Bimetallic Cage-Based Metal–Organic Frameworks for Electrochemical Hydrogen Evolution Reaction with Enhanced Activity

A cage-based metal–organic framework (Ni-NKU-101) with biphenyl-3,3’,5,5’-tetracarboxylic acid was synthesized via solvothermal method. Ni-NKU-101 contains two types of cages based on trinuclear and octa-nuclear nickel-clusters that are connected with each other by the 4-connected ligands, to form a 3D framework with a new topology. A mixed-metal strategy was used to synthesize isostructural bimetallic MOFs of M_xNi_1-x-NKU-101 (M=Mn, Co, Cu, Zn). The electrocatalytic studies showed that the hydrogen evolution reaction (HER) activity of Cu_xNi_1-x-NKU-101 is much higher than that of other M_xNi_1-x-NKU-101 catalysts in acidic aqueous solution, owing to the synergistic effect of the bimetallic centers. The optimized Cu_0.19Ni_0.81-NKU-101 has an overpotential of 324 mV at 10 mA cm⁻² and a Tafel slope of 131 mV dec⁻¹. The mechanism of HER activity over these bimetallic MOF-based electrocatalysts are discussed in detail.     

Heteroatom-Doped Ag25 Nanoclusters Encapsulated in Metal–Organic Frameworks for Photocatalytic Hydrogen Production

Atomically precise metal nanoclusters (NCs) with unique optical properties and abundant catalytic sites are promising in photocatalysis. However, their light-induced instability and the difficulty of utilizing the photogenerated carriers for photocatalysis pose significant challenges. Here, MAg₂₄ (M=Ag, Pd, Pt, and Au) NCs doped with diverse single heteroatoms have been encapsulated in a metal–organic framework (MOF), UiO-66-NH₂, affording MAg₂₄@UiO-66-NH₂. Strikingly, compared with Ag₂₅@UiO-66-NH₂, the MAg₂₄@UiO-66-NH₂ doped with heteroatom exhibits much enhanced activity in photocatalytic hydrogen production, among which AuAg₂₄@UiO-66-NH₂ presents the best activity up to 3.6 mmol g⁻¹ h⁻¹, far superior to all other counterparts. Moreover, they display excellent photocatalytic recyclability and stability. X-ray photoelectron spectroscopy and ultrafast transient absorption spectroscopy demonstrate that MAg₂₄ NCs encapsulated into the MOF create a favorable charge transfer pathway, similar to a Z-scheme heterojunction, when exposed to visible light. This promotes charge separation, along with optimized Ag electronic state, which are responsible for the superior activity in photocatalytic hydrogen production.     

A Titanium Metal–Organic Framework with Visible-Light-Responsive Photocatalytic Activity

The one-step synthesis and characterization of a new and robust titanium-based metal–organic framework, ACM-1 , is reported. In this structure, which is based on infinite Ti−O chains and 4,4′,4′′,4′′′-(pyrene-1,3,6,8-tetrayl) tetrabenzoic acid as a photosensitizer ligand, the combination of highly mobile photogenerated electrons and a strong hole localization at the organic linker results in large charge-separation lifetimes. The suitable energies for band gap and conduction band minimum (CBM) offer great potential for a wide range of photocatalytic reactions, from hydrogen evolution to the selective oxidation of organic substrates.     

Accelerated Dynamic Reconstruction in Metal–Organic Frameworks with Ligand Defects for Selective Electrooxidation of Amines to Azos Coupling with Hydrogen Production

Electrosynthesis coupled hydrogen production (ESHP) mostly involves catalyst reconstruction in aqueous phase, but accurately identifying and controlling the process is still a challenge. Herein, we modulated the electronic structure and exposed unsaturated sites of metal–organic frameworks (MOFs) via ligand defect to promote the reconstruction of catalyst for azo electrosynthesis (ESA) coupled with hydrogen production overall reaction. The monolayer Ni-MOFs achieved 89.8 % Faraday efficiency and 90.8 % selectivity for the electrooxidation of 1-methyl-1H-pyrazol-3-amine (Pyr−NH₂) to azo, and an 18.5-fold increase in H₂ production compared to overall water splitting. Operando X-ray absorption fine spectroscopy (XAFS) and various in situ spectroscopy confirm that the ligand defect promotes the potential dependent dynamic reconstruction of Ni(OH)₂ and NiOOH, and the reabsorption of ligand significantly lowers the energy barrier of rate-determining step (*Pyr−NH to *Pyr−N). This work provides theoretical guidance for modulation of electrocatalyst reconstruction to achieve highly selective ESHP.     

