Investigation of liquid crystalline and photocrosslinkable poly[4‐x‐phenyl‐4′‐(m‐methacryloyloxyalkyloxy)cinnamate]s

Three series of liquid‐crystalline‐cum‐photocrosslinkable polymers were synthesized from 4‐x‐phenyl‐4′‐(m‐methacryloyloxyalkyloxy)cinnamates (x = ? H, ? OCH₃ and ? CN; m = 6, 8 and 10) by free radical solution polymerization using azobisisobutyronitrile as an initiator in tetrahydrofuran at 60 °C. All the monomers and polymers were characterized using intrinsic viscosity, and FTIR, ¹H NMR and ¹³C NMR spectroscopy. The liquid crystalline behavior of these polymers was examined using a hot stage optical polarizing microscope. All the polymers exhibited liquid crystalline behavior. The hexamethylene spacer‐containing polymers exhibited grainy textures; in contrast, the octamethylene and decamethylene spacer‐containing polymers showed nematic textures. Differential scanning calorimetry data confirmed the liquid crystalline property of the polymers. Thermogravimetric analysis revealed that all the polymers were stable between 236 and 344 °C in nitrogen atmosphere and underwent degradation thereafter. As the methylene chain length increases in the polymer side‐chain, the thermal stability and char yield of the polymers decrease. The photocrosslinking property of the polymers was investigated using the technique of exposing the polymer solution to UV light and using UV spectroscopy. The crosslinking reaction proceeds via 2π–2π cycloaddition reactions of the ? CH?CH? of the pendant cinnamate ester. The polymers containing electron‐releasing substituents (? OCH₃) showed faster crosslinking than the unsubstituted polymers and those containing electron‐withdrawing substituents (? CN). Copyright © 2007 Society of Chemical Industry     

Novel soluble carbazole‐based poly(aryl ethers): Preparation,properties, and application for dispersing multiwalled carbon nanotubes

Effectively dispersing of carbon nanotubes (CNTs) is the key to producing high performance CNTs/poly(aryl ethers) (PAEs) composite materials. Here, a series of novel soluble carbazole‐based PAEs with different alkyl side‐chains were synthesized corresponding polymers P1, P2, P3, and P4, and characterized clearly by ¹H NMR and IR. All the polymers exhibited good mechanical properties and thermostabilities (T_g ～ 128–212 °C, T_d5% ～ 450–499 °C) as PAEs. Due to containing lots of large π‐conjugated carbazole derivative units and possess suitable solubility, these non‐conjugated polymers can wrap and disperse MWNTs well (238–416 mg/L) in CHCl₃, and the similar work has been reported rarely. This excellent property makes these polymers become a promising and ideal type solubilizer for CNTs/PAEs composite. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46250.     

Polyimides derived from 1,4‐bis [3‐oxy‐(N‐aminophthalimide)] benzene

A novel diamine, 1,4‐bis [3‐oxy‐(N‐aminophthalimide)] benzene (BOAPIB), was synthesized from 1,4‐bis [3‐oxy‐(N‐phenylphthalimide)] benzene and hydrazine. Its structure was determined via IR, ¹H NMR, and elemental analysis. A series of five‐member ring, hydrazine‐based polyimides were prepared from this diamine and various aromatic dianhydrides via one‐step polycondensation in p‐chlorophenol. The inherent viscosities of these polyimides were in the range of 0.17–0.61 dL/g. These polymers were soluble in polar aprotic solvents and phenols at room temperature. Thermogravimetric analysis (TGA) showed that the 5% weight‐loss temperatures of the polyimides were near 450°C in air and 500°C in nitrogen. Dynamic mechanical thermal analysis (DMTA) indicated that the glass‐transition temperatures (T_gs) of these polymers were in the range of 265–360°C. The wide‐angle X‐ray diffraction showed that all the polyimides were amorphous. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly(ethylene oxide)‐based glycopolymers and their biocompatibility with osteoblast cells

