Preparation of TiO2 Thin Film and Its Antibacterial Activity

TiO2 nanometer thin films with photocatalytic antibacterial activity were prepared by the sol-gel method on fused quartz and soda lime glass precoated with a SiO2 layer. The thin films were characterized by X-ray photoelectron spectroscopy ( XPS ), scanning electron microscopy (SEM), and X- ray diffraction ( XRD ). The results show that sodium and calcium diffusion into nascent TiO2 film is effectively retarded by the SiO2 layer precoated on the soda lime glass, The antibacterial activity of the films was determined. The crystalline of TiO2 nanometer thin film has important effects on the antibacterial activity of the film.     

Preparation of Ag-doped TiO_2 Thin Film by Sol-gel Method

The Ag-TiO2 thin film has been prepared on glass substrate by sol-gel process . The structure and properties of the materials were studied by DTA , XRD, and EPR. The photocatalytic activity was examined by the photocatalytic degradation of dichlorophos. The analysis results indicate that the photocatalytic activity of the Ag-TiO2 thin film is higher than that of pure TiO2 thin film. It is also influenced by the content of anatase and heating temperature . The ESR result shows that the Ag-TiO2 thin film has more hydroxide radicals than pure TiO2 thin film after illuminated by UV light.     

STUDY ON PHOTOCATALYTIC MECHANISM OF SOL-GEL-DERIVED Pb-DOPED TiO_2 THIN FILMS

Pb-doped TiO2 photocatalytic thin films were prepared on a soda-lime glass substrate via sol-gel method using TiO2 sol solution containing lead and characterized by X-ray photoelectron spectroscopy (XPS). The results showed that besides oxides of Ti(IV) there is a certain amount of oxides of To(Ⅲ) and Ti(Ⅱ) and Pb exists in the forms of PbTiO3 and PbO. The photocatalytic activity of the Pb-doped TiO2 films was evaluated by the photocatalytic decolorization of aqueous methyl orange and photocatalytic mechanism mas also analyzed.     

Grain Size and Photocatalytic Activity of Nanometer TiO_2 Thin FilmsPrepared by the Sol-gel Method

Transparent anatase TiO2 nanometer thin films with photocatalytic activity were prepared via the sol-gel method on soda-lime glass. The thickness , crystalline phase, grain size, surface hydroxyl amount and so on were characterized by scanning electron microscopy (SEM) , X-ray diffraction (XRD), transmission electron microscopy ( TEM), X-ray photoelectron spectroscopy (XPS) and UV-visible spectrophotometer ( UV-VIS). The photocatalytic activity of TiO2 thin films was evaluated for the photocatalytic decolorization of aqueous methyl orange . The effects of film thickness on the crystalline phase, grain size, transmittance and photocatalytic activity of nanometer Ti02 thin films were discussed.     

Preparation, characterization and photocatalytic behavior of WO3-TiO2/Nb2O5 catalysts

TiO2/Nb2O5 photocatalyst loaded with WO3 (WO3-TiO2/Nb2O5) was prepared by a modified hydrolysis process, and characterized by X-ray diffractometry, transmission electron microscopy, Raman spectra and UV-Vis diffuse refraction spectroscopy. The photocatalytic activity of WO3-TiO2/Nb2O5 was investigated by employing splitting of water for O2 evolution. The results indicate that WO3 loading can pronouncedly improve the photocatalytic activity of TiO2/Nb2O5 by using Fe3 as an electron acceptor under UV irradiation. The optimum molar fraction of the loaded WO3 is 2%, and the largest speed of O2 evolution for 2% WO3-TiO2/Nb2O5 catalyst is 151.8 μmol/(L·h).     