Enhancing Multicomponent Metal–Organic Frameworks for Low Pressure Liquid Organic Hydrogen Carrier Separations

The resurgence of interest in the hydrogen economy could hinge on the distribution of hydrogen in a safe and efficient manner. Whilst great progress has been made with cryogenic hydrogen storage or liquefied ammonia, liquid organic hydrogen carriers (LOHCs) remain attractive due to their lack of need for cryogenic temperatures or high pressures, most commonly a cycle between methylcyclohexane and toluene. Oxidation of methylcyclohexane to release hydrogen will be more efficient if the equilibrium limitations can be removed by separating the mixture. This report describes a family of six ternary and quaternary multicomponent metal–organic frameworks (MOFs) that contain the three-dimensional cubane-1,4-dicarboxylate (cdc) ligand. Of these MOFs, the most promising is a quaternary MOF (CUB-30), comprising cdc, 4,4′-biphenyldicarboxylate (bpdc) and tritopic truxene linkers. Contrary to conventional wisdom that adsorptive interactions with larger, hydrocarbon guests are dominated by π–π interactions, here we report that contoured aliphatic pore environments can exhibit high selectivity and capacity for LOHC separations at low pressures. This is the first time, to the best of our knowledge, where selective adsorption for cyclohexane over benzene is witnessed, underlining the unique adsorptive behavior afforded by the unconventional cubane moiety.     

An Ultra-Microporous Metal–Organic Framework with Exceptional Xe Capacity

Molecular confinement plays a significant effect on trapped gas and solvent molecules. A fundamental understanding of gas adsorption within the porous confinement provides information necessary to design a material with improved selectivity. In this regard, metal–organic framework (MOF) adsorbents are ideal candidate materials to study confinement effects for weakly interacting gas molecules, such as noble gases. Among the noble gases, xenon (Xe) has practical applications in the medical, automotive and aerospace industries. In this Communication, we report an ultra-microporous nickel-isonicotinate MOF with exceptional Xe uptake and selectivity compared to all benchmark MOF and porous organic cage materials. The selectivity arises because of the near perfect fit of the atomic Xe inside the porous confinement. Notably, at low partial pressure, the Ni–MOF interacts very strongly with Xe compared to the closely related Krypton gas (Kr) and more polarizable CO₂. Further ¹²⁹Xe NMR suggests a broad isotropic chemical shift due to the reduced motion as a result of confinement.     

Metal–Organic Framework Disintegrants: Enzyme Preparation Platforms with Boosted Activity

An enzyme formulation using customized enzyme activators (metal ions) to directly construct metal–organic frameworks (MOFs) as enzyme protective carriers is presented. These MOF carriers can also serve as the disintegrating agents to simultaneously release enzymes and their activators during biocatalysis with boosted activities. This highly efficient enzyme preparation combines enzyme immobilization (enhanced stability, easy operation) and homogeneous biocatalysis (fast diffusion, high activity). The MOF serves as an ion pump that continuously provides metal ion activators that greatly promote the enzymatic activities (up to 251 %). This MOF–enzyme composite demonstrated an excellent protective effect against various perturbation environments. A mechanistic investigation revealed that the spontaneous activator/enzyme release and ion pumping enable enzymes to sufficiently interact with their activators owing to the proximity effects, leading to a boost in biocatalytic performance.     

A Redox-Active 2D Metal–Organic Framework for Efficient Lithium Storage with Extraordinary High Capacity

Metal–organic framework cathodes usually exhibit low capacity and poor electrochemical performance for Li-ion storage owing to intrinsic low conductivity and inferior redox activity. Now a redox-active 2D copper–benzoquinoid (Cu-THQ) MOF has been synthesized by a simple solvothermal method. The abundant porosity and intrinsic redox character endow the 2D Cu-THQ MOF with promising electrochemical activity. Superior performance is achieved as a Li-ion battery cathode with a high reversible capacity (387 mA h g⁻¹), large specific energy density (775 Wh kg⁻¹), and good cycling stability. The reaction mechanism is unveiled by comprehensive spectroscopic techniques: a three-electron redox reaction per coordination unit and one-electron redox reaction per copper ion mechanism is demonstrated. This elucidatory understanding sheds new light on future rational design of high-performance MOF-based cathode materials for efficient energy storage and conversion.     