Poly(ethylene oxide)‐block‐poly(methacryl‐d ‐glucopyranoside) (PEO‐GP) and poly(methacryl‐d ‐glucopyranoside) (H‐GP) glycopolymers were synthesized by deacetylation of acetylated polymers which were synthesized via atom transfer radical polymerization. The synthesized glycopolymers were characterized using ¹H NMR, ¹³C NMR and Fourier transform infrared (FTIR) spectroscopies, gel permeation chromatography (GPC), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The deacetylated polymers exhibited onset decomposition temperatures about 60 °C lower compared to the polymers having acetyl pendants. The glass transition temperature (T_g) of the acetylated homopolymer was 133 °C and that of the PEO‐based block copolymer was 124 °C. The deacetylated polymers H‐GP and PEO‐GP exhibited T_g values of about ?30 °C. Biocompatibility of the H‐GP and PEO‐GP glycopolymers was obtained by studying osteoblast cell adhesion, viability and proliferation in vitro. The cell viability showed an increase with increasing concentration of H‐GP from 0.1 to 1 µmol L^?1 and then decreased with further increase in its concentration (10–1000 µmol L^?1). PEO‐GP did not show a significant variation in cell viability on variation of its concentration from 0.1 to 1000 µmol L^?1. The significant improvement in biocompatibility with osteoblast cells in the presence of PEO‐GP was considered as due to the covalently bonded PEO segment of the methacrylate glycopolymer block. © 2014 Society of Chemical Industry     

Thermotropic main‐chain liquid‐crystalline photodimerizable poly(vanillylidenealkyloxy alkylphosphate ester)s containing a cyclopentanone moiety

A new class of main‐chain liquid‐crystalline photodimerizable vanillylidene‐containing alkylpolyphosphate esters were synthesized from 2,5‐bis[m‐hydroxyalkyloxy(vanillylidene)] cyclopentanones with various alkylphosphoro‐ dichloridates by solution polycondensation in chloroform at ambient temperature. Their chemical structures were confirmed by FT‐IR, ¹H, ¹³C and ³¹P NMR spectroscopic analysis. Dilute‐solution viscosity values were measured in order to obtain the intrinsic viscosities of the synthesized polymers. Mesogenic properties and phase behavior were investigated by the use of hot‐stage optical polarized microscopy and differential scanning calorimetry. Thermogravimetric analysis revealed that all of the polymers were stable up to 170–230 °C and decomposed with high char yields. The shorter methylene‐chain‐containing polymers did not show a liquid‐crystalline phase, while the longer methylene‐chain‐ containing polymers showed grainy and nematic textures. The T_g, T_m and T_i values of the polymers decreased with increasing flexible methylene chain length in the polymer backbones. The photocrosslinking properties of the polymers were studied by UV light/UV spectroscopy; the crosslinking proceeds via 2π–2π cycloaddition reactions of the vanillylidene exocyclic double bonds of the polymers. The rate of crosslinking was faster for the pendant ethoxy‐containing polymers than that of the pendant methoxy‐containing polymers. Copyright © 2005 Society of Chemical Industry     

Synthesis,characterization and liquid crystalline properties of polyacrylates and polymethacrylates containing aryl ester pendant unit

Aryloxycarbonylphenyl acrylates and methacrylates were prepared by reacting 4‐acryloyloxybenzoyl chloride and 4‐methacryloyloxybenzoyl chloride with different phenols. They were homopolymerized using benzoyl peroxide as the initiator at 65°C in dimethylformamide. The polymers were characterized by IR and ¹H–NMR spectra and size exclusion chromatography. Differential scanning calorimetry and polarizing optical microscopy studies revealed that the phenyl esters of poly(4‐acryloyloxybenzoic acid) and poly(4‐methacryloyloxybenzoic acid) did not show any liquid crystalline properties, but, the para‐aryl–substituted phenyl esters did exhibit mesophase properties in the temperature range of 98–265°C depending on the nature of the aryl substituent. Polymethacrylates exhibit higher T_g, and lower T_m and T_i than the polyacrylates having the same pendant mesogen. Thermogravimetric analyses have shown that the initial decomposition temperatures of the polymers are above 230°C. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 465–474, 2000     

