三乙酸纤维素正渗透膜的制备与性能

以三乙酸纤维素（CTA）为膜材料,1,4-二氧六环、丙酮为溶剂,甲醇、乳酸为添加剂,采用相转换法制备了三乙酸纤维素正渗透膜。研究了不同1,4-二氧六环/丙酮配比、添加剂乳酸含量、挥发时间、膜厚度、热处理温度条件下正渗透膜性能的变化规律。研究表明,当采用纯水为原料液,0.56mol/L CaCl2为汲取液时,优化制备的CTA正渗透膜的水通量达到14.10L/(m2?h),溶质反扩散量为0.031mol/(m2?h);采用0.1mol/L NaCl为原料液,4mol/L葡萄糖为汲取液时,优化制备的CTA正渗透膜的水通量保持在5L/(m2?h)以上,对NaCl的截留率大于99%。CTA正渗透膜相比于HTI膜,具有较高的亲水性、水通量、截留率,稳定性更好。     

Protein separation by cellulose acetate/sulfonated poly(ether imide) blend ultrafiltration membranes

A process for purifying aqueous solutions containing macromolecular proteins such as bovine serum albumin (BSA), egg albumin (EA), pepsin, and trypsin has been investigated. Protein removal from food and biorelated industrial waste streams are gaining increased visibility due to environmental concern and saving precious materials. Ultrafiltration (UF) processes are largely being applied for protein separation from aqueous streams. In this work, an attempt has been made to separate the valuable proteins using cellulose acetate (CA)/sulfonated poly(ether imide) (SPEI) blend UF membranes prepared in the absence and presence of the additive, polyethyleneglycol (PEG600) in various compositions. The blend membranes were subjected to the determination of pore statistics and molecular weight cut‐off (MWCO). Porosity and pore size of the membranes increased with increasing concentrations of SPEI and PEG600 in the casting solution. Similarly, the MWCOs of the blend membranes ranged from 20 to greater than 69 kDa, depending on the various polymer blend compositions. Surface morphology of the blend membranes were analyzed using scanning electron microscopy. Studies were carried out to find the rejection and permeate flux of proteins. On increasing the concentration of SPEI and PEG600, the rejection of proteins is decreasing, whereas the permeate flux has an increasing trend. The effect of hydrophilicity of SPEI on fouling of protein for CA/SPEI blend membranes was also discussed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Properties of cellulose/PAN blend membrane

The water flux of a cellulose/PAN blend membrane increased with the PAN content, while retention to glucosan T40 decreased. The water flux decreased and the retention increased with the whole solid content. The membrane obtained had a high ability to remove creatinine and urea. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3105–3111, 2002; DOI 10.1002/app.10021     

Diffusion of solvent from a cast cellulose acetate solution during the formation of skinned membranes

The transport of solvent out of a cast cellulose acetate (CA) solution into the coagulation bath during membrane formation is treated as a diffusion process. From the increase of solvent concentration in the bath with time (solvent leaching experiments) an overall solvent diffusion coefficient has been calculated. In size these coefficients compare well to mutual pseudo-binary solvent-non-solvent diffusion coefficients determined by means of a classical boundary broadening method applied to ternary solutions with fixed CA concentration, but with a gradient in solvent-nonsolvent composition. Since binary polymer-solvent interdiffusion coefficients are at least one order of magnitude lower, it is concluded that the diffusion of solvent into the coagulation bath is essentially a pseudo-binary solvent-non-solvent diffusion process. Combination of experimental results with model calculations for the effect of a thin dense skin on the diffusion of solvent out of the sublayer shows that the casting-leaching diffusion coefficient can be used to describe the out-diffusion of solvent from the layer under the skin provided that the relative skin resistance is not too high, or that the skin thickness is small.     

Prediction of reverse osmosis performance of cellulose acetate membrane

This study illustrates the analytical techniques involved in specifying the membrane and outlines the procedure for predicting the reverse osmosis (RO) performance of these membranes using feed solutions, containing either single solutes or mixed electrolytes having a common ion. The scientific basis for such specification and prediction techniques has been extensively discussed in the literature. In the present work, the governing transport equations for RO systems, involving preferential sorption of water at the membrane–solution interface, are utilized.     

