Thermal analysis applied in the crystallization study of SrSnO3

SrSnO₃ was synthesized by the polymeric precursor method with elimination of carbon in oxygen atmosphere at 250 °C for 24 h. The powder precursors were characterized by TG/DTA and high temperature X-ray diffraction (HTXRD). After calcination at 500, 600 and 700 °C for 2 h, samples were evaluated by X-ray diffraction (XRD), infrared spectroscopy (IR) and Rietveld refinement of the XRD patterns for samples calcined at 900, 1,000 and 1,100 °C. During thermal treatment of the powder precursor ester combustion was followed by carbonate decomposition and perovskite crystallization. No phase transition was observed as usually presented in literature for SrSnO₃ that had only a rearrangement of SnO₆ polyhedra.     

Hafnia sol-gel films synthesized from HfCl4: Changes of structure and properties with the firing temperature

Thin sol-gel hafnia films have been synthesised from HfCl₄, the synthesis has revealed to be a simple route to fabrication of hafnia films with high transparency in the UV-visible range. The films have been fired at different temperatures in air up to 1000°C and have been characterized by X-ray diffraction and Fourier transform infrared spectroscopy. Infrared absorption spectra of hafnia films have allowed to follow the formation of monoclinic crystalline phases together with XRD. Formation of monoclinic hafnia crystallites has been observed upon calcination at temperatures higher than 600°C, as shown by infrared spectroscopy and XRD. The optical transmission and the refractive index as a function of the temperature of firing have been characterized by UV-Visible spectroscopy and spectroscopic ellipsometry. The hafnia films, after firing at 600°C, had a refractive index of 1.92 with a thickness of around 70 nm.     

Effect of the modifier ion on the properties of MgFe<Subscript>2</Subscript>O<Subscript>4</Subscript> and ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> pigments

Magnesium and zinc ferrites have been prepared by the polymeric precursor method. The organic material decomposition was studied by thermogravimetry (TG) and differential thermal analysis (DTA). The variation of crystalline phases and particle morphology with calcination temperature were investigated using X-ray diffraction (XRD) and scanning electronic microscopy (SEM), respectively. The colors of the ferrites were evaluated using colorimetry. Magnesium ferrite crystallizes above 800°C, presenting a yellow- orange color with a reflectance peak at the 600–650 nm range, while zinc ferrite crystallizes at 600°C, with a reflectance peak between 650–700 nm, corresponding to the red-brick color.     

Influence of Calcination on the Properties of Nickel Oxide-Samarium Doped Ceria Carbonate (NiO-SDCC) Composite Anodes

Apart from its composition, the starting powder properties such as particle size potentially affect the triple phase boundary and the electrochemical performance. Calcination process has been identified as one of the factors that influence the particle size of the composite anode powders. This study investigates the correlation between calcination temperature and properties (i.e., chemical, physical, and thermal) of NiO–samarium-doped ceria carbonate (SDCC) composite anodes. NiO–SDCC composite anode powder was prepared with NiO and SDCC through high-energy ball milling. The resultant composite powder was subjected to calcination at various temperatures ranging from 600 °C to 800 °C. Characterizations of the composite anode were performed through X-ray diffraction (XRD), Fourier transform infrared spectroscopy, energy dispersive spectroscopy, field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), dilatometry, and porosity measurements. The composite anodes exhibited good chemical compatibility during XRD after calcination and sintering. The FTIR result verified the existence of carbonates in all the composite anodes. The increment in calcination temperature from 600 °C to 800 °C resulted in the growth of nanoscale particles, as evidenced by the FESEM micrographs and crystallite size. Nonetheless, the porosity obtained remained within the acceptable range for a good anodic reaction (20% to 40%). The TGA results showed gradual mass loss in the range of 400 °C to 600 °C (within the low-temperature solid oxide fuel cell region). The composite anodes calcined at 600 °C and 700 °C revealed a good thermal expansion coefficient that matches that of the SDCC electrolyte.     