Synthesis and characterization of hyperbranched poly(silyl ester)s

Hyperbranched poly(silyl ester)s were synthesized via the A₂ + B₄ route by the polycondensation reaction. The solid poly(silyl ester) was obtained by the reaction of di‐tert‐butyl adipate and 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The oligomers with tert‐butyl terminal groups were obtained via the A₂ + B₂ route by the reaction of 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyl‐trisi1oxane with excess amount of di‐tert‐butyl adipate. The viscous fluid and soft solid poly(silyl ester)s were obtained by the reaction of the oligomers as big monomers with 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The polymers were characterized by ¹H NMR, IR, and UV spectroscopies, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The ¹H NMR and IR analysis proved the existence of the branched structures in the polymers. The glass transition temperatures (T_g's) of the viscous fluid and soft solid polymers were below room temperature. The T_g of the solid poly(silyl ester) was not found below room temperature but a temperature for the transition in the liquid crystalline phase was found at 42°C. Thermal decomposition of the soft solid and solid poly(silyl ester)s started at about 130°C and for the others it started at about 200°C. The obtained hyperbranched polymers did not decompose completely at 700°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3430–3436, 2006     

Synthesis and Surface Activities of Novel Succinic Acid Monofluoroalkyl Sulfonate Surfactants

Two environmentally friendly succinic acid monofluoroalkyl sulfonate surfactants were synthesized from maleic anhydride and polyethylene glycol mono (1H,1H,7H‐dodecafluoroheptyl) ether, i.e. H(CF₂)₆CH₂OCH₂CH₂OCOCH(SO₃Na)CH₂COOH (FEOS‐1) and H(CF₂)₆CH₂(OCH₂CH₂)₃OCOCH(SO₃Na)CH₂COOH (FEOS‐3). The obtained surfactants were characterized by FT‐IR, ¹H NMR, ¹³C NMR and ¹⁹F NMR in detail. The synthesized fluorinated surfactants have a high thermal stability on the basis of thermogravimetric analysis. Their surface properties were examined and the results show that FEOS‐1 and FEOS‐3 surfactants can reduce the surface tension of water to 25.55 mN m^?1 at 10.25 mmol L^?1 and 21.63 mN m^?1 at 8.33 mmol L^?1, respectively; meanwhile, the introduction of oxyethylene groups enhances the hydrophilicity and micellar forming ability and the longer oxyethylene chains the better surface properties. The Krafft points (K_p) of FEOS‐1 and FEOS‐3 were both below 0 °C, which was lower than perfluoro‐n‐heptanesulfonic acid sodium salt (n‐C₇F₁₅SO₃Na, K_p = 56.5 °C) at a similar length of fluorocarbon chains. Comparison studies on two surfactants above and the conventional fluorocarbon surfactants, perfluorooctanoate of ammonium (PFOA) show that the surfactants have comparable properties to PFOA, thus offering an environmentally friendly synthesizing alternatives to PFOA.     

Vinyl polymerization of norbornene with dinuclear diimine nickel dichloride/MAO

Vinyl‐addition polymerization of norbornene was accomplished by two novel dinuclear diimine nickel dichloride complexes in combination with methylaluminoxane (MAO). The activities were moderate. The catalyst structure, Al/Ni molar ratio, solvents, and polymerization temperature all affected the catalytic activities. The obtained polynorbornenes were characterized by ¹H‐NMR, ¹³C‐NMR, FTIR, DSC, WAXD, and intrinsic viscosity measurements. The vinyl‐addition polymers were amorphous but with a short‐range order and high packing density. The polynorbornenes showed glass transition temperatures (T_g) above 240°C and decomposed above 400°C. The catalyst structure and polymerization conditions have effects on the molecular weight and the microstructure of the polymers. The nickel complex with bulkier substituents in the ligand produced polynorbornene with a higher packing density and higher regularity and, therefore, with higher T_g. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3273–3278, 2003     

Studies of fluorine‐containing bismaleimide resins part I: Synthesis and characteristics of model compounds