Improvement of filtration performance of polyvinyl chloride/cellulose acetate blend membrane via acid hydrolysis

Based on the hydrophilicity and biodegradability of cellulose acetate (CA), polyvinyl chloride (PVC)/CA blend membrane was prepared by solution comixing and phase transformation method. Then the CA in the blend membrane was partially hydrolyzed under acidic conditions to improve the hydrophilicity of the blend membrane, so as to improve the filtration performance of the PVC/CA blend membrane. The properties of the membranes were systematically characterized by Fourier transform infrared spectroscopy, differential scanning calorimeter, and scanning electron microscopy (SEM). The porosity, water contact angle, pure water flux (PWF), protein retention rate, and mechanical properties of the membrane were measured, and the effect of hydrolysis on the filtration performance of the blend membrane was analyzed. The results showed that the hydrophilicity and porosity of the blend membrane increased, the PWF and protein rejection rate enhanced after acid catalyzed hydrolysis, while the mechanical properties of PVC membrane were maintained. This simple preparation method endows PVC/CA blend membrane with desirable filtration performance, and also helps to overcome the disadvantages of poor hydrophilicity and easy pollution of pure PVC membrane.     

Superior effect of TEMPO-oxidized cellulose nanofibrils (TOCNs) on the performance of cellulose triacetate (CTA) ultrafiltration membrane

Cellulose triacetate (CTA) ultrafiltration membranes were prepared via phase inversion technique using hydrophilic TEMPO-oxidized cellulose nanofibrils (TOCNs) as modifying agents. The permeation performance of the prepared membranes was evaluated in terms of pure water flux (Ji), protein rejection (Rm) and flux recovery ratio (FRR). Membrane surface morphology and cross-sectional structures were characterized by atomic-force microscopy (AFM) and scanning electron microscopy (SEM), respectively. XRD was performed in order to investigate the interactions between membrane components. Meanwhile, the effects of TOCN concentration on hydrophilicity of the membrane surface and mechanical properties were also examined. The experimental results indicated that CTA/TOCN composite membranes exhibit significant differences in surface properties and intrinsic properties due to the addition of TOCNs.     

Studies on cellulose acetate–carboxylated polysulfone blend ultrafiltration membranes—Part II

Hydrophilic polysulfone ultrafiltration membranes were prepared from blends of cellulose acetate and carboxylated polysulfones of 0.43 and 0.75 degrees of carboxylation. The effects of degree of carboxylation on membrane characteristics such as compaction, pure water flux, water content and membrane hydraulic resistance, have been investigated to evaluate the performance of the membranes. The influence of the degree of carboxylation on the performance of the blend membranes of various blend polymer compositions has been investigated and also compared with earlier reports on blend membranes prepared from cellulose acetate and polysulfone or carboxylated polysulfone of 0.14 degree of carboxylation. © 2003 Society of Chemical Industry     

醋酸纤维素-壳聚糖共混超滤膜的制备和性能

以自制壳聚糖(CN)作为第二聚合物成分与醋酸纤维素(CA)共混,采用相转移法制备超滤膜;对影响膜性能的主要因素做了简单的讨论,并与醋酸纤维素二甲亚砜(CA-DMSO)溶剂膜相比较,初步探讨了所制备的共混膜对颜料废水的处理情况.     

反渗透膜保养方式研究

反渗透水处理作为一种科技含量较高的水处理脱盐技术，在当今工业生产中应用越来越广泛。结合郑州热电厂水处理设备运行负荷变化的特点，就反渗透膜的长期保养技术及工艺进行探讨，采用药液(甲醛溶液)进行反渗透膜长期保养，一方面节约了能源，降低了生产成本，另一方面又保证了反渗透系统运行的可靠性。     