Environmentally benign sol–gel derived nanocrystalline rod shaped calcium doped cerium phosphate yellow-green pigment

Nanocrystalline rod shaped calcium doped cerium phosphate yellow-green pigment particles having an average length of ~100 nm and aspect ratio 10 even after calcination at 600 °C have been realized through an aqueous sol–gel process. The morphology, particle size and identification of the phase are determined by using different analytical tools such as transmission electron microscopy (TEM), photon correlation spectroscopy (PCS), Fourier-transform IR (FTIR) and X-ray diffraction (XRD). Brunauer–Emmett–Teller (BET) nitrogen adsorption analysis showed the pigment particles are mesoporous texture having specific surface area 42 m² g^?1 and average pore size 153 Å. Thermogravimetric (TG) analysis is used to explain the thermal phase stability of the pigment. UV–Visible spectroscopy and colorimetric analysis are also done. The typical yellow-green color has been obtained even after heating to as low as 600 °C, which is 300 °C lesser than reported. Systematic study on synthesis and effect of temperature on color are presented.     

Synthesis and characterization of new coordination polymer with <Emphasis Type="SmallCaps">l</Emphasis>-proline amino acid ligand; new precursor for preparation of pure phase lead(II) oxide nanoparticles via thermal decomposition

A new two-dimensional lead(II) coordination polymer, [Pb(Pro)₂] _n (1); Pro = l-proline amino acid, has been synthesized and characterized by IR and X-ray diffraction. Structural determination of compound 1 reveals the Pb(II) ion is four-coordinated, bonded to two nitrogen atoms and two oxygen atoms from the l-proline ligand. PbO nanoparticles were synthesized by calcination of compound 1 at 500, 550 and 600 °C under air atmosphere. The PbO nanostructure was characterized by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). The thermal stability of compound 1 was studied by thermal gravimetric analysis (TGA) and differential thermal analysis (DTA). Increase in calcination temperature decreased particles size and also led to layer-shape nanostructures morphology.     

Fabrication and characterization of NiTiO3 nanofibers by sol–gel assisted electrospinning

Continuous NiTiO₃ nanofibers have been successfully synthesized by a sol–gel assisted electrospinning method followed by calcination at 600 °C in air. These nanofibers were characterized for the morphological, structural and optical properties by scanning electron microscopy (SEM), energy-dispersive X-ray spectrum (EDS), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and UV–visible (UV–vis) diffuse reflectance spectroscopy (DRS). SEM results reveal that the obtained NiTiO₃ nanofibers are 175 nm in diameter and several micrometers in length after annealing at 600 °C. The XRD analysis shows that the nanofibers possess highly crystalline structure with no impurity phase. In contrast, the NiTiO₃ nanoparticles synthesized at the identical conditions by a sol–gel route have impurities including TiO₂ and NiO. Moreover, the electrospun NiTiO₃ nanofibers are endowed with an obvious optical absorbance in the visible range, demonstrating they have visible light photoresponse.     

Rapid calcination of ferrite Ni0.75Zn0.25Fe2O4 by microwave energy

Ferrites Ni_0.75Zn_0.25Fe₂O₄ were obtained by polymeric precursor method and calcined in a short time with microwave energy to assess the morphological and microstructural characteristics. Samples were calcined at 500, 650, 800, and 950 °C for 30 min in a microwave oven. The resulting powders were characterized by thermal analysis (TG/DSC), X-ray diffraction (XRD), Fourier transform infrared spectrometer, field-emission gun scanning electron microscope (FEG-SEM), and energy-dispersive X-ray spectroscopy. The XRD results showed the formation of single ferrite phase at temperature of 500 °C for 30 min. The FEG-SEM analysis showed agglomerated particles with formation of non-dense longitudinal plates, with interparticle porosity and agglomerated fine particles. The rapid calcination by microwave energy demonstrated satisfactory results in relatively low temperature of 500 °C for 30 min and appeared to be a promising technique for obtaining nickel–zinc ferrite powders.     