A series of fluorine‐containing bismaleimide (FBMI) monomers are synthesized by a 3‐step reaction for using as the applications of low‐k materials. The synthesized FBMI monomers are characterized by the ¹H, ¹³C, ¹⁹F nuclear magnetic resonance (NMR) spectroscopy and element analysis. These FBMI monomers react with free radical initiator or self‐cure to prepare FBMI‐polymers. All the self‐curing FBMI resins have the glass transition temperatures (T_g) in the range of 128–141°C and show the 5% weight loss temperatures (T_5%) of 235–293°C in nitrogen atmosphere. The higher heat resistance of self‐curing FBMI resin relative to FBMI‐homopolymer is due to its higher crosslinking density. The FBMI resins exhibit improved dielectric properties as compared with commercial bismaleimide (BMI) resins with the dielectric constants (D_k) lower than 2.49, which is related to the low polarizability of the C? F bond and the large free volume of CF₃ groups in the polymers. Besides, the flame retardancy of all these FBMI resins could be enhanced via the introduction of Br‐atom. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of aromatic/cycloaliphatic poly(amide‐ imide‐imide)s from bis(4‐amino‐ 3,5‐dimethylphenyl) cycloalkane derivatives

A series of novel aromatic diamines containing cycloaliphatic moieties was synthesized by the reaction of cycloalkanones like cyclohexanone and cycloheptanone with 2,6‐dimethylaniline. The tetrimide diacid was synthesized using the prepared diamine with 3,3′,4,4′‐benzophenonetetracarboxylic acid dianhydride/pyromellitic dianhydride and p‐aminobenzoic acid. The polymers were prepared by treating the tetrimide diacid with different aromatic diamines. The structures of the monomers and polymers were identified using elemental analysis and Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopy. The polymers show excellent solubility. The polymers are amorphous and have high optical transparency. They also show good thermal stability and their T_g value is found to be in the range 268–305 °C. Copyright © 2007 Society of Chemical Industry     

Phase changes of poly(alkoxyphosphazenes), and their behavior in the presence of oligoisobutylene

A series of closely related polyphosphazenes with propoxy, pentoxy, hexoxy, octoxy, isostearyloxy, and 2‐(2‐methoxyethoxy)ethoxy (MEE) side groups, together with cosubstituent species with both the alkoxy and MEE side chains, were studied for their morphology and miscibility with oligoisobutylene (OIB). All the pure polymers except one had a single glass transition temperature. The exception was the species with both isostearyloxy and MEE side groups, which underwent two low‐temperature second‐order transitions, even though 31P NMR spectra indicated the absence of a block‐type structure. For the single‐substituent macromolecules, the solubility at 80°C in OIB increased as the length of the unbranched alkoxy side groups rose from propoxy to octoxy (from 1 to 11 wt/wt%). However, the polymer with two isostearyloxy side chains per repeat unit had a low solubility in OIB (3 wt/wt%), and the species with the two MEE side groups on every repeat unit was totally insoluble. When both alkoxy and MEE side groups were present, the solubility in OIB was also low (0–3%), except for the species with both isostearyloxy and MEE side groups, which was soluble in OIB at a level of 21 wt/wt% at 80°C, and showed T_g evidence of polymer/oligomer miscibility even at ?80°C. Explanations are suggested for the unusual behavior of this polymer. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

The architecture of hydroxy‐functionalized aPS‐b‐random copolymer‐b‐PE via one‐pot strategy combining living free radical polymerization with coordination polymerization

The copolymerization of styrene with ethylene was promoted by CpTiCl₃/BDGE/Zn/MAO catalyst system combining free radical polymerization with coordination polymerization via sequential monomer addition strategy in one‐pot. The effect of polymerization conditions such as temperature, time, ethylene pressure, and Al/Ti molar ratio on the polymerization performance was investigated. The hydroxy‐functionalized aPS‐b‐random copolymer‐b‐PE triblock copolymer was obtained by solvent extraction and determined by GPC, DSC, WAXD, and ¹³C‐NMR. The DSC result indicated that the aPS‐b‐random copolymer‐b‐PE had a T_g at 87°C and a T_m at 119°C which attributed to the T_g of aPS segment and the T_m of PE segment, respectively. The microstructure of the hydroxy‐functionalized aPS‐b‐random copolymer‐b‐PE was further confirmed by WAXD, ¹³C‐NMR, and ¹H‐NMR analysis; and these results demonstrated that the obtained block copolymer consisted of aPS segment, S‐E random copolymer segment, and crystalline PE segment. The connection polymerization of the hydroxy‐functionalized aPS with random copolymer‐b‐PE was revealed by GPC results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of soluble and thermally stable polyamides from diamine containing (quinolin‐8‐yloxy) aniline pendant group

