Linear Interval Tolerance Problem and Linear Programming Techniques

In this paper, we consider the linear interval tolerance problem, which consists of finding the largest interval vector included in ([A], [b]) = {x R ⁿ | A [A], b [b], Ax = b}. We describe two different polyhedrons that represent subsets of all possible interval vectors in ([A], [b]), and we provide a new definition of the optimality of an interval vector included in ([A], [b]). Finally, we show how the Simplex algorithm can be applied to find an optimal interval vector in ([A], [b]).     

Tight bounds for oblivious routing in the hypercube

We prove that in anyN-node communication network with maximum degreed, any deterministic oblivious algorithm for routing an arbitrary permutation requires (N/d) parallel communication steps in the worst case. This is an improvement upon the (N/d ^3/2) bound obtained by Borodin and Hopcroft. For theN-node hypercube, in particular, we show a matching upper bound by exhibiting a deterministic oblivious algorithm that routes any permutation in (N/logN) steps. The best previously known upper bound was (N). Our algorithm may be practical for smallN (up to about 2¹⁴ nodes).C. Kaklamanis was supported in part by NSF Grant NSF-CCR-87-04513. T. Tsantilas was supported in part by NSF Grants NSF-DCR-86-00379 and NSF-CCR-89-02500.     

Complexity and computability of solutions to linear programming systems

Through key examples and constructs, exact and approximate, complexity, computability, and solution of linear programming systems are reexamined in the light of Khachian's new notion of (approximate) solution. Algorithms, basic theorems, and alternate representations are reviewed. It is shown that the Klee-Minty example hasnever been exponential for (exact) adjacent extreme point algorithms and that the Balinski-Gomory (exact) algorithm continues to be polynomial in cases where (approximate) ellipsoidal centered-cutoff algorithms (Levin, Shor, Khachian, Gacs-Lovasz) are exponential. By model approximation, both the Klee-Minty and the new J. Clausen examples are shown to be trivial (explicitly solvable) interval programming problems. A new notion of computable (approximate) solution is proposed together with ana priori regularization for linear programming systems. New polyhedral constraint contraction algorithms are proposed for approximate solution and the relevance of interval programming for good starts or exact solution is brought forth. It is concluded from all this that the imposed problem ignorance of past complexity research is deleterious to research progress on computability or efficiency of computation.This research was partly supported by Project NR047-071, ONR Contract N00014-80-C-0242, and Project NR047-021, ONR Contract N00014-75-C-0569, with the Center for Cybernetic Studies, The University of Texas at Austin.     

A Stylometric Analysis of Ya?ar Kemal’s ? nce Memed Tetralogy

We analyze four nce Memed novels of Yaar Kemal using six style markers: most frequent words, syllable counts, word type – or part of speech – information, sentence length in terms of words, word length in text, and word length in vocabulary. For analysis we divide each novel into five thousand word text blocks and count the frequencies of each style marker in these blocks. The style markers showing the best separation are most frequent words and sentence lengths. We use stepwise discriminant analysis to determine the best discriminators of each style marker. We then use these markers in cross validation based discriminant analysis. Further investigation based on multiple analysis of variance (MANOVA) reveals how the attributes of each style marker group distinguish among the volumes.     

From Conditional Events to Conditional Measures: A New Axiomatic Approach

Our starting point is a definition of conditional event EH which differs from many seemingly similar ones adopted in the relevant literature since 1935, starting with de Finetti. In fact, if we do not assign the same third value u (undetermined) to all conditional events, but make it depend on EH, it turns out that this function t(EH) can be taken as a general conditional uncertainty measure, and we get (through a suitable – in a sense, compulsory – choice of the relevant operations among conditional events) the natural axioms for many different (besides probability) conditional measures.     

Schedulers for larger classes of pinwheel instances

The pinwheel is a hard-real-time scheduling problem for scheduling satellite ground stations to service a number of satellites without data loss. Given a multiset of positive integers (instance)A={a₁,..., a_n}, the problem is to find an infinite sequence (schedule) of symbols from {1,2,...,n} such that there is at least one symboli within any interval of a_i symbols (slots). Not all instancesA can be scheduled; for example, no successful schedule exists for instances whose density,(A)= _i ⁱ (l/a_i), is larger than 1. It has been shown that all instances whose densities are less than a 0.5 density threshold can always be scheduled. If a schedule exists, another concern is the design of a fast on-line scheduler (FOLS) which can generate each symbol of the schedule in constant time. Based on the idea of integer reduction, two new FOLSs which can schedule different classes of pinwheel instances, are proposed in this paper. One uses single-integer reduction and the other uses double-integer reduction. They both improve the previous 0.5 result and have density thresholds of 13/20 and2/3, respectively. In particular, if the elements inA are large, the density thresholds will asymptotically approach In 2 and 1/R2, respectively.This research was supported in part by ONR Grant N00014-87-K-0833, and was done while Francis Chin was visiting the Computer Science Program, The University of Texas at Dallas, Richardson, TX 75083, USA.     

Personalized and Adaptive Services on Board a Car: An Application for Tourist Information

Personalization and adaptation techniques are an interesting opportunity to design new services on-board vehicles. In this context, in fact, the need of an individual user to receive the right service at the right time and in the right way is more critical than in other cases, where personalization and adaptation already showed interesting advantages. At the same time, this context of application can provide new interesting insights for user modeling and adaptation. In the paper we present an architecture for providing personalized services on-board vehicles and we discuss an application to the case of tourist information. We focus on the choices we made to design an on-board system which was as less intrusive and distracting as possible and that could adapt its recommendations, the way it presents them and its own behavior to the user's preferences/interests and to the context of interaction (especially the driving conditions).     

Unification in partially commutative semigroups

Unification algorithms have been constructed for semigroups and commutative semigroups. This paper considers the intermediate case of partially commutative semigroups. We introduce classesN and of such semigroups and justify their use. We present an equation-solving algorithm for any member of the classN. This algorithm is relative to having an algorithm to determine all non-negative solutions of a certain class of diophantine equations of degree 2 which we call -equations. The difficulties arising when attempting to solve equations in members of the class are discussed, and we present arguments that strongly suggest that unification in these semigroups is undecidable.     

States and the free orthogonality monoid

Let (X, #) be an orthogonality space such that the lattice C(X, #) of closed subsets of (X, #) is orthomodular and let (, ) denote the free orthogonality monoid over (X, #). Let C₀(, ) be the subset of C(, ), consisting of all closures of bounded orthogonal sets. We show that C₀(, ) is a suborthomodular lattice of C(, ) and we provide a necessary and sufficient condition for C₀(, ) to carry a full set of dispersion free states.The work of the second author on this paper was supported by National Science Foundation Grant GP-9005.     

Obvious inferences

The notion of obvious inference in predicate logic is discussed from the viewpoint of proof-checker applications in logic and mathematics education. A class of inferences in predicate logic is defined and it is proposed to identify it with the class of obvious logical inferences. The definition is compared with other approaches. The algorithm for implementing the obviousness decision procedure follows directly from the definition.     

Design sensitivity analysis of nonlinear dynamic response of structural and mechanical systems

This paper describes a unified variational theory for design sensitivity analysis of nonlinear dynamic response of structural and mechanical systems for shape, nonshape, material and mechanical properties selection, as well as control problems. The concept of an adjoint system, the principle of virtual work and a Lagrangian-Eulerian formulation to describe the deformations and the design variations are used to develop a unified view point. A general formula for design sensitivity analysis is derived and interpreted for usual performance functionals. Analytical examples are utilized to demonstrate the use of the theory and give insights for application to more complex problems that must be treated numerically.Derivatives The comma notation for partial derivatives is used, i.e. G,_u = G/u. An upper dot represents material time derivative, i.e. ü = ²u/t². A prime implies derivative with respect to the time measured in the reference time-domain, i.e. u = du/d.     

Approximate syllogisms – on the logic of everyday life

Since Aristotle it is recognised that a valid syllogism cannot have two particular premises. However, that is not how a lay person sees it; at least as long as the premises read many, most etc, instead of a plain some. The lay people are right if one considers that these syllogisms do not have strict but approximate (Zadeh) validity. Typically there are only particular premises available in everyday life and one is dependent on such syllogisms. – Some rules on the usage of particular premises are given below.     

Parallel geometric algorithms on a mesh-connected computer

We show that a number of geometric problems can be solved on a n × n mesh-connected computer (MCC) inO(n) time, which is optimal to within a constant factor, since a nontrivial data movement on an MCC requires (n) time. The problems studied here include multipoint location, planar point location, trapezoidal decomposition, intersection detection, intersection of two convex polygons, Voronoi diagram, the largest empty circle, the smallest enclosing circle, etc. TheO(n) algorithms for all of the above problems are based on the classical divide-and-conquer problem-solving strategy.This work was supported in part by the National Science Foundation under Grant DCR 8420814. A preliminary version was presented in the 1987 FJCC, Dallas, TX.     

Logic Based Abstractions of Real-Time Systems

When verifying concurrent systems described by transition systems, state explosion is one of the most serious problems. If quantitative temporal information (expressed by clock ticks) is considered, state explosion is even more serious. We present a notion of abstraction of transition systems, where the abstraction is driven by the formulae of a quantitative temporal logic, called qu-mu-calculus, defined in the paper. The abstraction is based on a notion of bisimulation equivalence, called , n-equivalence, where is a set of actions and n is a natural number. It is proved that two transition systems are , n-equivalent iff they give the same truth value to all qu-mu-calculus formulae such that the actions occurring in the modal operators are contained in , and with time constraints whose values are less than or equal to n. We present a non-standard (abstract) semantics for a timed process algebra able to produce reduced transition systems for checking formulae. The abstract semantics, parametric with respect to a set of actions and a natural number n, produces a reduced transition system , n-equivalent to the standard one. A transformational method is also defined, by means of which it is possible to syntactically transform a program into a smaller one, still preserving , n-equivalence.     

End-to-end communications management using TMN “X” interfaces

The ongoing integration of LANs and WANs to support global communications and businesses and the emergence of integrated broadband communication services has created an increased demand for cooperation between customers, network and service providers to achieve end-to-end service management. Such a cooperation between autonomous authorities, each defining their own administrative management domains, requires the application of an open standardized framework to facilitate and regulate interworking. Such a framework is given by the ITU-T recommendations on TMN, where the so-called X interface is of particular importance for inter-domain management. In this paper, we explain the role of the TMN X interface within an inter-domain TMN architecture supporting end-to-end communications management. We identify the important issues that need to be addressed for the definition and realization of TMN X interfaces and report about our practical experiences with the implementation of TMN X interfaces in the PREPARE project.     

Enhancing the performance of an agent-based manufacturing system through learning and forecasting

Agent-based technology has been identified as an important approach for developing next generation manufacturing systems. One of the key techniques needed for implementing such advanced systems will be learning. This paper first discusses learning issues in agent-based manufacturing systems and reviews related approaches, then describes how to enhance the performance of an agent-based manufacturing system through learning from history (based on distributed case-based learning and reasoning) and learning from the future (through system forecasting simulation). Learning from history is used to enhance coordination capabilities by minimizing communication and processing overheads. Learning from the future is used to adjust promissory schedules through forecasting simulation, by taking into account the shop floor interactions, production and transportation time. Detailed learning and reasoning mechanisms are described and partial experimental results are presented.     

A Typology of Translation Problems for Eurotra Translation Machines

This paper presents a detailed study of Eurotra Machine Translation engines, namely the mainstream Eurotra software known as the E-Framework, and two unofficial spin-offs – the C,A,T and Relaxed Compositionality translator notations – with regard to how these systems handle hard cases, and in particular their ability to handle combinations of such problems. In the C,A,T translator notation, some cases of complex transfer are wild, meaning roughly that they interact badly when presented with other complex cases in the same sentence. The effect of this is that each combination of a wild case and another complex case needs ad hoc treatment. The E-Framework is the same as the C,A,T notation in this respect. In general, the E-Framework is equivalent to the C,A,T notation for the task of transfer. The Relaxed Compositionality translator notation is able to handle each wild case (bar one exception) with a single rule even where it appears in the same sentence as other complex cases.     

A Philosophical Approach to the Concept of Data Model: Is a Data Model, in Fact, a Model?

The design of the database is crucial to the process of designing almost any Information System (IS) and involves two clearly identifiable key concepts: schema and data model, the latter allowing us to define the former. Nevertheless, the term model is commonly applied indistinctly to both, the confusion arising from the fact that in Software Engineering (SE), unlike in formal or empirical sciences, the notion of model has a double meaning of which we are not always aware. If we take our idea of model directly from empirical sciences, then the schema of a database would actually be a model, whereas the data model would be a set of tools allowing us to define such a schema.The present paper discusses the meaning of model in the area of Software Engineering from a philosophical point of view, an important topic for the confusion arising directly affects other debates where model is a key concept. We would also suggest that the need for a philosophical discussion on the concept of data model is a further argument in favour of institutionalizing a new area of knowledge, which could be called: Philosophy of Engineering.     

Where does the end begin? Problems in musico-cognitive modeling

Research with computer systems and musical grammars into improvisation as found in the tabla drumming system of North India has indicated that certain musical sentences comprise (a) variable prefixes, and (b) fixed suffixes (or cadences) identical with those of their original rhythmic themes. It was assumed that the cadence functioned as a kind of target in linear musical space, and yet experiments showed that defining what exactly constituted the cadence was problematic. This paper addresses the problem of the status of cadential patterns, and demonstrates the need for a better understanding and formalization of ambiguity in musico-cognitive processing. It would appear from the discussion that the cadence is not a discrete unit in itself, but just part of an ever-present underlying framework comprising the entire original rhythmic theme. Improvisations (variations), it is suggested, merely break away from and rejoin this framework at important structural points. This endorses the theory of simultaneity. However, the general cognitive implications are still unclear, and further research is required to explore musical ambiguity and the interaction of musical, linguistic, and spatio-motor grammars.