Thermal study of clay ceramic pastes containing sugarcane bagasse ash waste

This study focuses on the thermal and mineralogical transformations of clay ceramic pastes. The pastes contain different amounts of sugarcane bagasse ash waste. Thermal and mineralogical changes occurring during firing were characterized by differential thermal analysis, thermogravimetry analysis (TG), X-ray diffraction (XRD), and scanning electron microscopy. On heating three endothermic events within the 73.5–75.7, 276.9–283.5, and 567.1–573.5 °C temperature ranges were identified. The endothermic valleys could be mainly interpreted as the release of physically adsorbed water, dehydration of hydroxides, and dehydroxylation of kaolinite, respectively. Two exothermic events within the 618.9–690.1 and 948 °C temperature ranges were identified. The exothermic peaks are associated with the decomposition of organic compounds and crystallization of mullite from metakaolinite, respectively. TG results indicate that the clay ceramic pastes had a total mass loss in the 13.1–13.6 % range, and are dependent on the sugarcane bagasse ash waste amount added. It was found that the replacement of natural clay with sugarcane bagasse ash waste, in the range up to 20 wt%, influenced the thermal behavior and technological properties of the clay ceramic pastes. In addition, the thermal analysis results agree well with the XRD.     

Boron-doped TiO2: Characteristics and photoactivity under visible light

Boron-doped TiO₂ was prepared by the sol-gel method and by grinding TiO₂ powder with a boron compounds (boric acid and boric acid triethyl ester followed by calcinations at temperature range 200 to 600°C. Three types of pristine TiO₂: ST-01 (Ishihara Sangyo Ltd., Japan; 300 m²/g), P25 (Degussa, Germany, 50 m²/g), A11 (Police S.A., Poland 12 m²/g) were used in grinding procedure. The photocatalytic activity of obtained powders in visible light was estimated by measuring the decomposition rate of phenol (0.21 mmol/dm³) in an aqueous solution. The photocatalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron emission spectroscopy (XPS), UV-VIS absorption and BET surface area measurements. The best photoactivity under visible light was observed for B-TiO₂ modified with 2 wt% of boron prepared by grinding ST-01 with dopant followed by calcinations at 400°C. This photocatalyst contains 16.9 at.% of carbon and 6.6 at.% of boron in surface layer and its surface area is 192 m²/g.     

Effect of ultrasound on the thermal behavior of the mixtures for the LTA zeolite synthesis based on metakaolin

The effect of ultrasonic treatment on the thermal behavior of the mixtures from metakaolin, sodium hydroxide and alumina designed for LTA zeolites synthesis was studied. X-ray diffraction analysis, infrared spectroscopy, scanning electron microscopy and synchronous thermal analysis have been used. It was shown that after evaporation of the suspension, LTA zeolite (24 mass%) is contained in the samples. It was established that the new phase (sodium aluminum silicate) is formed at a calcination temperature of about 600 °C. It was demonstrated that at a calcination temperature over 800 °C, nepheline is synthesized. The reaction of nepheline formation has been described by the topochemical equation of four-dimensional nucleation/nucleus growth according to Avrami/Erofeev. Using the Ozawa–Flynn–Wall analysis for non-isothermal data, the values of the activation energy and the pre-exponential factor have been calculated. It is shown that after the ultrasonic treatment the activation energy of the nepheline synthesis reaction has smaller values than in the sample without pretreatment. These phenomena have been explained by differences between the structural parameters of the particles (dimension of the coherent scattering region, the value of microdeformations).     

Surfactant-free thermal decomposition route to phase pure tricobalt tetraoxide nanoparticles from cobalt(II)-tartrate complex

Tricobalt tetraoxide nanoparticles have been successfully synthesized following a ‘bottom-up’ approach by surfactant-free thermal decomposition of cobalt(II)-tartrate complex obtained by a modified sol–gel route. The synthesized complex was characterized by Fourier transform infrared (FT-IR) spectroscopy, elemental and thermogravimetric-differential thermal analysis (TG–DTA). The nanoparticles were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and Raman studies. The powder XRD pattern furnished evidence for a face-centered cubic structure of Co₃O₄. With the rise in calcination temperature from 400 through 500 to 600 °C, the average crystallite sizes of Co₃O₄ were found to increase from 28 through 36 to 46 nm. The TEM image revealed a faceted morphology of the as-synthesized Co₃O₄ nanoparticles. The high-resolution TEM image indicated the interplanar separation to be 0.28 nm which corresponds to the (220) plane in face-centered cubic Co₃O₄. The electron diffraction (ED) pattern showed single-crystalline nature of the synthesized nanoparticles. Raman spectrum showed four characteristic peaks of Co₃O₄ which further confirmed the phasic purity of the material.     