A novel diamine monomer having pendant 4‐(quinolin‐8‐yloxy) aniline group was successfully synthesized via aromatic substitution reaction of 8‐quinolinol with p‐fluoronitrobenzene followed by Pd/C catalyzed hydrazine reduction, amidation reaction between 4‐(quinolin‐8‐yloxy) aniline and 3,5‐dinitrobenzoylcholoride followed by Pd/C catalyzed hydrazine reduction. The diamine monomer was fully characterized by using FTIR, ¹H‐NMR, ¹³C‐NMR, and elemental analysis. The diamine monomer was polymerized with various aromatic and aliphatic dicarboxylic acids to obtain the corresponding polyamides. The polyamides had inherent viscosity in the range of 0.30–0.41 dL/g and exhibited excellent solubility in the polar aprotic solvents such as DMAc, NMP, N,N‐dimethylformamide, Pyridine, and DMSO. The glass transition temperatures (T_g) of the polymers are high (up to 313°C) and the decomposition temperatures (T_i) range between 200 and 370°C, depending on the diacids residue in the polymers backbone. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation,analysis, and isothermal crystallization behavior of poly[1,3‐bis(aminomethyl)cyclohexamethylene oxamide]

Poly[1,3‐bis(aminomethyl)cyclohexaneoxamide] (PBAC2) was synthesized using 1,3‐bis(aminomethyl)cyclohexane (BAC) and dibutyl oxalate (DO) via spray/solid‐state polycondensation (SSP). The structure of the synthesized polyoxamide was confirmed by ¹H‐nuclear magnetic resonance (NMR) and Fourier transform infrared spectroscopy. The weight average molecular weight (M_w) of the polyoxamides prepared was 1.35 × 10⁵. The polyoxamides showed excellent thermal properties with glass transition temperature (T_g) of 150 °C, melting temperature (T_m) of 318 °C, crystallization temperature(T_c) of 253 °C, and initial degradation temperature (T_d) of 417 °C suggesting higher thermal stability than commercial polyamide 6 (T_d = 378 °C). Kinetic studies of PBAC2 predicted a two‐dimensional crystal growth. X‐ray diffraction powder diffraction suggested that the polymer has high crystallinity. A saturated water absorption of 2.8 wt % was recorded for the new polyoxamide, giving it a competitive edge for applications in civil aviation, reinforced plastics, and electronics industry where precise dimensional stability and high thermal resistance properties are a priority. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46345.     

Synthesis of branched benzoxazine monomers with high molecular mass,wide processing window,and properties of corresponding polybenzoxazines

Four cyclotriphosphazene‐based benzoxazine monomers (I, II, III, and IV) with relatively high molecular weight were synthesized by a nucleophilic substitution reaction, and their chemical structures were confirmed by ¹H‐NMR and ³¹P‐NMR. A new term, oxazine value (OV, similar to epoxy value), was first proposed to explain the structure–property relationship of the cured polymers. The polymerization behaviors of the four monomers were studied by differential scanning calorimetry and Fourier transform infrared spectroscopy. The maximum exothermic peaks of the four monomers are in the range 244–248 °C. All monomers possess a wide processing window despite their high molecular weight. The thermal stability, glass‐transition temperature (T_g), and mechanical properties of each cured polymer were studied by thermogravimetric analysis and dynamic mechanical thermal analysis. The char yield at 850 °C, T_g, and storage moduli of PIV (polybenzoxazine obtained from monomer IV) are 60.0%, 218 °C, and 9.0 GPa, respectively. The surface property and humidity absorption character of the cured polybenzoxazines were also studied. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44453.     

