High-efficiency electroluminescent polymers with stable high work function metal Al and Au as cathode

Soluble conjugated copolymers (PFN-TPA) derived from 2,1,3-benzothiadiazole (BTDZ), triphenylamine (TPA) and 9,9-bis(3′-(N,N-dimethylamino)propyl)fluorene (DMAPF) were synthesized by palladium(0)-catalyzed Suzuki coupling reactions. Optoelectronic properties of the copolymers were characterized by UV-vis absorption, cyclic voltammetry, photoluminescence and electroluminescence. All these copolymers show excellent EL performances in the devices with Ba/Al, Al and even Au as cathode and are promising candidate for fabrication and patterning of air-stable flat panel displays.     

Synthesis and optical and electroluminescent properties of novel conjugated polyelectrolytes and their neutral precursors derived from fluorene and benzoselenadiazole

Novel copolymers derived from amino‐functionalized fluorene‐ and selenium‐containing heterocycles [2,1,3‐benzoselenadiazole (BSeD)] were synthesized by the palladium‐catalyzed Suzuki coupling method. Their quaternized salt polyelectrolytes of corresponding compositions were obtained by a postpolymerization treatment. The resulting copolymers were soluble in polar solvents. An efficient energy transfer due to exciton trapping on the BSeD sites was observed. Devices from such copolymers emitted orange‐red light peaked at 560–610 nm. All the polymers showed good device performance with high‐work‐function metal Al as a cathode without the use of an additional electron‐injection layer and are promising candidates for polymer light‐emitting diode applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2521–2532, 2006     

Tervalent conducting polymers with tailor-made work functions: preparation, characterization, and applications as cathodes in electroluminescent devices

A series of conducting polymers have been prepared through thermal polymerization of transition-metal diimine complexes. The as-polymerized material is electrochemically converted into its formally zerovalent form. Due to the proximity of the half-wave potentials of the formal 1+/0 and 0/1- couples, there is substantial disproportionation of the redox sites at room temperature, resulting in a conductive tervalent mixed-valent material. The redox processes that give rise to this mixed-valent material are predominantly ligand-based, and therefore are highly sensitive to substitution on the ligand periphery. Solution redox chemistry of the monomer can be used to accurately predict the work function of the corresponding zerovalent conducting polymer, which has been verified by ultraviolet photoelectron spectroscopy. Many of these materials have especially low work functions (<3.6 eV) making them appropriate materials to use as cathode materials in organic light-emitting devices (OLEDs). Working examples of tris(8-hydroxyquinoline)aluminum(III)-based OLEDs have been fabricated using one of these polymers as a cathode.     

Conjugated polyelectrolytes and neutral polymers with poly(2,7‐carbazole) backbone: Synthesis,characterization, and photovoltaic application

Poly(2,7‐carbazole) neutral polymers (PC‐N, PC‐NOH, and PC‐P) and polyelectrolytes (PC‐NBr and PC‐SO₃Na) with hydrophilic pendant groups of ammonium, phosphonate, and sulfonate were synthesized as interlayers for cathode modifications in bulk‐heterojunction photovoltaic cells (BHJ PVCs). The absorptions of the polymers were determined by the poly(2,7‐carbazole) backbone, showing absorption peaks at ～390 nm for their solutions and films. Because of large intermolecular interactions, excimer emissions with wavelengths higher than 500 nm were found in the photoluminescence spectra of the films of the polymers, which weakened the light emissions of the polymers. PC‐N, PC‐NBr, PC‐NOH, and PC‐P possessed comparable HOMO levels of ?5.23 eV and LUMO levels of ?2.4 eV, but HOMO and LUMO levels of PC‐SO₃Na were up‐lying to ?4.91 and ?2.12 eV, respectively. PC‐N, PC‐NBr, PC‐NOH, and PC‐P were selected to construct thin interlayers in BHJ PVCs with PFO‐DBT35:PCBM = 1:4 as the active layer. Compared with traditional Al cathode, bilayer cathodes with the interlayers showed improvements of open‐circuit voltages and short‐circuit currents of the PVCs. PC‐NOH was the best for the photovoltaic performances and over 20% increase of power conversion efficiency (PCE) was achieved. The bilayer cathodes would have great potential to further elevate PCE of BHJ PVCs with other active layer materials. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polyphosphates as inorganic polyelectrolytes interacting with oppositely charged ions,polymers and deposited on surfaces: fundamentals and applications

Polyphosphates are important but neglected polyelectrolytes that play a major role in biology and in surface science for the stabilization of colloids against flocculation and for the preservation of food. They are also known as “Calgon” ® and intensively used as additives in washing powders. This review aims to review recent developments in which linear polyphosphates are used for the design of new functional coatings using sol–gel processes and layer-by-layer deposition methods. All these methods rely on the high charge density of polyphosphates as inorganic polyelectrolytes, therefore the structure and properties of these molecules are also reviewed. New perspectives will also been given for the design of stimuli responsive coatings at the tiny frontier between biology and materials science.     

