystallization behavior of the blends before curing reaction were investigated by polarized optical microscopy and differential scanning calorimetry (DSC). Overall uncured blend compositions were homogeneous in amorphous state. Single composition‐dependent glass‐transition temperature (T_g) for each blend could be observed, and the experimental T_g's of blends with EPN content ≥40 wt% could be explained well by the Gordon–Taylor equation. Thermal properties of blends cured with 4,4′‐diaminodiphenylmethane were also determined by DSC. The capability of PEG to crystallize in cured blends was different from that in uncured ones because of the topological effect of highly crosslinking structure. On the basis of Fourier transform infrared spectroscopy results, it was judged that there were intermolecular hydrogen‐bonding interactions between EPN and PEG in both cured and uncured blends. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Influence of hydrogen bonding interaction on the damping properties of poly(n‐butyl methacrylate)/small molecule hybrids

The hydrogen bonding interactions between poly(n‐butyl methacrylate) and a series of low molecular weight phenols containing two to four hydroxyl groups with different steric effects were investigated by differential scanning calorimetry and Fourier‐transform infrared spectroscopy. Results showed that the hydrogen bonding strength between the two components varies greatly according to the steric effects of the phenolic hydroxyl group. As the size of the group beside the hydroxyl increases, the hydrogen bond strength weakens. The glass transition temperature of binary hybrid systems was put into relation with the corresponding hydrogen bonding interaction strength. Strong hydrogen bonding strength increased T_g to higher values than that predicted by the linear additivity rule; by contrast, T_g of hybrid systems with weak hydrogen bonds showed linear changes. All of the samples showed linear variations at low concentrations of small molecules. The damping properties of five systems were analyzed by dynamic mechanical analysis. Either the loss factor or area of tan δ peak of the five systems increased compared with that of the pure polymer, thereby showing great improvements in the damping properties of the poly(n‐butyl methacrylate)/small molecule hybrid material. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41954.     

Novel mucoadhesive polymer prepared by template polymerization of acrylic acid in the presence of silk sericin

A novel mucoadhesive polymer was prepared by template polymerization of acrylic acid in the presence of sericin for a transmucosal drug‐delivery (TMD) system. FTIR results indicated that a polymer complex was formed between poly(acrylic acid) (PAA) and sericin through hydrogen bonding. The glass transition temperatures (T_g's) of sericin and PAA in the PAA/sericin polymer complex were inner‐shifted compared with the T_g's of sericin and PAA themselves. This may be due to the increased miscibility of PAA with sericin through hydrogen bonding. The dissolution rate of the PAA/sericin interpolymer complex was dependent on the pH. The mucoadhesive force of the PAA/sericin polymer complex was similar to that of a commercial product, Carbopol 971P NF. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 274–280, 2001     

Specific interactions in 4‐hydroxybenzoic acid/poly(2‐vinylpyridine)/poly(N‐vinyl‐2‐pyrrolidone) blends

The specific interactions in ternary 4‐hydroxybenzoic acid (HBA)/poly(2‐vinylpyridine) (P2VPy)/poly(N‐vinyl‐2‐pyrrolidone) (PVP) blends were studied by differential scanning calorimetry, Fourier transform infrared (FTIR) spectroscopy, and electron microscopy. FTIR study shows the existence of hydrogen‐bonding interactions between HBA and P2VPy as well as PVP. The addition of a sufficiently large amount of HBA produces a blend showing one glass‐transition temperature (T_g). Microscopic study shows a drastic reduction in domain size in single‐T_g blends. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 901–907, 2001     

Polymer blends of stereoregular poly(methyl methacrylate) and poly(styrene‐co‐p‐hydroxystyrene)

Isotactic, atactic, and syndiotactic poly(methyl methacrylates) (PMMAs) (designated as iPMMA, aPMMA, and sPMMA) were mixed with poly(styrene‐co‐p‐hydroxystyrene) (abbreviated as PHS) containing 15 mol % of hydroxystyrene separately in 2‐butanone to make three polymer blend systems. Differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy were used to study the miscibility of these blends. The three polymer blends were found to be miscible, because all the prepared films were transparent and there was a single glass transition temperature (T_g) for each composition of the polymers. T_g elevation (above the additivity rule) is observed in all the three PMMA/PHS blends mainly because of hydrogen bonding. If less effective hydrogen bonding based on the FTIR evidence is assumed to infer less exothermic mixing, sPMMA may not be miscible with PHS over a broader range of conditions as iPMMA and aPMMA. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 431–440, 1999     