Azo-Functionalized Zirconium-Based Metal−Organic Polyhedron as an Efficient Catalyst for CO2 Fixation with Epoxides

Chemical fixation of CO₂ as C1 source at ambient temperature and low pressure is an energy-saving way to make use of the green-house gas, but it still remains a challenge since efficient catalyst with high catalytic active sites is required. Here, a novel monoclinic azo-functionalized Zr-based metal−organic polyhedron (Zr-AZDA) has been prepared and applied in CO₂ fixation with epoxides. The inherent azo groups not only endow Zr-AZDA with good solubilization, but also act as basic sites to enrich CO₂ showing efficient synergistic catalysis as confirmed by TPD-CO₂ analysis. XPS results demonstrate that the Zr active sites in Zr-AZDA possess suitable Lewis acidity, which satisfies both substrates activation and products desorption. DFT calculation indicates the energy barrier of the rate-determining step in CO₂ cycloaddition could be reduced remarkably (by ca. 60.9 %) in the presence of Zr-AZDA, which may rationalize the mild and efficient reaction condition employed (80 °C and 1 atm of CO₂). The work provides an effective multi-functional cooperative method for improvement of CO₂ cycloaddition.     

Partially Pyrolyzed Binary Metal–Organic Framework Nanosheets for Efficient Electrochemical Hydrogen Peroxide Synthesis

Herein, we developed a partially controlled pyrolysis strategy to create evenly distributed NiO nanoparticles within NiFe-MOF nanosheets (MOF NSs) for electrochemical synthesis of H₂O₂ by a two-electron oxygen reduction reaction (ORR). The elemental Ni can be partially transformed to NiO and uniformly distributed on the surface of the MOF NSs, which is crucial for the formation of the particular structure. The optimized MOF NSs-300 exhibits the highest activity for ORR with near-zero overpotential and excellent H₂O₂ selectivity (ca. 99 %) in 0.1 m KOH solution. A high-yield H₂O₂ production rate of 6.5 mol g_cat⁻¹ h⁻¹ has also been achieved by MOF NSs-300 in 0.1 m KOH and at 0.6 V (vs. RHE). In contrast to completely pyrolyzed products, the enhanced catalytic activities of partially pyrolyzed MOF NSs-300 originates mainly from the retained MOF structure and the newly generated NiO nanoparticles, forming the coordinatively unsaturated Ni atoms and tuning the performance towards electrochemical H₂O₂ synthesis.     

A Porous Sulfonated 2D Zirconium Metal–Organic Framework as a Robust Platform for Proton Conduction

By using the strategy of pre-assembly chlorosulfonation applied to a linker precursor, the first sulfonated zirconium metal–organic framework ( JUK-14 ) with two-dimensional (2D) structure, was synthesized. Single-crystal X-ray diffraction reveals that the material is built of Zr₆O₄(OH)₄(COO)₈ oxoclusters, doubly 4-connected by angular dicarboxylates, and stacked in layers spaced 1.5 nm apart by the presence of sulfonic groups. JUK-14 exhibits excellent hydrothermal stability, permanent porosity confirmed by gas adsorption studies, and shows high (>10⁻⁴ S/cm) and low (<10⁻⁸ S/cm) proton conductivity under humidified and anhydrous conditions, respectively. Post-synthesis inclusion of imidazole improves the overall conductivity increasing it to 1.7×10⁻³ S/cm at 60 °C and 90 % relative humidity, and by 3 orders of magnitude at 160 °C. The combination of 2D porous nature with robustness of zirconium MOFs offers new opportunities for exploration of the material towards energy and environmental applications.     