Effect of the thermal treatment conditions on the formation of zinc ferrite nanocomposite, ZnFe2O4, by sol–gel method

Zinc ferrite nanocomposite was synthesized via thermal decomposition of zinc acetate and iron nitrate at three different temperatures (350, 450, and 550 °C). The influence of the thermal decomposition of precursors on the formation zinc ferrites was studied by differential thermal gravimetry and thermogravimetry (TG). The TG curve shows two steps for the thermal decomposition with mass loss of 17.3 % at 78 °C and 63.3 % at 315 °C. The prepared zinc ferrites nanocomposite was characterized by X-ray diffraction and scanning electron microscopy. The X-ray diffractograms of ZnFe₂O₄ shows that a crystalline phase, spinel system is formed. SEM micrograph of the zinc ferrite nanocomposite indicates the formation of uniformly spherical 48-nm nanograins. The properties of the zinc ferrite phase were strongly dependent on their calcinations temperature and molar ratio of precursors.     

Synthesis of TiO2 (B) and High‐temperature Stable Anatase TiO2 Nanowires by Hydrothermal Method and Investigation of Photocatalytic Activity

In this study, TiO₂ nanowires (TNWs) were synthesized through hydrothermal method and were characterized using X‐Ray diffraction (XRD), transmission electron microscopy (TEM) and BET techniques. Monoclinic TiO₂ (B) is the dominant phase of TNWs up to 600°C which is completely transformed into a highly crystalline anatase phase at 800°C. The photocatalytic activity of TNWs, prepared at various calcination temperatures, was investigated in the removal of Rhodamine B as an organic model pollutant. The results indicated that the photocatalytic activity of TNWs, prepared at 800°C calcination temperature, was better than that of other samples and even TiO₂–P25 nanoparticles.     

Synthesis and characterization of zinc titanate fibers by sol-electrospinning method

A facile and economic electrospinning approach has been developed for the synthesis of zinc titanate-rutile composite fibers as a nanofibrous mat at the first time. The composite fibers with different morphologies were obtained by calcination of the PVP/Ti(OC₄H₉)₄–Zn(CH₃COO)₂ fibers. The reaction mechanism was characterized by thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffractometer (XRD), field emission scanning electron microscopy (FE-SEM) and Fourier transform infraction spectroscopy (FT-IR) spectra techniques. According to the thermal analysis, the phase of ZnTiO₃ occurred at 450 °C and it decomposed at 885 °C. FE-SEM micrographs indicated that the as-spun fibers were round and had a rather uniform and smooth surface with the diameters in the range of 300–800 nm over its length. Its morphology is greatly affected by the calcination temperatures.     

Preparation and Ethanol Sensing Properties of ZnO Nanofibers

ZnO nanofibers with an average diameter of about 90 nm were prepared by an electrospinning method combined with a calcination process. The as-electrospun nanofibers before and after calcination were characterized by means of differential thermal analysis(DTA), thermal gravimetric analysis(TGA), X-ray diffraction(XRD) and scanning electron microscopy(SEM). The fibers after calcination at 600 °C belong to the hexagonal wurtzite structure. The sensor based on ZnO nanofibers exhibited excellent ethanol sensing properties at 206 °C such as good linear dependence in the low concentration(1―100 μL/L), high response, and good selectivity. Fast response(less than 2 s) and recovery(about 16 s) were also observed in our investigations.     