Structure and properties of 6/6.9 copolyamide series. I. Amorphous phase

The amorphous phase of a series of random 6/6.9 copolyamides was investigated. It was characterized by the glass transition temperature (T_g) and the hydrogen bond content, as a function of the copolymer composition, compared to the corresponding homopolymers, polyamide 6 and polyamide 6.9. The hydrogen bonds in the amorphous phase have a major influence on the copolymer properties. The glass transition temperature decreases as either comonomer content increases, attaining a minimum value at about 1 : 1 molar composition. This is due to the decreased content of hydrogen bonds, their broader strength distribution, and the decreased degree of crystallinity. In addition to the usual effects, quenching in the present system causes the formation of a less dense and less regular hydrogen bonds network, reducing the T_g. Following room temperature aging, the usual hydrogen bond content is restored. © 1996 John Wiley & Sons, Inc.     

Preparation and characterization of novolac type phenolic resin blended with poly(dimethylsiloxane adipamide)

Phenolic resin/poly(dimethylsiloxane adipamide) (PDMSA) blends, which have been prepared, show miscibility due to intermolecular H‐bonding existing between phenolic resin and the PDMSA. The specific H‐bonding of novolac type phenolic/PDMSA blends was characterized by means of glass transition temperature behavior and Fourier Transform Infrared Spectroscopy (FTIR). The strength of intermolecular H‐bonding within the phenolic blend is a function of the H‐bonded group of the PDMSA modifier and corresponds to the deviation glass transition temperature (ΔT_g). Phenolic/PDMSA blends were completely miscible, as confirmed by the T_g study. The FTIR result is in good agreement with the inference from T_g behavior. The char yield of phenolic/PDMSA corresponds to the phenolic resin content. The molecular mobility of phenolic/PDMSA blends increases with PDMSA content in the phenolic‐rich region. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 984–992, 2002     

Plasticizer diffusion as the rate-determining step in dry blending of poly(vinyl chloride)

Differential thermal analysis has been used to examine the process of dry blending of plasticizer and PVC. The rate of transformation of the glass transition from that of the polymer initially in the cold mix to the glass transition of the blend (blend T_g) has been examined at various temperatures from room temperature to above the polymer T_g. The dependence on temperature of this rate of transformation of the observed T_g is similar to the temperature dependence of the diffusion of plasticizer into PVC. It is concluded that diffusion of plasticizer into polymer particles is the rate-determining step in the dry blending of PVC. It also appears that a single mechanism of diffusion is involved both below and above the glass transition of the polymer.     

Dynamic mechanical signatures of a polyester‐urethane and plastic‐bonded explosives based on this polymer