Synthesis,characterization, and thermal properties of cyanate esters with azo linkages

A series of azo functionalized diols were synthesized through diazotization which involves the reaction of amine with phenol and 2,6‐dimethyl phenol. Four different amines have been used to prepare five bisphenols. These bisphenols were converted to their corresponding cyanate esters by treatment with cyanogen bromide (BrCN) in the presence of triethylamine (Et₃N). The chemical structures of the prepared compounds were characterized with Fourier Transform Infrared, ¹H‐NMR, ¹³C‐NMR spectroscopy, and elemental analysis. Dynamic curing behavior was investigated using differential scanning calorimetry. The maximum curing temperature of these cyanate esters are in the range of (186–208°C). T_g values of the polycyanurate networks are in the range of 245–276°C. The thermal properties of cured cyanate ester were studied at a heating rate of 10°C min^?1 in N₂ atmosphere. The polymers showed excellent thermal stability (T₁₀ was found to be in the range 405–438°C) and the percentage of char yield at 800°C were found to be 30–49. The flame retardancy of the cyanate ester resins have been studied using limited oxygen index value which is in the range of 29.5–37.1 at 800°C. POLYM. ENG. SCI., 55:47–53, 2015. © 2014 Society of Plastics Engineers     

High‐performance biobased epoxy derived from rosin

Great achievements have been made in the research of biobased thermoplastic polymers, but the progress concerning thermosetting resins has been minor. In particular, research on high‐performance thermosetting polymers from renewable feedstock has not been reported elsewhere. A novel biobased epoxy was synthesized from a rosin acid. Its chemical structure was confirmed using ¹H NMR, ¹³C NMR and Fourier transform infrared spectroscopy. The results indicated that the rosin‐based epoxy possessed high glass transition temperature (T_g = 153.8 °C), high storage modulus at room temperature (G′ = 2.4 GPa) and good thermal stability. A rosin‐based epoxy with excellent properties was achieved. The results suggest it is possible to develop high‐performance thermosetting resins from renewable resources. Copyright © 2010 Society of Chemical Industry     

Synthesis and properties of poly(aryl ether sulfone ether ketone ketone) (PESEKK)

4,4′‐bis(Phenoxy)diphenyl sulfone (DPODPS) was synthesized by reaction of phenol with bis(4‐chlorophenyl) sulfone in tetramethylene sulfone in the presence of NaOH. Two poly(aryl ether sulfone ether ketone ketone)s (PESKKs) with high molecular weight were prepared by low temperature solution polycondensation of DPODPS and terephthaloyl chloride (TPC) or isophthaloyl chloride (IPC), respectively, in 1,2‐dichloroethane and in the presence of aluminum chloride (AlCl₃) and N‐methylpyrrolidone (NMP). The resulting polymers were characterized by various analytical techniques, such as FT‐IR, ¹H‐NMR, DSC, TG, and WAXD. The results show that the T_g and T_d of PESEKKs are much higher, but its T_m is lower than those of PEKK. The other results indicate that PESEKKs exhibit excellent thermostabilities at 300 ± 10°C. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 489–493, 2005     

Synthesis and characterization of dicyanate monomers containing methylene spacers

The bisphenols containing methylene spacer were prepared by treating eugenol/2‐allyl phenol with 2,6‐dimethyl phenol/guiacol/o‐cresol in the presence of AlCl₃. All the bisphenols were converted to their respective cyanate esters by treating with CNBr. The structural confirmation was done by FTIR, ¹H NMR, ¹³C NMR spectral methods, and elemental analysis. Thermal characterization was done by DSC and TGA. DSC transition shows that the T_g is in the range of 208–239°C. The T_g is highest for the cyanate ester Cy(b) with symmetric structure. The T_g of the cured network depends on the length and symmetry of the monomer, T_g being higher for shorter and the para‐substituted monomers. The T₁₀ values are in the range of 364–381°C. The char yield is in the range of 47–53%. From the char yield, the limiting oxygen index (LOI) value was determined, which is used to confirm the flame retardancy of the cyanate ester resins. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008