PA/PEG交联共聚反渗透膜的制备及耐污染性能

以聚丙烯腈（PAN）超滤膜为基底,在均苯三甲酰氯（TMC）和间苯二胺（MPD）界面聚合反应过程中引入聚乙二醇（PEG）,制备聚酰胺（PA）/PEG反渗透复合膜。利用傅里叶红外光谱（FTIR）、X射线光电子能谱（XPS）、场发射扫描电镜（FE-SEM）和原子力显微镜（AFM）等对膜的结构和物化性质进行了表征。考察了PEG分子量、PEG加入量、热处理温度及时间对膜反渗透性能的影响,并系统考察了膜对十二烷基硫酸钠（SDS）、十二烷基三甲基溴化铵（DTAB）以及牛血清蛋白（BSA）三种不同荷电性典型污染物的耐受性能。实验结果表明,相比于未改性的PA反渗透膜,PEG交联共聚反渗透膜的盐截留率和通量恢复率均有所提高。其中PA/PEG1000-0.1膜渗透通量为3.96kg/(m²?h),NaCl表观截留率为97.5%,并且对于SDS、DTAB和BSA都表现出较高的耐污染性,其中,SDS污染清洗后膜的通量恢复率可达89.4%。     

界面聚合工艺条件对反渗透复合膜性能的影响

以聚砜超滤膜为支撑膜,间苯二胺(MPD)为水相功能单体,均苯三甲酰氯(TMC)为油相功能单体,通过界面聚合法制备了反渗透复合膜。研究了功能单体浓度、界面聚合反应时间、界面聚合成膜后热处理时间和温度等条件对复合膜分离性能的影响;并对在水相中添加相转移催化剂对复合膜分离性能的影响和相转移催化机理进行了初步探讨。首先在单因素实验条件下确定工艺条件的优化范围,然后经过正交实验得到最佳工艺条件,实验结果表明, 油相中TMC浓度为3 g•L^-1、水相中MPD浓度为20 g•L^-1、界面聚合反应时间为30 s、界面聚合成膜后热处理温度为90 ℃、后处理时间15 min时,所制备的反渗透复合膜表现出良好的分离性能,通量达14.91 L•m^-2•h^-1,截留率为0.951(测试条件: 压力1.6 MPa, 温度25 ℃, NaCl浓度20000 mg•L^-1);当水相中MPD浓度较低时,加入适量的相转移催化剂,能有效地改善膜的分离性能。     

反渗透膜元件损坏诊断研究

为保证电厂锅炉补给水系统稳定运行,针对蒙古国第四电厂反渗透系统运行过程中出现的异常现象,通过采用外观检测、脱盐率检测、探针测试、染色试验及电子光谱化学分析(ESCA)等检测分析手段检测膜元件,结果表明反渗透膜元件在靠近进水侧300 mm处有物理损坏,并被证实是受到含氯氧化物污染所致,氯含量高达1.01%。通过更换新反渗透膜元件,反渗透系统恢复正常运行。为进一步提高反渗透系统的运行稳定性,今后应以研发可替代聚酰胺的新型抗氧化膜材料或对聚酰胺进行抗氧化改性为研究方向,并同时兼顾通量和压力损失等因素。     

Effect of cellulose triacetate membrane thickness on forward‐osmosis performance and application for spent electroless nickel plating baths

Cellulose triacetate (CTA) forward‐osmosis (FO) membranes were prepared via the phase inversion method. The influence of thickness on the performance and morphology of CTA FO membranes was discussed in detail. When the thickness of the membrane was 50.0 ± 0.5 μm (CTA4), the prototype CTA membranes displayed a water flux of 20.2 L m^?2 h^?1 and a reverse salt transport of 14.6 g m^?2 h^?1 using 1 mol/L NaCl as the draw solution and deionized water as the feed solution during the FO process at 25 °C. In addition, the high‐performance CTA4 FO membranes have been used to process spent electroless nickel plating baths where the water flux could reach 13 L m^?2 h^?1 and NiSO₄·6H₂O crystals occurred in the feed solution of the spent electroless nickel plating baths. The recovery rates of NiSO₄·6H₂O and water from the spent electroless nickel plating baths were 44.54% and 53.53%, respectively. This study focused on improving membrane design for the FO process and finding a new method of waste liquor or wastewater treatment. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45049.     