Effect of heat-treatment on crystalline phase and UV absorption of 60CeO2-40TiO2 thin films by magnetron sputtering

60CeO2-40TiO2 thin films were deposited on soda-lime silicate glass substrates by R.F. magnetron sputtering. The effects of heat-treatment on the UV-absorption of the thin films were studied on the 60CeO2-40TiO2 thin film with the largest UV cut-off wavelength. The sample films with CeO2:TiO2=60:40 were heated at 773 K, 873 K, 973 K for 30 min. These films are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy and spectrometer (XPS). XRD analysis proves that the addition of TiO2 to CeO2 changed the crystalline state of CeO2. But the UV absorption effect of CeO2-TiO2 films with CeO2 crystallite phase is inferior to that of the amorphous phase CeO2-TiO2 films. XPS analysis also indicates that the amorphous phase CeO2-TiO2 films have the most Ce3+ content in these films. Amorphous phase and crystalline phase of the CeO2-TiO2 films have different effects on UV absorption of the thin films.     

Preparation and Properties of Ag—TiO2 Thin Films on Glass SUbstrates

Ag-TiO2 thin films were prepared on glasses.The morphology and structure of Ag-TiO2 films were investigated by XRD.SEM and FT-IR.The photocatalytic and hydrophilic properties of Ag-TiO2 thin films were also evaluated by examining photocatalytic degradation dichlorophos under sunlight illumination and the change of contact angle respectively.The research results show that the Ag-TiO2 thin film is mainly composed of 20-100nm Ag and TiO2 particles,The Ag-TiO2 thin films possess a super-hydrophilic ability and higher photocatalytic activity than that of pure TiO2 thin film.     

Preparation and Characterization of Fe^3＋ -doped Nanometer TiO2 Photocatalysts

Fe^3＋ -doped nanometer TiO2 photocatalysts were prepared by sol-gel technique. TiO2 powders with different Fe^3＋ / Ti^4 ＋ molar ratios ranging from 0. 05% to 25% were synthesized by calcinating the gels in the temperature range of 200-600 ℃ . The effects of the content of iron ions and calcination temperature on the physical properties of the powders and their photocatalytic activities were examined by the photodecorapositon of methyl orange in sunlight. The results show that Fe dopant can decrease the temperature of nanatase-ratile transformation. The ideal photocatalytic property was achieved when the sample with an Fe^3＋ / Ti^4＋ ratio of 20 at% was calcined at about 300 ℃ for an hour, which is superior to that of commercial Degussa P-25. The optimum microstructure of the Fe-doped TiO2 for a high photocatalytic activity in sunlight is consisted of nanatase and ratile.     

Low Temperature Coating of Anatase Thin Films on Silica Glass Fibers by Liquid Phase Deposition

Uniform crystalline TiO2 thin films were coated on silica glass fibers by liquid phase deposition from aqueous solution of ammonium hexafluorotitanate at low temperature. TiO2 thin films and nanopowders were prepared by adding H3BO3 into （NH4）2TiF6 solution supersaturated with anatase nano-crystalline TiO2 at 40 ℃. The effects of the deposition conditions on the surface morphology, section morphology, thickness of the deposited TiO2 thin films were investigated. The results indicate that the growth rate and particle size of the thin films were controlled by both the deposition conditions and the amount of anatase nano-crystalline TiO2.     

Morphology and conductivity of in-situ PEO-LiClO4-TiO2 composite polymer electrolyte

PEO-LiClO4-TiO2 composite polymer electrolyte films were prepared. TiO2 was formed directly in matrix by hydrolysis and condensation reaction of tetrabutyl titanate. The crystallinity, morphology and ionic conductivity of composite polymer electrolyte films were examined by differential scanning calorimetry, scanning electron microscopy, atom force microscopy and alternating current impedance spectroscopy, respectively. The glass transition temperature and the crystallinity of composite polymer electrolytes are decreased compared with those of PEO-LiClO4 polymer electrolyte film. The results show that TiO2 particles are uniformly dispersed in PEO-LiClO4-5%TiO2 composite polymer electrolyte film. The maximal conductivity of 5.5×10^-5 S/cm at 20℃ of PEO-LiClO4-TiO2 film is obtained at 5% mass fraction of TiO2.     