Crystallization study of SrSnO3:Fe

Alkaline earth stannates have recently become important materials in ceramic technology due to its application as humidity sensor. In this work, alkaline earth stannates doped with Fe³⁺ were synthesized by the polymeric precursor method, with calcination at 300 °C/7 h and between 400 and 1100 °C/4 h. The powder precursors were characterized by TG/DTA after partial elimination of carbon. Characterization after the second calcination step was done by X-ray diffraction, infrared spectroscopy, and UV?Cvis spectroscopy. Results confirmed the formation of the SrSnO₃:Fe with orthorhombic perovskite structure, besides SrCO₃ as secondary phase. Crystallization occurred at 600 °C, being much lower than the crystallization temperature of perovskites synthesized by solid state reaction. The analysis of TG curves indicated that the phase crystallization was preceded by two thermal decomposition steps. Carbonate elimination occurred at two different temperatures, around 800 °C and above 1000 °C.     

Spectroscopic characterization of porous nanohydroxyapatite synthesized by a novel amino acid soft solution freezing method

In this paper, we have reported a novel method to synthesize nanoporous hydroxyapatite (HAP) powders by freezing organic–inorganic soft solutions. The formation of porous and crystalline HAP nanopowder was achieved via calcining the samples at 600 °C followed by sintering at temperatures ranging from 900 °C to 1100 °C. The samples were analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopic (SEM) techniques. The results showed the formation of a carbon free nanoporous hydroxyapatite powders due to the decomposition of organic template enclosing the precipitated HAP. It was also observed that the rapid grain growth with retainment of pores while the crystallinity of the HAP nanopowder increased with the increase in sintering temperature which is substantiated from the XRD and SEM results. Such organized porous materials can act as a better biomaterial for bone tissue engineering.     

镧、锰掺杂改性CeO2-ZrO2-Al2O3固溶体的性能

采用共沉淀法制备了一系列La, Mn共掺杂的CeO2-ZrO2-A12O3(CZA)复合氧化物, 采用BET, XRD, H2-TPR, XPS和XRF等方法对样品进行表征. 结果表明, 全部样品均形成了稳定的CZA固溶体, 经600 ℃焙烧后表现出良好的织构性能, 1000 ℃老化后, La, Mn共掺杂样品具有最佳的高温稳定性; H2-TPR测试表明, La, Mn之间存在正协同效应, 共掺杂的样品具有最佳的低温还原性能和高温稳定性; XPS结果表明, 掺杂La可有效抑制在焙烧过程中Mn向表面的迁移, 从而保持较高的表面吸附氧浓度.     

Direct formation of thermally stabilized amorphous mesoporous Fe2O3/SiO2 nanocomposites by hydrolysis of aqueous iron III nitrate in sols of spherical silica particles

Nanocomposite materials containing 10% and 20% iron oxide/silica, Fe2O3/SiO2 (w/w), were prepared by direct hydrolysis of aqueous iron III nitrate solution in sols of freshly prepared spherical silica particles (St?ber particles) present in their mother liquors. This was followed by aging, drying, calcination up to 600 degrees C through two different ramp rates, and then isothermal calcinations at 600 degrees C for 3 h. The calcined and the uncalcined (dried at 120 degrees C) composites were characterized by thermogravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction (XRD), N2 adsorption/desorption techniques, and scanning electron microscopy as required. XRD patterns of the calcined composites showed no line broadening at any d-spacing positions of iron oxide phases, thereby reflecting the amorphous nature of Fe2O3 in the composite. The calcined composites showed nitrogen adsorption isotherms characterizing type IV isotherms with high surface area. Moreover, surface area increased with the increasing of the iron oxide ratio and lowering of the calcination ramp rate. Results indicated that iron oxide particles were dispersed on the exterior of silica particles as isolated and/or aggregated nanoparticles. The formation of the title composite was discussed in terms of the hydrolysis and condensation mechanisms of the inorganic FeIII precursor in the silica sols. Thereby, fast nucleation and limited growth of hydrous iron oxide led to the formation of nanoparticles that spread interactively on the hydroxylated surface of spherical silica particles. Therefore, a nanostructured composite of amorphous nanoparticles of iron oxide (as a shell) spreading on the surface of silica particles (as a core) was formed. This morphology limited the aggregation of Fe2O3 nanoparticles, prevented silica particle coalescence at high temperatures, and enhanced thermal stability.