超长定向含铁多壁碳纳米管阵列的制备

采用无模板化学气相沉积法,以二茂铁为催化剂,二甲苯为碳源,利用单温炉加热装置制备了定向碳纳米管阵列。运用扫描电子显微镜、透射电子显微镜、拉曼光谱和X射线衍射仪等对定向碳纳米管阵列的形貌、成分和物相进行细致的分析和表征。结果表明:制得的碳纳米管阵列具有良好的定向性和多壁管状结构,并且石墨化程度高;碳纳米管中除碳元素外,管中包含有少量以纳米颗粒和纳米线形式存在的铁及其化合物,主要成分是铁和碳化铁。结合碳纳米管的制备和透射电子显微镜分析表征结果,认为超长碳纳米管阵列的生长模式为底部生长方式,即经历催化剂分解、催化、成核、长大、中毒、凝聚成粒和连接成线的循环过程,正是由于碳源和催化剂的连续供应促成了碳纳米管阵列的快速定向生长。     

快速生长超长定向碳纳米管阵列的制备及机理

 采用一种无模板的化学气相沉积法裂解金属有机物,以二茂铁为催化剂,二甲苯为碳源,利用单温炉加热装置在100 min内成功制备了2.7 mm超长定向碳纳米管阵列,生长速率高达27 μm·min^-1。运用扫描电子显微镜、透射电子显微镜、拉曼光谱对定向碳纳米管阵列进行形貌观察和表征,结果表明:制得的碳纳米管阵列具有优越的定向性和管结构,并且石墨化程度高。给出了快速生长超长定向碳纳米管阵列的优化制备条件,结合表征结果讨论了碳纳米管阵列的生长机制,认为超长碳纳米管阵列采用的是一种催化剂固定不动的开口生长方式,碳源和催化剂的连续供应保证了超长碳纳米管阵列的快速生长。     

基于HRTEM和Raman分析定向多壁碳纳米管阵列的生长机理

以二茂铁、二甲苯为前驱体,石英为衬底,在850 oC的管式炉内采用化学气相沉积法制备出了定向碳纳米管阵列. 高分辨透射电子显微镜和拉曼光谱的结果表明：碳纳米管阵列具有良好的定向性和多壁管状结构,石墨化程度高,并且只在表面存在少量单壁碳纳米管.定向多壁碳纳米管阵列的生长模式为“底部”生长模式,即在生长的初期,当催化剂颗粒较小时,析出的碳原子生成了单壁碳纳米管或与其性质类似的多壁碳纳米管(一般层数小于5层);催化剂颗粒逐渐长大后,大量的碳原子析出后生成了普通的多壁碳纳米管,从而形成了单壁碳纳米管只存在于碳纳米管阵列膜表面和多层碳纳米管膜表面与界面的现象.     

化学气相沉积法制备定向碳纳米管阵列

以二茂铁和二甲苯分别作为催化剂和碳源，采用一种无模板的化学气相沉积法，使用单温炉设备，成功地制备了高度定向的碳纳米管阵列.分别用扫描电子显微镜、透射电子显微镜和电子能量散射谱、拉曼光谱对碳纳米管阵列进行形貌观察和表征, 并研究了不同工艺参数对碳纳米管阵列形貌的影响.结果表明：在生长温度为800℃，催化剂浓度为0.02g/mL，抛光硅片上容易获得高质量的定向碳纳米管阵列，在此优化条件下生长的定向碳纳米管的平均生长速率可达25μm/min.     

生长参数对碳纳米管阵列制备的影响

利用化学气相沉积法在沉积铁纳米颗粒的硅衬底上制备了垂直方向高度有序的碳纳米管阵列．扫描电子显微镜的观测发现，碳纳米管阵列的形貌受到若干生长参数的影响，包括催化剂颗粒大小、反应温度和反应气体的分压等．研究发现，当反应温度升高，或反应气体中碳源气体含量增加时，碳纳米管变粗、变短．当催化剂薄膜的厚度减小时，碳纳米管的直径随之减小而纳米管阵列的高度则先增后减，有一个最大值．这些结果表明，碳纳米管的直径和阵列的高度可通过选择合适的反应温度、匀胶机转速和反应气比率来调节．     