Coordination polymers of glutaraldehyde with glycine metal complexes: synthesis,spectral characterization,and their biological evaluation

Glycine metal complexes were prepared by the reaction of glycine with Mn(II), Co(II), Ni(II), Cu(II), and Zn(II) in 1?:?2 molar ratio. Thereafter their condensation polymerization was done with glutaraldehyde to obtain polymer metal complexes. All the synthesized polymer metal complexes were characterized by elemental analysis, FT-IR, ¹H-NMR, and UV-Vis spectrometry, magnetic susceptibility, and thermogravimetric studies. The analytical data of all the polymers agreed with 1?:?1 molar ratio of metal complex to glutaraldehyde and magnetic moment data suggest that PGG–Mn(II), PGG–Co(II), PGG–Ni(II), and PGG–Cu(II) have an octahedral geometry around the metal atom, whereas the tetrahedral geometry was proposed for PGG–Zn(II) polymer. The PGG–Mn(II) and PGG–Cu(II) showed octahedral geometry. Thermal behavior of the polymer metal complexes was obtained at a heating rate of 10°C?min^?1 under nitrogen atmosphere from 0°C to 800°C. The antimicrobial activities of synthesized polymers were investigated against Streptococcus aureus, Escherichia coli, Bacillus sphaericus, Salmonella sp. (Bacteria), Fusarium oryzae, Candida albicans, and Aspergillus niger (Yeast).     

Creating a pseudometallic state of K+ by intercalation into 18-crown-6 grafted on polyfluorene as electron injection layer for high performance PLEDs with oxygen- and moisture-stable Al cathode

Polymer light-emitting diodes (PLEDs) suffer from inadequate lifetimes because of the use of environmentally sensitive metals as the cathodes. We present the use of water/methanol-soluble polyfluorene grafted with 18-crown-6 chelating to K(+) as the electron-injection layer (EIL) for deep-blue-emission PLEDs, allowing the use of environmentally stable Al as the cathode since electron donation from the 18-crown-6 can reduce K(+) to a stable "pseudometallic state", enabling it to act as an intermediate step for electron injection. Furthermore, when poly(ethylene oxide) was blended into the EIL to provide hole blocking (HB), the device exhibited the highest performance reported to date for a deep-blue-emission PLED based on a conjugated polymer as the emitting layer, with a brightness of 54,800 cd/m(2) and an external quantum efficiency of 5.42%. The use of such an EI-HB layer opens a broad avenue leading toward industrialization of PLEDs.     

Allyl, methallyl, prenyl, and methylprenyl ethers as protected alcohols: their selective cleavage with diphenyldisulfone under neutral conditions

Diphenyldisulfone is a mild and efficient reagent for selective cleavage of methylprenyl (2,3-dimethylbut-2-en-1-yl), prenyl (3-methylbut-2-en1-yl), and methallyl (2-methylallyl) ethers. These reaction conditions are compatible with the presence of other protecting groups such as acetals, acetates, and allyl, benzyl, and TBDMS ethers. Exposure of 2,3-dimethylbut-2-en-1-yl and 3-methylbut-2-en1-yl ethers to diphenyldisulfone led to the formation of 2,3-dimethylbuta-1,3-diene and isoprene, respectively. 2-Methylallyl ethers undergo isomerization to 2-methylpropenyl ethers, which are easily hydrolyzed into the corresponding free alcohols and isobutyraldehyde. [reaction: see text]     

Luminescence studies in polymers—XI: Acenaphthylene polymers and copolymers with methylmethacrylate: polarization,yield and decay of the fluorescence as a function of temperature in solution

For polymers of acenaphthylene and copolymers with methylmethacrylate measurement of the polarization of the fluorescence in glassy solution at 77K has been combined with analysis of the intensity and decay of excimer and monomer fluorescence over a large temperature range. Activation energies and frequency factors corresponding to several photophysical processes have been determined and compared with those reported previously for I-vinylnaphthalene polymer and copolymers.     