Bivariate Metal–Organic Frameworks with Tunable Spin-Crossover Properties

In this work, pyrazine ( A ), aminopyrazine ( B ), quinoxaline ( C ), and 5,6,7,8-tetrahydroquinoxaline ( D ) have been screened out among a large number of pyrazine derivatives to construct Hofmann-type metal–organic frameworks (MOFs) Fe(L)[M(CN)₄] (M=Pt, Pd) with similar 3D pillared-layer structures. X-ray single-crystal diffraction reveals that the alternate linkage between M and Fe^II ions through cyano bridges forms the 2D extended metal cyanide sheets, and ligands A – D acted as vertical columns to connect the 2D sheets to give 3D pillared-layer structures. Subsequently, a series of bivariate MOFs were constructed by pairwise combination of the four ligands A–D , which were confirmed by ¹H NMR, PXRD, FTIR, and Raman spectroscopy. The results demonstrated that ligand size and crystallization rate play a dominant role in constructing bivariate Hofmann-type MOFs. More importantly, the spin-crossover (SCO) properties of the bivariate MOFs can be finely tuned by adjusting the proportion of the two pillared ligands in the 3D Hofmann-type structures. Remarkably, the spin transition temperatures, T_c↑ and T_c↓ of Fe( A )_x( B )_1−x[Pt(CN)₄] (x=0 to 1) can be adjusted from 239 to 254 K and from 248 to 284 K, respectively. Meanwhile, the width of the hysteresis loops can be widened from 9 to 30 K. Changing Pt to Pd, the hysteresis loops of Fe( A )_x( B )_1−x[Pd(CN)₄] can be tuned from 9 (T_c↑=215 K, T_c↓=206 K) to 24 K (T_c↑=300 K, T_c↓=276 K). This research provides wider implications in the development of advanced bistable materials, especially in precisely regulating SCO properties.     

Two-Dimensional Metal–Organic Framework Nanosheets with Cobalt-Porphyrins for High-Performance CO2 Electroreduction

The electrochemical reduction of CO₂ presents a promising strategy to mitigate the greenhouse effect and reduce excess carbon dioxide emission to realize a carbon-neutral energy cycle, but it suffers from the lack of high-performance electrocatalysts. In this work, catalytic active cobalt porphyrin [TCPP(Co)=(5,10,15,20)-tetrakis(4-carboxyphenyl)porphyrin-Co^II] was precisely anchored onto water-stable 2D metal–organic framework (MOF) nanosheets (Zr-BTB) to obtain ultrathin 2D MOF nanosheets [TCPP(Co)/Zr-BTB] with accessible catalytic sites for the CO₂ reduction reaction. Compared with molecular cobalt porphyrin, the TCPP(Co)/Zr-BTB exhibits an ultrahigh turnover frequency (TOF=4768 h⁻¹ at −0.919 V vs. reversible hydrogen electrode, RHE) owing to high active-site utilization. In addition, three post-modified 2D MOF nanosheets [TCPP(Co)/Zr-BTB-PABA, TCPP(Co)/Zr-BTB-PSBA, TCPP(Co)/Zr-BTB-PSABA] were obtained, with the modifiers of p-(aminomethyl)benzoic acid (PABA), p-sulfobenzoic acid potassium (PSBA), and p-sulfamidobenzoic acid (PSABA), to change the micro-environments around TCPP(Co) through the tuning of steric effects. Among them, the TCPP(Co)/Zr-BTB-PSABA exhibited the best performance with a faradaic efficiency (FE_CO) of 85.1 %, TOF of 5315 h⁻¹, and j_total of 6 mA cm⁻² at −0.769 V (vs. RHE). In addition, the long-term durability of the electrocatalysts is evaluated and the role of pH buffer is revealed.     

Quest for Zeolite-like Supramolecular Assemblies: Self-Assembly of Metal–Organic Squares via Directed Hydrogen Bonding

Our conceived approach based on the directed assembly of functional metal–organic squares (MOSs), 4-membered ring (4MR) building units, permitted the construction of two novel zeolite-like supramolecular assemblies (ZSAs), namely [Co₄(ImDC)₄(En)₄]⋅9 H₂O⋅1.5 DMF ( ZSA-10 ) and [Co₄(ImDC)₄(En)₄]⋅7 H₂O ( ZSA-11 ) (H₃ImDC=4,5-imidazoledicarboxylic acid, En=ethylenediamine, DMF=N,N-dimethylformamide). The elected MOSs encompass both trans- and cis-coordinated nodes, offering complementary peripheral functional groups for their directed assembly into zeolite-like topologies via supramolecular hydrogen bonding interactions. Distinctly, ZSA-10 possesses the underling MER zeolite topology and is the only pure MER framework material (without any supporting templates) exhibiting permanent porosity up to now. ZSA-11 has the underlying ABW topology together with one type of narrow channel.     