阵列碳纳米管的石墨化程度

采用化学气相沉积法制备了阵列碳纳米管薄膜,对阵列碳纳米管的石墨化程度进行了系统研究。利用扫描电子显微镜(SEM)、拉曼光谱(Raman)对样品形貌以及结构进行了表征。探讨了不同实验参数对阵列碳纳米管石墨化程度影响的机理。结果发现,在一定催化剂浓度范围内,催化剂浓度过低时,阵列碳纳米管的石墨化程度较差,而随着催化剂浓度的增加,阵列碳纳米管的石墨化程度逐渐变好;生长石墨化程度较好的阵列碳纳米管需要合适的进液速度,进液速度过低或过高都会使得碳纳米管的石墨化程度变差;此外,生长石墨化程度较好的阵列碳纳米管也需要合适的生长温度,生长温度过低或过高都会使得碳纳米管的石墨化程度变差。     

碳纳米管制备条件探索及对亚甲基蓝的吸附性能

探索了用气相沉积法制备碳纳米管时,不同温度、催化剂浓度、反应时间对碳纳米管定向性、径向管径、表面性能的影响,结果表明,反应温度750℃、催化剂浓度5g/100mL、反应时间30min是制备碳纳米管的最佳实验条件。在最佳条件下制备碳纳米管并进行对亚甲基蓝吸附的研究,探索了吸附时间、pH、吸附浓度、温度对吸附结果的影响。     

面向热界面应用的多壁碳纳米管阵列生长优化

由于杰出的导热和柔韧性能,碳纳米管被认为是提升大功率微电子系统热耗散性能的理想热界面材料。多壁碳纳米管阵列能实现低成本的大规模生产,成为制备热界面材料的最佳选择。但是多壁碳纳米管阵列的生长过程的最优因素尚未廓清。本文从实验上系统研究了催化剂的升华温度对浮动催化化学气相沉积法制备出的多壁碳纳米管阵列结构及热输运的影响规律,得到了最佳的催化剂升华温度,为实现最优导热性能的多壁碳纳米管阵列热界面材料提供实验指导。     

V型热解火焰合成碳纳米管的催化剂选择与分析

碳纳米管是一种新型碳材料.催化剂是碳纳米管制备中的重要影响因素,而燃烧法合成碳纳米管必须使用催化剂.本文利用V型热解火焰来研究碳纳米管的合成条件,主要在理论和实验两个方面分析研究了催化剂的作用、种类、颗粒大小、失活等方面对碳纳米管生长的影响,从而为V型热解火焰法合成碳纳米管时催化剂的选取提供依据.理论分析和实验结果表明: Fe(CO)5作为一种铁剂催化剂非常适合催化CO合成碳纳米管.利用碳的"溶解-扩散-析出"机理可以用来解释Fe(CO)5催化CO合成碳纳米管的过程.     

碳纳米管阵列拉曼光谱的对比研究

利用热化学气相沉积技术制备碳纳米管阵列,并对不同工艺下获得的一系列定向碳纳米管阵列进行了拉曼光谱的对比研究。研究发现：碳纳米管阵列一阶拉曼光谱的G峰中心和D峰中心都会向低波数方向发生红移。并且阵列中碳管的一致性、准直性越好,红移的波数就越多。除了谱峰以外,D线和G线的积分强度比I_D / I_G也能够反映所研究的碳材料的有序度和完整性。I_D / I_G越低,说明该碳纳米管阵列的石墨化越好,无定形碳杂质越少。     

热丝和射频等离子体化学气相沉积法制备定向碳纳米管薄膜

采用热丝和射频等离子体复合化学气相沉积设备(PE-HF-CVD),以CH4、H2和N2为反应气体.在较低衬底温度下(500℃),用简单的催化剂制备方法--旋涂法在硅片上涂覆Ni(NO3)2溶液,经热处理及H2还原后的Ni颗粒为催化剂,在硅衬底上制备出了垂直于硅片且定向生长的碳纳米管薄膜.扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果显示,1 mol/l的硝酸镍溶液旋涂硅片所得催化剂制得的碳纳米管管径为30～50 nm,长度超过4μm,定向性好.并用拉曼光谱(Raman)对不同摩尔浓度Ni(NO3)2溶液条件下制备的碳纳米管薄膜样品进行了表征.     