Sb-Cu alloy cathode with a novel lithiation mechanism of ternary intermetallic formation: Enabling high energy density and superior rate capability of liquid metal battery

Antimony(Sb) is an attractive cathode for liquid metal batteries(LMBs) because of its high theoretical voltage and low cost.The main obstacles associated with the Sb-based cathodes are unsatisfactory energy density and poor rate-capability.Herein,we propose a novel Sb₆₄Cu₃₆ cathode that effectively tackles these issues.The Sb₆₄Cu₃₆(melting point:525℃) cathode presents a novel lithiation mechanism involving sequentially the generation of Li₂C...     

Multiple functionalities of polyfluorene grafted with metal ion-intercalated crown ether as an electron transport layer for bulk-heterojunction polymer solar cells: optical interference, hole blocking, interfacial dipole, and electron conduction

We present a novel electron transport (ET) polymer composed of polyfluorene grafted with a K(+)-intercalated crown ether involving six oxygen atoms (PFCn6:K(+)) for bulk-heterojunction polymer solar cells (PSCs) with regioregular poly(3-hexylthiophene) (P3HT) as the donor and indene-C(60) bisadduct (ICBA) or indene-[6,6]-phenyl-C(61)-butyric acid methyl ester (IPCBM) as the acceptor in the active layer and with Al or Ca/Al as the cathode. A remarkable improvement in the power conversion efficiency (PCE) (measured in air) was observed upon insertion of this ET layer, which increased the PCE from 5.78 to 7.5% for a PSC with ICBA and Ca/Al (5.53 to 6.63% with IPCBM) and from 3.87 to 6.88% for a PSC with ICBA and Al (3.06 to 6.21% with IPCBM). This ET layer provides multiple functionalities: (1) it generates an optical interference effect for redistribution of light intensity as an optical spacer; (2) it blocks electron-hole recombination at the interface with the cathode; (3) it forms an interfacial dipole that promotes the vacuum level of the cathode metal; and (4) it enhances electron conduction, as evidenced by (1) the increase in total absorption of 1:1 w/w P3HT:ICBA by a factor of 1.3; (2) the reduction in the hole-only current density profile by a factor of 3.3 at 2.0 × 10(5) V/cm; (3) the decrease of 0.81 eV in the work function of Al from 4.28 to 3.47 eV, as determined by UV photoelectron spectroscopy; and (4) the decrease in the series resistance of PSCs with ICBA and Al by a factor of 4.5, as determined by the current-voltage characteristic under dark conditions; respectively. The PSC of 7.5% is the highest among the reported values for PSC systems with the simplest donor polymer, P3HT.     

Comparative study of structure-properties relationship for novel beta-halogenated lanthanide porphyrins and their nickel and free bases precursors,as a function of number and nature of halogens atoms

The synthetic route of partially beta-halogenated via a "metal-assisted" reaction and perhalogenated terbium complexes is described. This protocol allows the facile insertion of the halogens (bromines or chlorides) to the porphyrin peripheral positions. The electronic absorption spectra and the redox potentials of the free porphyrins as well as the terbium complexes are dramatically affected as the number of halogen atoms increase. In fact, two antagonistic effects are responsible for that, the inductive and the distortion effects on the porphyrin ring. They result in a red shift for the Soret band and a stabilization/destabilization of the HOMOs/LUMOs which in turn is manifested by variations on the redox potentials. The novel crystal structure of the Ni(Cl(8)TPP) is discussed in great detail and compared with the previously reported structures of Tb(Cl(8)TPP) (OAc)(DMSO)(2) x 3PhCH(3) x MeOH and H(2)(Br(8)TPP), as well as with other perhalogenated nickel porphyrins available in the literature.     

Studies on the method of total synthesis of koumine: I. 4-Substituted 1,2-dihydropyridine derivatives and their function as a conjugated diene in Diels-Alder reaction

A route to the total synthesis of koumine has been suggested. Five 4-substituted 1, 2-d hydropyridine derivatives, which are supposed to be a conjugated diene of Diels-Alder reaction to produce the isoquinuclidine ring of koumine, have been synthesized. Only two of them were found to be able to undergo the Diels-Alder reaction. The stereochemistry of the reaction product has also been examined.     