Analysis of hollow fiber reverse osmosis membrane module of axial flow type

Several analyses of hollow fiber reverse osmosis (RO) modules in which permeate water flows from the outer to the inner side of the membrane have been attempted over the past 20 years. In our previous work, an FCP (Friction Concentration Polarization) model showed good agreement with a wide range of actual performance data of a hollow fiber RO membrane module of radial flow type. In this work, this analytical model was applied to axial flow type hollow fiber modules. The performance of the axial flow type module with high packing density of hollow fibers was analyzed, taking into consideration the axial concentration profile in the module. It was confirmed that this model showed good agreement with experimental data for an axial flow type RO membrane module. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

反渗透膜脱硼技术研究进展

硼是生命体中必不可少的微量元素,但是摄入过量的硼会危害动植物的生长发育。在现有脱硼技术中,反渗透膜脱硼被认为最具应用前景,但受硼酸分子的分子直径小和不带电荷等影响,反渗透膜对硼的脱除仍不能满足实际要求,因此制备高脱硼反渗透膜具有重要意义。本文综述了近年来反渗透膜脱硼技术的研究进展,重点阐述了提高反渗透膜脱硼率的机制,主要思路包括优化反渗透膜结构和利用硼酸特殊性质;改善反渗透膜脱硼性能的有效途径包括开发新型膜材料,优化界面聚合工艺和物理化学法改性等;制备高脱硼反渗透膜的主要障碍是水硼传输的trade-off现象和缺少针对水和硼传输的模型。另外,硼酸分子具有独特的物理化学性质,可以借助硼酸分子研究聚酰胺反渗透膜的网络结构、水硼在膜内的传输机制和引起trade-off现象的因素。     

Preparation of polyacrylonitrile and cellulose acetate blend fibers through wet‐spinning

Fibers containing both polyacrylonitrile (PAN) and cellulose acetate (CA) were prepared through wet‐spinning by using N,N‐dimethylformamide (DMF) as a solvent. Compatibility of PAN and cellulose acetate blend (PCB) fibers was investigated by means of scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and infrared (IR) spectrophotometry. The absorptive capacity and mechanical properties of the fibers were measured. It was observed that the surface and the cross section of PAN fibers were quite smooth and free from voids and microcracks, whereas cracks and voids were present on the surface and cross section of blend fibers, which increased with the incorporation of CA in the blend. Moisture regains of blend fibers were quite high while their tensile properties showed a partial decrease. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2000–2005, 2007     

反渗透膜元件严重污染情况下的化学清洗

叙述严重污染的反渗透膜的化学清洗全过程.提出了各清洗步骤的最有效清洗药剂和最佳清洗条件.     

A comparative study of the thermal discharge behaviour of cellulose diacetate and cellulose triacetate films

The thermal discharge behaviour of cellulose diacetate (CA2) (39% acetyl content) and cellulose triacetate (CA3) (44% acetyl content) films was studied at different polarizing temperatures and fields. Cellulose diacetate exhibited two peaks, one at low temperatures and the other at high temperatures, whereas cellulose triacetate exhibited only one peak. The origin of these peaks in CA2 is attributed to dipolar orientation and space charge polarization respectively, while the only peak in CA3 is due to space charge polarization. The difference in thermal discharge behaviour of CA2 and CA3 is attributed to the difference in acetyl contents of the two acetates.     

Cellulose membranes for reverse osmosis Part I. RO cellulose acetate membranes including a composite with polypropylene

With the aim of obtaining RO membranes for brackish water desalination from purified celluloses (cotton linters and bleached bagasse pulp), two reactions (heterogeneous and homogeneous) were applied for the synthesis of cellulose acetate (CA). The efficiency of the membranes was measured and compared with those prepared from purchased CA and prepared CA by acetylation of imported high-grade viscose wood pulp. The effect of blending CA with polypropylene (PP), on the efficiency of the prepared RO membranes was also studied. Results showed that the method of preparation of CA plays a profound effect on the salt rejection and water flux of the RO membranes. The efficiencies of RO membranes formed from heterogeneously acetylated celluloses are higher than those prepared from homogeneous ones. Blending the acetylated cellulose with 9% PP wastes improves the efficiency of membranes prepared from the homogeneously acetylated celluloses.