LiFePO<Subscript>4</Subscript>/C with high capacity synthesized by carbothermal reduction method

The olivine-type LiFePO₄/C cathode materials were prepared via carbothermal reduction method using cheap Fe₂O₃ as raw material and different contents of glucose as the reducing agent and carbon source. Their structural and morphological properties were investigated by X-ray diffraction, scanning electron microscope, transmission electron microscope, and particle size distribution analysis. The results demonstrated that when the content of the carbon precursor of glucose was 16 wt.%, the synthesized powder had good crystalline and exhibited homogeneous and narrow particle size distribution. Even and thin coating carbon film was formed on the surface of LiFePO₄ particles during the pyrolysis of glucose, resulting in the enhancement of the electronic conductivity. Electrochemical tests showed that the discharge capacity first increased and then decreased with the increase of glucose content. The optimal sample synthesized using 16 wt.% glucose as carbon source exhibited the highest discharge capacity of 142 mAh g⁻¹ at 0.1C rate with the capacity retention rate of 90.4% and 118 mAh g⁻¹ at 0.5C rate.     

Zinc oxide catalyzed growth of single-walled carbon nanotubes

We demonstrate that zinc oxide can catalyze the growth of single-walled carbon nanotubes (SWNTs) with high efficiency by a chemical vapor deposition process. The zinc oxide nanocatalysts, prepared using a diblock copolymer templating method and characterized by atomic force microscopy (AFM), were uniformly spaced over a large deposition area with an average diameter of 1.7 nm and narrow size distribution. Dense and uniform SWNTs films with high quality were obtained by using a zinc oxide catalyst, as characterized by scanning electron microscopy (SEM), Raman spectroscopy, AFM, and high-resolution transmission electron microscopy (HRTEM).     

磁性碳纳米管吸附去除水中甲基橙的研究

采用高温催化裂解法制备碳纳米管,对其用浓硝酸氧化法进行纯化处理,并用化学共沉淀方法制备了磁性碳纳米管(简称磁性管)。利用场发射扫描电子显微镜对磁性管进行了表征。将磁分离技术应用于碳纳米管吸附性能研究,探索碳纳米管负载磁性颗粒后对甲基橙的吸附性能,寻找最佳实验条件,对吸附质溶液进行紫外-可见吸收光谱分析。同时,进行了磁性管的脱附和再吸附性能研究。     

Comparative study on diameter distribution of single-walled carbon nanotubes using growth templates with different pore sizes: Zeolite-L,ZSM-5, and MCM-41

We report a comparative study on diameter distribution of single-walled carbon nanotubes (SWNTs) grown using nanoporous templates having different pore sizes, namely, zeolite-L, ZSM-5, and MCM-41. The change in the tube diameter based on catalytic film thickness and growth temperature was systematically investigated. We prepared very thin Fe catalyst films with nominal thicknesses of 0.5, 0.7, 1, and 2 Å, and the growth temperature was varied from 850 to 925 °C. We found that the SWNT mean diameter and size distribution width decreased with decreasing catalyst film thickness, growth temperature, and pore sizes of the templates. In addition, all SWNTs grown from the nanoporous templates have narrower diameter distribution compared to the SWNTs grown from SiO₂ planar surface. The obtained results are straightforward and suggest that the template growth has potential for SWNT growth with very narrow diameter distribution.     

Synthesis of single- and multi-wall carbon nanotubes over supported catalysts

The quantities of deposited carbon were measured and the quality of the nanotubes was characterized by means of transmission electron microscopy and scanning tunneling microscopy. The inner and outer diameters of the nanotubes were also measured and the diameter distribution histograms were established. The multi-wall straight and coiled nanotubes were found to be quite regular with an average inner (outer) diameter of 4–7 nm (15–25 nm) and with lengths up to 50 μm. The walls contain concentric cylindrical graphene sheets separated by the graphitic interlayer distance. The single-wall nanotubes were found as bundles of hundreds of aligned straight 1-nm-diameter nanotubes with lengths up to 1-μm. The influence of various parameters such as the method of catalyst preparation, the nature and the pore size of the support, the nature of the metal, the quantity of catalyst active particles, and the reaction conditions on the nanotubes formation were studied. The numbers and dimensions of the catalyst active particles dispersed on the support were found to be of importance in regulating the shape of the produced nanotubes. Following these results, a model of growth mechanism was suggested for the nanotubes obtained by this method. Received: 5 January 1998     

Nanoparticle Distribution in Three‐Layer Polymer–Nanoparticle Composite Films: Comparison of Experiment and Theory

The distribution of hydrophobic nanoparticles deposited on a hydrophilic polymer film is investigated by scanning electron microscopy, transmission electron microscopy, and atomic force microscopy before and after spin‐coating a polymer solution on the particle film and drying it at room temperature. Various polymers and solvents are used. To reach equilibrium, all investigated systems are annealed additionally above the glass transition temperature (T_g) of the polymers. The compatibility of the interacting components is estimated by calculating their surface energy, solubility, and mutual interaction parameters. The experimental results show a redistribution of the particles on both interfaces of the polymer film. This corresponds to the calculated immiscibility of particles and polymers. The distribution of the nanoparticles at the interfaces is related mainly to the vapor pressure of the solvent, that is, kinetic effects during spin‐coating. Only minor contributions result from surface energy, solubility, and interaction parameters.     