Terpyridine‐substituted,fluorescent polymers and their chelation with zinc ion: The ligand‐to‐metal ratio and optical properties

Soluble, fluorescent, terpyridine‐substituted, conjugated polymers were prepared and characterized. The polymer chains included a defined oligo(phenylenevinylene) fragment, on which the terpyridine‐functional group was attached. The polymers were blue‐fluorescent with emission peaks at 400–427 nm in tetrahydrofuran solutions. Upon chelation with the Zn(II) cation, the emission maxima were shifted to a longer wavelength by as much as 113 to 506–526 nm. A model compound was also prepared to aid the structural characterization. The ratio of terpyridine to Zn²⁺ in the polymer complex was found to be 1:1 on the basis of spectroscopic evidence, which included mass spectrometry, ¹H NMR, and Job titration. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2338–2345, 2006     

Polyamine macrocycles incorporating a phenolic function: their synthesis,basicity, and coordination behavior toward metal cations. Crystal structure of a binuclear nickel complex

The synthesis and characterization of two new polyazamacrocycles, 1,4,7,10-tetraaza[12](2,6)phenolphane (L1) and 1,4,7,10,13-pentaaza[15](2,6)phenolphane (L2), are reported. Both ligands incorporate the 2,6-phenolic unit within the cyclic framework. The basicity behavior and the ligational properties of L1 and L2 toward Ni(II), Zn(II), and Cu(II) were determined by means of potentiometric measurements in aqueous solution (298.1 +/- 0.1 K, I = 0.15 mol dm-3). UV spectra were used to understand the role of the phenolic function in the stabilization of the cations. L1 and L2 behave as pentaprotic bases under the experimental conditions used. The UV spectra showed that the deprotonation of the phenolic function occurs at low pH values for both ligands, giving rise to the simultaneous presence of positive and (one) negative charges on the macrocycle. While L1 forms only mononuclear complexes, L2 can also form binuclear species with all the metal ions investigated. In the mononuclear species of both ligands, one nitrogen atom close to the phenol remains unbound. The UV spectra revealed that the phenol, bridging the two metal ions in phenolate form, plays an important role in the stabilization of the binuclear complexes of L2. The coordination sphere of the two metals is completed by adding a secondary ligand such as water molecules or OH-, in any case preferring substrates able to bridge the two close metal ions. These results are confirmed by the crystal structure of [Ni2(C16H28ON5)(H2O)2Cl2]Cl.H2O.CH3OH (space group P21/a, a = 14.821(5) A, b = 10.270(4) A, c = 17.663(6) A, beta = 108.87(3) degrees, V = 2544(2) A3, Z = 4, R1 = 0.0973, wR2 = 0.2136). This structure displays a Ni(II) binuclear complex of L2 in which the phenolic oxygen and a chlorine ion bridge the two close Ni(II) ions.     

Luminescence studies in polymers—VIII Poly-1-vinylnaphthalene and its copolymers with methylmethacrylate: Flourescence yield and life-time as a function of temperature in solution

Combining the measurement of fluorescence yield and decay-time as a function of temperature, the activation energies and frequency factors corresponding to several photophysical processes have been determined for solutions of poly-1-vinylnaphthalene and its copolymers with methylmethacrylate. The results are discussed in relation to copolymer composition and compared with those reported in the literature for model compounds. Excimer dissociation is found to be unimportant in the polymeric systems. This is tentatively assigned to a lower value of the frequency factor corresponding to excimer dissociation.     

First metal azide complex with isonicotinate as a bridging ligand showing new net topology: hydrothermal synthesis, structure, and magnetic properties

A new 3D azido-bridged coordination polymer, [Co1.5(N3)(OH)(Isonic)]n (1), has been synthesized and characterized and its magnetic properties studied. Isonicotinate acts as a bridging coligand in this complex. In 1, all of the ligands take tridentate bridging coordination modes, and the overall structure of 1 exhibits a new 3,6-connected net topology.     

Pyrido[1,2-a][1,2,4]triazol-3-ylidenes as a new family of stable annulated N-heterocyclic carbenes: synthesis, reactivity, and their application in coordination chemistry and organocatalysis