The complex shear moduli of the segmented polyurethane Estane 5703p, Livermore explosive (LX)‐14, and plastic bonded explosive (PBX)‐9501, which use this polymer as a binder, have been investigated. Segmented polyurethanes, such as Estane 5703, contain microphase‐separated hard segments in a rubbery matrix of soft segments. LX‐14 is composed of 95.5% 1,3,5,7‐tetranitroazacyclooctane (HMX) explosive with 4.5% Estane 5703 binder. PBX‐9501 is composed of 94.9% HMX, 2.5% Estane 5703p binder, 2.5% nitroplasticizer (NP), and about 0.1% antioxidant Irganox 1010. In the temperature range from ?150 to 120°C, two relaxations were observed as peaks in the loss modulus and tangent delta in Estane 5703p and LX‐14. A third relaxation was found in PBX‐9501. The low temperature relaxation associated with vitrification of the poly(ester urethane) soft segment occurred in the shear loss modulus (G″) at ?29 and ?26°C in Estane and LX‐14, respectively, at 1 Hz. In PBX‐9501 the Estane soft segment glass transition peak, T_g(SS), in the loss modulus occurred at ?40 ± 3°C at 1 Hz. The reduction in soft segment glass transition in PBX‐9501 is clear evidence of plasticization of the soft segment by NP. The apparent activation energy of the maximum in the loss modulus for LX‐14 and PBX‐9501 over the frequency range from 0.1 to 10 Hz was 230 kJ/mole (55 kcal/mole). The hard segment glass transition, T_g(HS), was observed as a peak in the loss modulus at about 70°C. In LX‐14 the transition was observed at lower temperatures (56–58°C at 1 Hz) depending on thermal history. There was a low temperature shoulder on the T_g(HS) of Estane 5703 associated with soft segment crystallinity. Modulated differential scanning calorimetry (MDSC) was used to verify the T_g(HS) in Estane and 50/50 mixtures of Estane with NP. In PBX‐9501 the hard segment glass transition occurred between 65 and 72°C. The presence of NP in PBX‐9501 gave rise to a new transition, T_eu(NP), between 8 and 15°C. This peak is believed to be associated with the eutectic melting of the plasticizer. Returns of fielded PBX‐9501 that were 6 and 11 years old were also measured. Small variations in T_g(SS) and the rubber plateau modulus were observed in these aged samples, consistent with migration of plasticizer and/or very low levels of chain scission. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1009–1024, 2002     

Solid state complexes of poly(L‐lysine) with metal chlorides from the 1st row of the d‐block

Solid state characterization of poly(L‐lysine)hydrobromide was obtained via differential scanning calorimetry, thermogravimetric analysis, optical microscopy and infrared spectroscopy. The glass transition temperature of poly(L‐lysine)hydrobromide is 178°C. This thermal transition has not been reported previously. Poly(L‐lysine)'s T_g decreases when complexes are produced with the following divalent transition metal chlorides; cobalt chloride hexahydrate, nickel chloride hexahydrate, copper chloride dihydrate and anhydrous zinc chloride. At 10 mol% salt, nickel, chloride decreases T_g by 45°C, and the general trend is Ni²⁺Co²⁺Zn²⁺Cu²⁺. The depression of poly(L‐lysine)'s T_g correlates well with ligand field stabilization energies for pseudo‐octahedral and pseudo‐tetrahedral dⁿ complexes (n = 7, 8, 10) from the 1^st row of the d‐block. However, d⁹ copper(II) complexes cannot be included in this empirical correlation. Infrared spectroscopic evidence suggests that Co²⁺, Ni²⁺ and Zn²⁺ coordinate to the carbonyl oxygen in the main chain of the polymer. When transition metal ions coordinate to C? O, the network of hydrogen bonded amide groups is disrupted, which lowers the glass transition. The amide I region of the infrared spectrum reveals a hydrogen bonded C? O stretch @ 1655 cm^?1 that is characteristic of poly(α‐amino acid) random coil conformations, and a metal‐ligand coordinated C? O stretch @ 1625 cm^?1 in complexes with divalent cobalt, nickel and zinc. The amide II region of the infrared spectrum near 1550 cm^?1 is also sensitive to the formation of coordination complexes with these d‐block metal chlorides.     

Influences of phase composition and thermomechanical conditions on shape memory properties of segmented polyurethanes with amorphous reversible phase

We synthesized series of shape memory polyurethanes with amorphous reversible phase (T_g‐SMPUs) and systematically studied their microphase structure and shape memory properties. The T_g‐SMPUs having no or less hard phase showed lower shape recovery. When the volume fraction of hard phase was in the range of 20–30%, the T_g‐SMPUs exhibited the highest shape recovery. As the fraction of hard phase increased further the shape recovery decreased, because more polymer components with higher glass transition temperatures (T_gs) would participate in strain storage. For the T_g‐SMPUs having similar T_gs, those polymers having higher volume fraction of hard phase exhibited higher shape fixity, broader shape recovery region, and larger recovery stress. Increasing deformation strain could raise shape fixity and recovery stress but broaden shape recovery region. The highest recovery stress of a material could be achieved when the deformation occurred at its glass transition temperature below which decreasing deformation temperature could not increase recovery stress further. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers