聚（2-乙基-2-噁唑啉）-聚乳酸胶束的血液相容性和细胞相容性研究

合成的二嵌段共聚物聚（2-乙基-2-噁唑啉）-聚乳酸（PEOz-PLA）可自组装形成胶束,其在药物输送领域的应用与口俱增。然而,其与血液和细胞之间的相互作用迄今未知。本研究拟对PEOz-PLA胶束的血液相容性和细胞相容性进行评价,为PEOz-PLA胶束的潜在应用提供数据支持。通过溶血、凝血时间、血小板激活以及与白蛋白的相互作用评价了PEOz-PLA胶束的血液相容性。结果表明,PEOz-PLA胶束的血液相容性良好。SRB的实验结果表明,PEOz-PLA胶束与KBv细胞孵育后并未出现明显的细胞毒性,显示出良好的细胞相容性。总之,PEOz-PLA胶束是血液和细胞相容的药物载体,可用于静脉给药。     

Folate-modified poly(2-ethyl-2-oxazoline) as hydrophilic corona in polymeric micelles for enhanced intracellular doxorubicin delivery

The transmembrane transport of drug loaded micelles to intracellular compartment is quite crucial for efficient drug delivery. In the current study, we investigated the cellular internalization and anticancer activity of doxorubicin loaded micelles with folate modified stealthy PEOz corona. Folate-decorated micelles incorporating doxorubicin were characterized for particle size, degree of folate decoration, drug loading content and encapsulation efficiency, morphology, and surface charge. The targeting capability and cell viability were assessed using HeLa, KB, A549 and MCF-7/ADR cell lines. In vitro study clearly illustrated the folate receptor (FR) mediated targeting of FA modified micelles to FR-positive human HeLa, KB and MCF-7/ADR cells, while specific delivery to FR-negative A549 cells was not apparently increased at the same experimental conditions. Cytotoxicity assay showed 60% and 58% decrease in IC₅₀ values for HeLa and KB cells, while only a slight decrease for A549 cells, following treatment with folate modified formulations. The enhanced intracellular delivery of FA modified micelles in MCF-7/ADR cells was also observed. In vivo antitumor tests revealed DOX entrapped FA-PEOz-PCL micelles effectively inhibited the tumor growth and reduced the toxicity to mice compared with free DOX. The current study showed that the targeted nano-vector improved cytotoxicity of DOX and suggested that this novel PEOz endowed stealthy micelle system held great promise in tumor targeted therapy.     

pH敏感聚(2-乙基-2-噁唑啉)-壳聚糖-阿霉素共聚物胶束的制备及性质考察

目的合成pH敏感两亲性接枝共聚物聚(2-乙基-2-噁唑啉)-壳聚糖-阿霉素(PEOz-g-CS-HyzDOX),采用透析法制备阿霉素pH敏感两亲性共聚物胶束并对其相关的制剂学性质、细胞抑制及细胞摄取行为进行考察。方法分别利用透射电镜(TEM)、动态光散射法(DLS)和zeta电位分析仪对胶束的形态、粒径和表面电位进行表征;采用透析法考察载药聚合物胶束的体外释放行为;采用MTT法考察聚合物胶束的细胞抑制作用。结果反应产物使用红外及核磁表征,确定为目标产物;PEOz-g-CS-Hyz-DOX聚合物胶束载药量为4.2%。采用透析法制备的载阿霉素聚(2-乙基-2-噁唑啉)-壳聚糖丁二酸单甲酯胶束(PEOz-g-CSMS/DOX)载药量可达5.62%,包封率为59.35%;两种胶束的粒径均较小且粒径分布很窄,胶束粒子为类球形且分散良好;两种胶束释药行为体现pH敏感性;PEOz-g-CS-Hyz-DOX聚合物胶束体外细胞毒作用及细胞摄取均优于PEOz-g-CSMS/DOX胶束和阿霉素溶液。结论以壳聚糖为载体的化学腙键释药胶束作为抗肿瘤药物的药物传递系统具有可行性及良好的应用前景。     

Preparation and in vitro characterization of paclitaxel-loaded pH-responsive polymeric micelles based on poly(2-ethyl-2-oxazoline)-vitamin E succinate

To ensure the delivery of antitumor drugs to tumor site and quick release in tumor cells, we designed and prepared pH-sensitive polymeric micelles by combining cationic ring-opening polymerization of 2-ethyl-2-oxazoline (EOz) with vitamin Esuccinate (VES), and then encapsulating paclitaxel (PTX) into the micelles self-assembled by poly(2-ethyl-2-oxazoline)-vitamin E succinate (PEOz-VES). The structure of the synthesized PEOz-VES was confirmed by ¹H NMR spectrum, and the molecular weight measured by GPC was 1212 g/mol. The pK_a of PEOz-VES with a low critical micelle concentration of (5.84±0.02) mg/L was determined to be 6.01. The PTX-loaded PEOz-VES polymeric micelles prepared by film hydration method were characterized to have a nanoscaled size of about 30 nm in diameter, a positive Zeta potential of 4.86 mV and uniform spherical morphology by TEM observation. The drug loading content and encapsulation efficiency were (2.63±0.16)% and (84.1±3.38)%, respectively. The in vitro release behavior of PTX from PEOz-VES micelles in PBS displayed pH-dependent pattern and was gradually accelerated with decrease of pH value, implying that the micelles could distinguish endo/lysosomal pH and tumor extracellular pH from physiological pH by accelerating drug release. Therefore, the designed PEOz-VES micelles might have significant promise for anti-cancer drug delivery.     

Spontaneously self-assembled micelles from poly(ethylene glycol)-b-poly(epsilon-caprolactone-co-trimethylene carbonate) for drug solubilization

Di-block copolymers composed of polyethylene glycol (PEG) and a second block of (co)polyesters of epsilon-caprolactone (CL) and/or trimethylene carbonate (TMC) were synthesized and characterized. Tin octoate was used as catalyst and polymerization were completed over a period of 24 h with high conversion (> 95%). Self-assembling properties in water were evaluated. All di-block copolymers behave similarly except when PCL served as the second block. Stable crew-cut micelles of about 20 nm were obtained by direct dissolution of the liquid di-block copolymers in water at room temperature. When PCL was present as the second block, no solubilization occurred. Drug encapsulation of poorly water-soluble drugs belonging to biopharmaceutics classification system (BCS) class II (ketoprofen and furosemide) was evaluated. Experimental solubility for these two drugs shows a significant enhancement such that a maximum value of 23.4 mg/ml was obtained for ketoprofen in a 10% w/v micellar solution as compared to 0.14 mg in water. In the case of furosemide, the solubility increased from 0.04 mg/ml in water to about 3.2 mg/ml in a 10% w/v micellar solution. Enzymatic degradation of diblock copolymers was also studied in the presence of Pseudomonas lipase in a phosphate buffer solution (pH 7.4). Results indicated rapid degradation of copolymers containing relatively higher amounts of CL compared to TMC suggesting the potential in vivo degradation.     

Novel polymeric micelles for hydrophobic drug delivery based on biodegradable poly(hexyl-substituted lactides)

Novel amphiphilic methoxy-poly(ethylene glycol)-poly(hexyl-substituted lactides) block copolymers were synthesized by ring-opening polymerization (ROP) of mono and dihexyl-substituted lactide (mHLA and diHLA) in bulk at 100 degrees C in the presence of tin(II) 2-ethylhexanoate (Sn(Oct)(2)) as catalyst and methoxy-poly(ethylene glycol) (MPEG) as initiator. MPEG-PmHLA and MPEG-PdiHLA copolymers of predictable molecular weights and narrow polydispersities were obtained, as shown by (1)H NMR and GPC. DSC experiments showed that the MPEG-PHLA block-copolymer presents a bulk microstructure containing MPEG domains segregated from the PHLA domains. Micelles were successfully prepared from these block copolymers, with sizes ranging from 30 to 80 nm. The critical micellar concentration (CMC) was found to decrease with the increasing number of hexyl groups on the polyester block (MPEG-PLA > MPEG-PmHLA > MPEG-PdiHLA) for copolymers of the same composition and molecular weight. The hydrophobicity of the micelle core in dependence of the number of hexyl groups along the PLA chain was evidenced by absorbance experiments with the incorporation of the dye Nile Red. These novel amphiphilic copolymers are interesting for micellar drug delivery and especially in regard to optimized hydrophobic drug loadings, as it was shown for griseofulvin as a model drug.     

New self-nanoemulsifying drug delivery system (SNEDDS) with amphiphilic diblock copolymer methoxy poly (ethylene glycol)-block-poly (ϵ-caprolactone)

The objective of the study is to prepare a new self-nanoemulsifying drug delivery system (SNEDDS) with amphiphilic diblock copolymers methoxy poly (ethylene glycol)-block-poly (?-caprolactone) (MPEG-b-PCL) and to investigate the effect of MPEG-b-PCL on the characteristics of SNEDDS. MPEG-b-PCL was synthesized and characterized by ¹H-NMR, IR and GPC. Various ratios of MPEG-b-PCL copolymers and Tween 80 were used as emulsifier to prepare the new SNEDDS. SNEDDS with high oil and low surfactant content forms a semi-solid gel at room temperature, which could be effectively sealed in soft or hard capsules. The mean droplet size of SNEDDS-generated nanoemulsions significantly decreased after the addition of diblock polymer and increased with increase of PCL chain in MPEG-b-PCL. The drug Coenzyme Q₁₀ (CoQ₁₀) was chosen as the model compound in this study due to its insolubility in water. CoQ₁₀ from SNEDDS was rapidly dissolved regardless of the fluid condition.     

Block copolymer micelles as a solution for drug delivery problems

Micelles, nanosized colloidal particles with a hydrophobic core and hydrophilic shell, can be successfully used for the solubilisation of various poorly soluble pharmaceuticals, and demonstrate a series of attractive properties as drug carriers. Polymeric micelles, such as micelles formed by amphiphilic block copolymers, are of a special interest as they possess high stability both invitro and invivo, and good biocompatibility. Drug-loaded micelles can spontaneously accumulate in body areas with compromised vasculature (tumours, infarcts) via the enhanced permeability and retention (EPR) effect. Micelles made of stimuli-responsive (pH- or temperature-sensitive) amphiphilic block copolymers can release their contents in pathological areas demonstrating hyperthermia or acidosis. Various specific targeting ligand molecules, such as antibodies, can be attached to the micelle surface and bring drug-loaded micelles to, and into, target cells (cancer cells being a primary target). Micelles carrying various reporter (contrast) groups may become the imaging agents of choice in different imaging modalities. This review will consider some recent trends in using micelles as pharmaceutical carriers.     

Amphiphilic poly(hydroxyethylaspartamide) derivative-based micelles as drug delivery systems for ferulic acid

Self-assembling micelles, potentially useful as drug delivery systems for ferulic acid (FA), were obtained in aqueous media from amphiphilic α,β-poly(N-2-hydroxyethyl)-dl-aspartamide (PHEA) copolymers bearing at the polyamino acidic backbone both poly(ethyleneglycol) (2000 or 5000 Da) and hexadecylamine (C₁₆) moieties, at a concentration of 7 × 10^{? 3} and 4 × 10^{? 3} g/l, respectively, with nanometre size and negative zeta potential. These micelles were able to entrap FA and to release it in a prolonged way in phosphate buffer solution at pH 7.4 and human plasma. These systems were also stable in storage conditions and have no cytotoxic effects on Caco-2, 16 HBE, HuDe and K562 cell lines. Moreover, PHEA–PEG₂₀₀₀–C₁₆ and PHEA–PEG₅₀₀₀–C₁₆ micelles were able to escape from phagocytosis by murine macrophages as a function of the surface PEGylation.     

Polymeric micelles based on poly(methacrylic acid) block-containing copolymers with different membrane destabilizing properties for cellular drug delivery

Poly(methacrylic acid)-b-poly(ethylene oxide) are double hydrophilic block copolymers, which are able to form micelles by complexation with a counter-polycation, such as poly-l-lysine. A study was carried out on the ability of the copolymers to interact with model membranes as a function of their molecular weights and as a function of pH. Different behaviors were observed: high molecular weight copolymers respect the membrane integrity, whereas low molecular weight copolymers with a well-chosen asymmetry degree can induce a membrane alteration. Hence by choosing the appropriate molecular weight, micelles with distinct membrane interaction behaviors can be obtained leading to different intracellular traffics with or without endosomal escape, making them interesting tools for cell engineering. Especially micelles constituted of low molecular weight copolymers could exhibit the endosomal escape property, which opens vast therapeutic applications. Moreover micelles possess a homogeneous nanometric size and show variable properties of disassembly at acidic pH, of stability in physiological conditions, and finally of cyto-tolerance.     

Cholesterol-conjugated poly(D,L-lactide)-based micelles as a nanocarrier system for effective delivery of curcumin in cancer therapy

Polymeric micelles have been widely explored preclinically as suitable delivery systems for poorly soluble chemotherapeutic drugs in cancer therapy. The present study reported the development of cholesterol (Ch)-conjugated poly(D,L-Lactide) (PLA)-based polymeric micelles (mPEG–PLA-Ch) for effective encapsulation and delivery of curcumin (CUR) at the tumor site. Cholesterol conjugation dramatically affected the particle size and improved drug loading (DL) and encapsulation efficiency (EE). mPEG–PLA-Ch-CUR showed bigger hydrodynamic diameter (104.6?±?2.1?nm, and 169.3?±?1.52?nm for mPEG–PLA and mPEG–PLA-Ch, respectively) due to increased size of the hydrophobic core. The newly developed polymer exhibited low critical micelles concentration (CMC) (25?μg/mL) which is close to lipid-based polymer, PEG-phosphatidyl ethanolamine (12.5?μg/mL) compared to mPEG–PLA (50?μg/mL). mPEG–PLA-Ch micelles exhibited relatively higher EE (93.74?±?1.6%) and DL (11.86?±?0.8%) compared to mPEG–PLA micelles (EE 91.89?±?1.2% and DL 11.06?±?0.8%). mPEG–PLA-Ch micelles were internalized by the cancer cells effectively and exhibited higher cytotoxicity compared to free CUR in both, murine melanoma (B16F10) and human breast cancer (MDA-MB-231) cells. mPEG–PLA-Ch exhibited satisfactory hemocompatibility indicating their potential for systemic application. Further, mPEG–PLA-Ch-CUR demonstrated higher rate of reduction of tumor volume in B16F10-xenografted tumor-bearing mice compared to free CUR. At the end of 22 days, the tumor reduced to 1.87-fold (627.72?±?0.9?mm³ versus 1174.68?±?1.64?mm³) compared to the treatment with free CUR. In conclusion, the experimental data in vitro and in vivo indicated that the newly developed CUR-mPEG–PLA-Ch micelles may have promising applications in solid tumors.     

Block copolymer micelles for drug delivery: design, characterization and biological significance

Recently, colloidal carrier systems have been receiving much attention in the field of drug targeting because of their high loading capacity for drugs as well as their unique disposition characteristics in the body. This paper highlights the utility of polymeric micelles formed through the multimolecular assembly of block copolymers as novel core-shell typed colloidal carriers for drug and gene targeting. The process of micellization in aqueous milieu is described in detail based on differences in the driving force of core segregation, including hydrophobic interaction, electrostatic interaction, metal complexation, and hydrogen bonding of constituent block copolymers. The segregated core embedded in the hydrophilic palisade is shown to function as a reservoir for genes, enzymes, and a variety of drugs with diverse characteristics. Functionalization of the outer surface of the polymeric micelle to modify its physicochemical and biological properties is reviewed from the standpoint of designing micellar carrier systems for receptor-mediated drug delivery. Further, the distribution of polymeric micelles is described to demonstrate their long-circulating characteristics and significant tumor accumulation, emphasizing their promising utility in tumor-targeting therapy. As an important perspective on carrier systems based on polymeric micelles, their feasibility as non-viral gene vectors is also summarized in this review article.     

Self-emulsifying drug delivery systems in oral (poly)peptide drug delivery

Introduction: Oral administration of most therapeutic peptides and proteins is mainly restricted due to the enzymatic and absorption membrane barrier of the GI tract. In order to overcome these barriers, various technologies have been explored. Among them, self-emulsifying drug delivery systems (SEDDS) received considerable attention as potential carriers to facilitate oral peptide and protein delivery in recent years.

Areas covered: This review article intends to summarize physiological barriers which limit the bioavailability of orally administrated peptide and protein drugs. Furthermore, the potential of SEDDS to protect incorporated peptides and proteins towards peptidases and proteases and to penetrate the mucus layer is reviewed. Their permeation-enhancing properties and their ability to release the drug in a controlled way are described. Moreover, this review covers the results of in vivo studies providing evidence for this promising approach.

Expert opinion: As SEDDS can: i) provide a protective effect towards a presystemic metabolism; ii) efficiently permeate the intestinal mucus gel layer in order to reach the absorption membrane; and iii) be produced in a very simple and cost-effective manner, they are a promising tool for oral peptide and protein drug delivery.     

Block copolymer micelles for drug delivery: Design,characterization and biological significance

Recently, colloidal carrier systems have been receiving much attention in the field of drug targeting because of their high loading capacity for drugs as well as their unique disposition characteristics in the body. This paper highlights the utility of polymeric micelles formed through the multimolecular assembly of block copolymers as novel core–shell typed colloidal carriers for drug and gene targeting. The process of micellization in aqueous milieu is described in detail based on differences in the driving force of core segregation, including hydrophobic interaction, electrostatic interaction, metal complexation, and hydrogen bonding of constituent block copolymers. The segregated core embedded in the hydrophilic palisade is shown to function as a reservoir for genes, enzymes, and a variety of drugs with diverse characteristics. Functionalization of the outer surface of the polymeric micelle to modify its physicochemical and biological properties is reviewed from the standpoint of designing micellar carrier systems for receptor-mediated drug delivery. Further, the distribution of polymeric micelles is described to demonstrate their long-circulating characteristics and significant tumor accumulation, emphasizing their promising utility in tumor-targeting therapy. As an important perspective on carrier systems based on polymeric micelles, their feasibility as non-viral gene vectors is also summarized in this review article.     

Thermo-responsive shell cross-linked PMMA-b-P(NIPAAm-co-NAS) micelles for drug delivery

Thermo-responsive amphiphilic poly(methyl methacrylate)-b-poly(N-isopropylacrylamide-co-N-acryloxysuccinimide) (PMMA-b-P(NIPAAm-co-NAS)) block copolymer was synthesized by successive RAFT polymerizations. The uncross-linked micelles were facilely prepared by directly dissolving the block copolymer in an aqueous medium, and the shell cross-linked (SCL) micelles were further fabricated by the addition of ethylenediamine as a di-functional cross-linker into the micellar solution. Optical absorption measurements showed that the LCST of uncross-linked and cross-linked micelles was 31.0 °C and 40.8 °C, respectively. Transmission electron microscopy (TEM) showed that both uncross-linked and cross-linked micelles exhibited well-defined spherical shape in aqueous phase at room temperature, while the SCL micelles were able to retain the spherical shape with relatively smaller dimension even at 40 °C due to the cross-linked structure. In vitro drug release study demonstrated a slower and more sustained drug release behavior from the SCL micelles at high temperature as compared with the release profile of uncross-linked micelles, indicating the great potential of SCL micelles developed herein as novel smart carriers for controlled drug release.     

Self-assembled micelles based on gambogenic acid-phospholipid complex for sustained-release drug delivery

Abstract

Objective: To improve the water solubility and enhance the oral bioavailability of gambogenic acid (GNA).

Methods: GNA-phospholipid complex (GNA-PLC) micelles were successfully prepared by anti-solvent method.

Results: The encapsulation efficiency of GNA-PLC micelles can reach 99.33 % (w/w). The average particle size of the GNA-PLC micelles was 291.23?nm which was approximate agreed with the transmission electron microscopy (TEM). In vitro release profile showed the GNA-PLC and GNA-PLC micelles have significant sustained-release of GNA compared with crude GNA. Pharmacokinetic parameters indicated that the area under concentration–time curve (AUC_0→t) of GNA in cases of GNA-PLC and GNA-PLC micelles are 2.04- and 3.92-fold higher than crude GNA, respectively.

Conclusions: The better water solubility and higher bioavailability of GNA in GNA-PLC micelles with significant sustained-release of GNA endow the nanoparticle with great potential in GNA delivery system.     

Solubilization of hydrophobic drugs by methoxy poly(ethylene glycol)-block-polycaprolactone diblock copolymer micelles: theoretical and experimental data and correlations

The solubilization of five model hydrophobic drugs by a series of micelle-forming, water-soluble methoxy poly(ethylene glycol)-block-polycaprolactone diblock copolymers (MePEG-b-PCL) with varying methoxy poly(ethylene glycol) (MePEG) and polycaprolactone (PCL) block lengths was investigated. Variation of the feed weight ratio of MePEG to caprolactone resulted in the synthesis of copolymers with predictable block lengths. The micelle diameter and pyrene partition coefficient (Kv) were directly related to the PCL block length whereas the critical micelle concentrations (CMC) were inversely related to the PCL block length. The aqueous solubilities of the model hydrophobic drugs, indomethacin, curcumin, plumbagin, paclitaxel, and etoposide were increased by encapsulation within the micelles. Drug solubilization was directly related to the compatibility between the solubilizate and PCL as determined by the Flory-Huggins interaction parameter (chisp). Furthermore, the concentration of solubilized drug was also directly related to the PCL block length.     

Poly(ethylene oxide)-block-poly(L-amino acid) micelles for drug delivery

Block copolymer micelles encapsulate water insoluble drugs by chemical and physical means, and they may target therapeutics to their site of action in a passive or active way. In this review, we focus on micelles self-assembled from poly(ethylene oxide)-block-poly(L-amino acid) (PEO-b-PLAA). A common theme in these studies is the chemical modification of the core-forming PLAA block used to adjust and optimize the properties of PEO-b-PLAA micelles for drug delivery. Micelle-forming block copolymer-drug conjugates, micellar nanocontainers and polyion complex micelles have been obtained that mimic functional aspects of biological carriers, namely, lipoproteins and viruses. PEO-b-PLAA micelles may be advantageous in terms of safety, stability, and scale-up.     

Immunosafety and chronic toxicity evaluation of monomethoxypoly(ethylene glycol)-b-poly(lactic acid) polymer micelles for paclitaxel delivery

To investigate the physicochemical properties, immunosafety and chronic toxicity of monomethoxypoly(ethylene glycol)-b-poly(lactic acid) (mPEG-PLA), a copolymer used as a carrier for paclitaxel (PTX) delivery. The H-Nuclear Magnetic Resonance (H-NMR), dynamic light scattering and fluorescence probe technique were conducted to determine the physicochemical properties of mPEG-PLA copolymer. PTX-loaded polymeric micelles were characterized regarding their particle size, entrapment efficiency (EE), drug loading (DL), in vitro drug release and hemolysis rate. The complement activation in human serum and mast cells degranulation were performed by ELISA and RBL-2H3 cell line in vitro, respectively. The chronic toxicity study was carried out on beagle dogs. The optimized PTX-loaded mPEG-PLA (40/60) micelles showed a particle size of 37?nm and EE of 98.0% with a DL of 17.0% w/w. Transmission electron microscopy (TEM) analyses showed that mPEG-PLA (40/60) micelles have spherical shape with dense core. In vitro release study showed a sustained release for 24?h, and the hemolysis study revealed that mPEG-PLA (40/60) was a safe nanocarrier for intravenous administration. mPEG-PLA (40/60) showed a lower complement activation ability compared to mPEG-PLA (50/50) and Cremophor® EL (Cr EL). Furthermore, the chronic toxicity of PTX-loaded mPEG-PLA (40/60) micelles was significantly lower than those of mPEG-PLA (50/50) and Cr EL.