General synthetic avenues to the pyrido-annulated triazolium salts with different steric and electronic properties have been developed. This architecture can be readily altered with different N-alkyl or aryl substituents at the N2 position of the triazole ring and modifications to the pyridine backbone. Deprotonation of the triazolium salts 12 with NaH led to formation of stable carbenes 11 at room temperature as clearly demonstrated through ESI mass spectra and by observation of the characteristic (13)C NMR resonance for the carbene carbon at delta = 202-208 ppm. In sharp contrast, treatment of these triazolium salts with K2CO3 led to dimerization of free carbenes 11. The dimeric enetetramine (11b)2 could react with elemental sulfur to deliver the corresponding thiourea 16 in toluene at 80 degrees C in good yield. A silver complex with the pyrido[1,2-a][1,2,4]triazol-3-ylidene is described, and the molecular structure of complex 17 was established by X-ray crystallography. The triazolium salts 12 turned out to be powerful catalysts in catalytic benzoin condensations and transesterifications at 25 degrees C. The catalytic activity was largely dependent on the steric and electronic nature of the R(1) and R(2) substituents of the triazolium salt. We rationalized that this type of triazolium-catalyzed benzoin condensations should undergo the "traditional" Breslow mechanism rather than the pathway of the dimer (11)2 as the real catalytic species.     

A thermally stable Pt/Y-based metal-organic framework: Exploring the accessibility of the metal centers with spectroscopic methods using H2O, CH3OH, and CH3CN as probes

A metal-organic framework (MOF) based on Pt, Y, and 2,2'-bipyridine-5,5'-dicarboxylate (BPDC), stable up to 400 degrees C, has been synthesized and characterized. In this MOF, the Pt centers are coordinated to Cl and the N atoms of the BPDC unit, giving a local environment similar to that found in a series of Pt-organic complexes with catalytic activity toward C-H bond cleavage of alkanes. This new material is a heterogeneous counterpart to the corresponding metal-organic complex. The structure, determined by single-crystal XRD data, is the repetition of three covalently bonded layers. These layers form a block, which is stacking as an (a)(b)(c) sequence along the crystallographic b-axis. Each layer contains the Pt-organic unit, while Y atoms represent the connection between adjacent layers. No covalent connection is present between layer (a) of a block and layer (c) of an adjacent block. EXAFS (BM29 at the ESRF) analysis supports the XRD data. As this MOF crystallizes under hydrothermal conditions, water acts both as solvent and as a direct ligand of Y. Accessibility to the metal centers is demonstrated by reversible water desorption/readsorption, as determined by TPA/TPD, FTIR, UV-vis, EXAFS, and XANES. Importantly, the results show that the as-synthesized material will not suffer a permanent loss in porosity upon solvent removal. In addition to water, methanol, ethanol, and acetonitrile can also access the internal void of the dehydrated phase.     

Coordination compounds with XeF2, AsF3 and HF as ligands to metal ions: a review of reaction systematics, Raman spectra and metal, fluoro-ligand polyhedra

The reactions between Ln(AsF₆)₃ (Ln: lanthanide) and excess of XeF₂ in anhydrous HF (aHF) as a solvent yield coordination compounds [Ln(XeF₂)₃](AsF₆)₃ or LnF₃ together with Xe₂F₃AsF₆ or mixtures of all mentioned products depending on the fluorobasicity of XeF₂ and LnF₃ along the series. XeF₂ in a basic aHF is able to oxidize Pr³⁺ to Pr⁴⁺ besides Ce³⁺ to Ce⁴⁺ and Tb³⁺ to Tb⁴⁺. The tetrafluorides obtained are weaker fluorobases as XeF₂ and are immediately exchanged with XeF₂ yielding Xe₂F₃AsF₆ and LnF₄. The analogous reaction between Ln(BiF₆)₃ and XeF₂ in aHF yields [Ln(XeF₂)₃](BiF₆)₃, Ln: La, Nd. Raman spectra of the compounds [Ln(XeF₂)_n](AF₆)₃ (A: As, Bi) show that no XeF⁺ salts are formed. The interaction of XeF₂ with metal ion is covalent over the fluorine bridge. Analogous reactions of Ln(AsF₆)₃ with AsF₃ in aHF yield [Ln(AsF₃)₃](AsF₆)₃ which are stable in a dynamic vacuum at temperatures lower than 233 K. In reactions between M(AF₆)₂ (M: alkaline earth metal and Pb, A: As, Sb) and XeF₂ in aHF as a solvent, compounds of the type [M(XeF₂)_n](AF₆)₂ were synthesized. Analogous reactions with AsF₃ yield coordination compounds of the type [M(AsF₃)_n](AsF₆)₂. During the preparation of M^x(AsF₆)_x (M: metal in oxidation state x+) by the reaction between metal fluoride and excess of AsF₅ in aHF it was found that HF could also act as a ligand to the metal ions (e.g. Ca(HF)(AsF₆)₂).