Mechanism and behaviors of Cr3+-doped TiO2

TiO₂ powder and TiO₂ thin film on the surface of glazed ceramic tile were prepared by sol-gel method. The influences of different doping Cr³⁺ concentration on the photocatalytic activity of TiO₂ were discussed, UV-visible and X-ray diffraction analysis were used to test the performance of TiO₂ powder and film. The results indicate that photocatalytic activity of doping Cr³⁺-TiO₂ thin film is higher than that of powder, and the interaction between Cr³⁺-doped and substrate can greatly enhance the photocatalytic activity. The results of X-ray diffraction and photoabsorption show that the Cr³⁺-doped energy level in TiO₂ is 0.62 eV high from the top of valence band, which belongs to the type of deep energy level doping. On the basis of the semiconductor energy level theory and Cr³⁺ dopant energy level, the semiconductor energy level model of Cr³⁺ in TiO₂ powder and thin film were established, and the doping mechanisms of Cr³⁺-doped in TiO₂ powder and thin film were analyzed. Foundation item: Project (20466001) supported by the National Natural Science Foundation of China     

Preparation and characterization of CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>/SnO<Subscript>2</Subscript>:Sb films deposited on glass substrates by R.F. sputtering

CeO2-TiO2 films and CeO2-TiO/SnO2：Sb （6 mol%） double films were deposited on glass substrates by radio-frequency magnetron sputtering （R.F. Sputtering）, using SnO2：Sb（6 mol%） target, and CeO2- TiO2 targets with different molar ratio of CeO2 to TiO2 （CeO2：TiO2-0：1.0; 0.1：0.9; 0.2：0.8; 0.3：0.7; 0.4：0.6; 0.5：0.5; 0.6：0.4; 0.7：0.3; 0.8：0.2; 0.9：0.1; 1.0：0）. The films are characterized by UV-visible transmission and infrared reflection spectra, scanning electron microscopy （SEM）, Raman spectroscopy, X-ray photoelectron spectroscopy （XPS） and X-ray diffraction （XRD）, respectively. The obtained results show that the amorphous phases composed of CeO2-TiO2 play an important role in absorbing UV, there are Ce^3-, Ce^4- and Ti^4- on the surface of the films; the glass substrates coated with CeO2-TiO2 （Ce/Ti=0.5：0.5; 0.6：0.4）/SnO2：Sb（6 mol%） double films show high absorbing UV（〉99）, high visible light transmission （75%） and good infrared reflection （〉70%）. The sheet resistance of the films is 30-50 Ω/□. The glass substrates coated with the double functional films can be used as window glass of buildings, automobile and so on.     

Self-cleaning glass coated with Fe~(3 )-TiO_2 thin film

1　INTRODUCTIONTheinfluenceofvariouschemicalsontheenvi ronmentisoneofthemostimportantsocialproblems .Therearemanywaystoabatethepollutionfromthechemicals .Oneofthemostpromisingtechniquesistooxidesuchchemicalsbyphotocatalysis .SinceFranketalreportedthepossibilityofusingTiO2 todecom posecyanideinwaterin 1977[1] ,therehasalsobeenincreasinginterestinenvironmentalapplicationsoftheoxide[2 4 ] .Althoughthemechanismoftitaniumdioxidephotocatalysishasbeenclarified ,therehavebeenfewsuccessfulindustr…     

Light energy conversion device for photocatalyst 2.0%WO3-TiO2 with oxygen vacancies for water splitting

Using carbon felt, polytetrafluoroethylene latex and powder catalyst to assembly a light energy conversion device, the photocatalytic activity of catalyst 2.0%WO₃-TiO₂ (2%WO₃ compounding TiO₂) with oxygen vacancies was studied through the water splitting for O₂ evolution, using a high pressure mercury lamp as the light source and Fe³⁺ as the electron acceptor in two different devices: an ordinary photolysis device with catalyst powder suspending through a magnetic stirrer and a self-assembly light energy conversion device. The results show that after 12 h irradiation, the photocatalytic activity of 2.0%WO₃-TiO₂ with oxygen vacancies in the self-assembly light energy conversion device is higher than that of the ordinary photolysis device, and the amount of oxygen evolution is about 12 and 9 mmol/L respectively in these two devices. After 12 h, the rates of O₂ evolution are slow in each device and the photocatalyst almost loses the photoactivity in the ordinary photolysis device. So, compared with the ordinary photocatalytic device, the rate of oxygen evolution and the life time of the catalyst are improved in the self-assembly light energy conversion device.     

Luminescent properties of BaO-La2O3-B2O3 glasses with dopant

The luminescent properties of glasses synthesized in air atmosphere by conventional high temperature process were stud{ed. The emissions spectra of Eu^2 and Eu^3 were observed in BaO-La2O3-B2O3-Eu2O3 glasses.The results show that the broad emission peaks at 430 nm correspond to 5d→4f emission transition of Eu^2 , the sharp emission peaks at 592, 616, 650 and 250 nm correspond to 5^D0→1Fj(j=1--4) emission transition of Eu^3 ,respectively, which indicates that the BaO-La2O3a-B2O3-Eu2O3 glass can convert ultraviolet and green omponents of sunlight into blue and red light so as to increase the intensity of blue and red light, respectively. The luminescent in--tensity of Eu^2 increases with increasing the molar ratio of Tb^3 in BaO-La2O3-B2O3-Eu2O3a-Tb4O3 glasses, whereas the luminescent intensity of Eua^3 decreases. So the luminescent intensity of Eu(Ⅲ,Ⅱ) is influenced by Tb^3 .These phenomena can be explained by electron transfer mechanism; Eu^3 (4f6) Tb^3 (4f^8)→Eu^2 (4f′) Tb^4 (4f′). Taking advantage of the luminescent properties of BaO-La2O3-B2O3-Eu2O3 glasses, light-conversion glass for agriculture can be produced.     

TiO2/ML-Ti3C2复合纳米材料的制备及其光催化性能

通过水热技术在二维(2D)多层材料Ti_3C_2 (multi-layer Ti_3C_2, ML-Ti_3C_2)的表面及层间原位晶化和生长锐钛矿相TiO_2纳米球,制备出TiO_2/ML-Ti_3C_2复合纳米材料。采用XRD、SEM、氮吸附等表征技术对TiO_2/ML-Ti_3C_2纳米复合材料进行分析表征,并以亚甲基蓝(MB)为模拟污染物,对纯TiO_2和TiO_2/ML-Ti_3C_2复合纳米材料的光催化性能进行了评价。实验结果表明,两种材料的耦合抑制了Ti O_2中光生电子-空穴对的湮灭,延长了复合光催化剂中载流子寿命,拓宽了复合材料的光谱响应范围。在紫外光照射下,以TiO_2/ML-Ti_3C_2复合纳米材料为光催化剂,200 mg/L的MB溶液在20 min内几乎完全脱色,降解率为98.98%。TiO_2/ML-Ti_3C_2纳米复合材料的光催化性能优于纯TiO_2和Ti_3C_2, Ti_3C_2优异的电子传输能力和超强的吸附性能优化了TiO_2的光催化性能。本研究为使用光催化技术处理废水提供了一种新的思路,具有一定的实际应用前景。     

Preparation of LiFePO4 for lithium ion battery using Fe2P2O7 as precursor

In order to obtain a new precursor for LiFePO4, Fe2P2O7 with high purity was prepared through solid phase reaction at 650 ℃ using starting materials of FeC2O4 and NH4H2PO4 in an argon atmosphere. Using the as-prepared Fe2P2O7, Li2CO3 and glucose as raw materials, pure LiFePO4 and LiFePO4/C composite materials were respectively synthesized by solid state reaction at 700 ℃ in an argon atmosphere. X-ray diffractometry and scanning electron microscopy（SEM） were employed to characterize the as-prepared Fe2P2O7, LiFePO4 and LiFePO4/C. The as-prepared Fe2P2O7 crystallizes in the Cl space group and belongs to β-Fe2P2O7 for crystal phase. The particle size distribution of Fe2P2O7 observed by SEM is 0.4-3.0 μm. During the Li^＋ ion chemical intercalation, radical P2O7^4- is disrupted into two PO4^3- ions in the presence of O^2-, thus providing a feasible technique to dispose this poor dissolvable pyrophosphate. LiFePO4/C composite exhibits initial charge and discharge capacities of 154 and 132 mA·h/g, respectively.