A Hydrolytically Stable Vanadium(IV) Metal–Organic Framework with Photocatalytic Bacteriostatic Activity for Autonomous Indoor Humidity Control

Metal–organic frameworks (MOFs) with long-term stability and reversible high water uptake properties can be ideal candidates for water harvesting and indoor humidity control. Now, a mesoporous and highly stable MOF, BIT-66 is presented that has indoor humidity control capability and a photocatalytic bacteriostatic effect. BIT-66 (V₃(O)₃(H₂O)(BTB)₂), possesses prominent moisture tunability in the range of 45–60 % RH and a water uptake and working capacity of 71 and 55 wt %, respectively, showing good recyclability and excellent performance in water adsorption–desorption cycles. Importantly, this MOF demonstrates a unique photocatalytic bacteriostatic behavior under visible light, which can effectively ameliorate the bacteria and/or mold breeding problem in water adsorbing materials.     

A Light-Responsive Metal–Organic Framework Hybrid Membrane with High On/Off Photoswitchable Proton Conductivity

Mimicking biological proton pumps to achieve stimuli-responsive protonic solids has long been of great interest for their diverse applications in fuel cells, chemical sensors, and bio-electronic devices. Now, dynamic light-responsive metal–organic framework hybrid membranes can be obtained by in situ encapsulation of photoactive molecules (sulfonated spiropyran, SSP), as the molecular valve, into the cavities of the host ZIF-8. The configuration of SSP can be changed and switched reversibly in response to light, generating different mobile acidic protons and thus high on/off photoswitchable proton conductivity in the hybrid membranes and device. This device exhibits a high proton conductivity, fast response time, and extremely large on/off ratio upon visible-light irradiation. This approach might provide a platform for creating emerging smart protonic solids with potential applications in the remote-controllable chemical sensors or proton-conducting field-effect transistors.     

A Two-Dimensional Metal–Organic Polymer Enabled by Robust Nickel–Nitrogen and Hydrogen Bonds for Exceptional Sodium-Ion Storage

Organic electrode materials suffer from low electronic conductivity and poor structure stability. Herein, a metal–organic polymer, Ni-coordinated tetramino-benzoquinone (Ni-TABQ), is synthesized via d–π hybridization. The polymer chains are stitched by hydrogen bonds to feature as a robust two-dimensional (2D) layered structure. It offers both electron conduction and Na⁺ diffusion pathways along the directions of the polymer chains and the hydrogen bonds. With both the conjugated benzoid carbonyls and imines as the redox centers for the insertion and extraction of Na⁺, the Ni-TABQ delivers high capacities of about 469.5 mAh g⁻¹ at 100 mA g⁻¹ and 345.4 mAh g⁻¹ at 8 A g⁻¹. The large capacities are sustained for 100 cycles with almost 100 % coulombic efficiencies. The exceptional electrochemical performance is attributed to the unique 2D electron conduction and Na⁺ diffusion pathways enabled by the robust Ni–N and hydrogen bonds.     

A Zeolite-Like Metal–Organic Framework Based Membrane for Reverse Selective Hydrogen Separation and Butane Isomer Sieving

Here, the fabrication of a defect-free membrane that is based on a zeolite-like metal-organic framework (ZMOF) with the underlying ana topology is reported. The unique ana -ZMOF structure provides high degree of pore connectivity, which is reflected by the fast transport of gases. Prominently, it offers an optimum pore-aperture size, affording notable sieving selectivity for butane/isobutane, and optimal pore energetics for reverse CO₂/H₂ separation. This emphasize the potential for the application of pure MOF membranes, paving the way to more sustainability of energy resources.     

2D Metal–Organic Framework Nanosheets based on Pd-TCPP as Photocatalysts for Highly Improved Hydrogen Evolution

In this report, a 2D MOF nanosheet derived Pd single-atom catalyst, denoted as Pd-MOF, was fabricated and examined for visible light photocatalytic hydrogen evolution reaction (HER). This Pd-MOF can provide a remarkable photocatalytic activity (a H₂ production rate of 21.3 mmol/gh in the visible range), which outperforms recently reported Pt-MOFs (with a H₂ production rate of 6.6 mmol/gh) with a similar noble metal loading. Notably, this high efficiency of Pd-MOF is not due to different chemical environment of the metal center, nor by changes in the spectral light absorption. The higher performance of the Pd-MOF in comparison to the analogue Pt-MOF is attributed to the longer lifetime of the photogenerated electron-hole pairs and higher charge transfer efficiency.