Catalytic soot oxidation in microscale experiments: Simulation of interactions between co-deposited graphitic nanoparticle agglomerates and platinum nanoparticles

Continuously regenerating catalytic soot traps are under development to reduce particulate emissions from diesel exhaust. A good understanding of the processes that take place during soot oxidation is needed to optimize diesel soot trap performance. To gain insight into these processes from the perspective of nanoparticle technology, the effects of catalyst particle size and the interparticle distance between soot and catalyst particles were measured. A model catalyst was prepared by depositing Pt nanoparticles on a SiO/SiO₂-coated transmission electron microscope (TEM) grid. A soot surrogate composed of graphitic nanoparticle agglomerates generated by laser ablation was deposited on the same surface. This system simulates, morphologically, catalytic soot traps used in practice. The reaction was carried out in a tubular flow reactor in which the gas phase simulated diesel exhaust gas, composed of a mixture of 10% O₂ and 1000 ppm NO with the remainder N₂. The progress of the carbon nanoparticle oxidation was monitored off-line by analysis of electron microscopy images of the agglomerates before and after reaction. This experimental method permitted the correlation of reaction rate with particle sizes and separation distances as well as catalyst surface area in the direct environs of the soot particles. The experimental results revealed no effect of Pt catalyst particle size in the range 7–31 nm on the rate of reaction. Also observed were a decrease in the rate of reaction with increasing distance between carbon agglomerates and catalyst particles and a linear dependence of the reaction rate on the fractional catalyst surface area coverage.     

Fabrication and characterization of chemically bonded polysilsesquioxane-polyacrylate hybrid latex particles

This paper attempted to prepare hybrid particles in which the inorganic and organic components were chemically bonded in simplification. The polymethacryloxypropylsilsesquioxanes-polyacrylate (PMPS-PA) latex particles were prepared through seeded emulsion polymerization using polymethacryloxypropylsilsesquioxanes (PMPS) as seed. As a reference, silica-polyacrylate (S-PA) latex particles were obtained with similar method. Fourier transform infrared spectroscopy, dynamic light scattering and transmission electron microscopy were used to characterize the chemical composition and morphology of the resultant hybrid particles. The results showed that PMPS-PA particles were uniformly spherical with core-shell morphology and possessed narrow size distribution, whereas S-PA hybrid particles were not uniform as PMPS-PA particles and had bimodal size distribution. The surface properties, optical properties and thermal stability of the corresponding films were investigated by scanning electron microscopy, UV–Vis spectroscopy and thermogravimetric analysis. Comparatively, PMPS-PA film exhibited smoother surface, larger optical transmittance and better thermal stability than S-PA film. These could be attributed to PMPS that were chemically bonded with PA phases, whereas weak interactions between silica and PA phases in S-PA, where silica surface modification was usually required to increase the surface interactions. Thus, PMPS particles containing reactive carbon-carbon double bond could be prospective and be directly used as seeds in the following emulsion polymerization to prepare chemically bonded hybrid particles.     

用微米级LaNi5为催化剂生长的碳管的ESR谱研究

用微米级LaNi₅合金粉末为催化剂, 以乙炔为原料, 采用化学气相沉积(CVD)法合成了多壁碳纳米管. 在100~290 K温度下测量了41 μm≤d≤150 μm粒径催化剂制备的不同直径分布的碳纳米管的电子自旋共振（ESR）谱,研究了测量温度、微米级催化剂粒径及制备过程的氢气氛对生成的碳纳米管的ESR谱线型、g因子、线宽的影响. 发现碳纳米管的g因子随其直径的增大而增大,分别为2.040 0（催化剂粒径41 μm≤d≤50 μm, 碳纳米管的直径分布为10 nm到20 nm）和2.089 8（催化剂粒径100 μm≤d≤150 μm,碳纳米管的直径分布为70 nm到120 nm）. 发现小管径纳米管的ESR谱图有一个峰, 而大管径纳米管的ESR谱图有两个峰A和B, 且随测量温度的升高, 峰B强度增大.