Polymer‐supported palladium: A hybrid system for multifunctional catalytic application

Polymer‐supported palladium was synthesized by applying a single‐step wet chemical synthesis route and the resultant composite material was characterized by means of various techniques. Infrared and UV–visible spectra provided information on the chemical structure of the polymer. Microscopy techniques showed the general morphology of the polymer. The oxidation state of palladium was determined using the X‐ray photoelectron spectroscopy method. The synthesized material was applied as a heterogeneous catalyst for the Heck coupling reaction and also as an electrocatalyst for the oxidation of cysteine.     

Synthesis of iron nanoparticles via chemical reduction with palladium ion seeds

We report on the synthesis of highly monodisperse iron nanoparticles, using a chemical reduction method. Iron nanoparticles with an average diameter of 6 nm and a geometric standard deviation of 1.3 were synthesized at a pH of 9.50 from ferric chloride precursor with sodium borohydride as the reducing agent, polyacrylic acid as the dispersing agent, and palladium ions as seeds for iron nanoparticle nucleation. The resulting nanoparticles were ferromagnetic at 5 K and superparamagnetic at 350 K. The dispersing agent polyacrylic acid (PAA) was shown to prevent iron nanoparticles and possibly palladium clusters from aggregating; in the absence of PAA, only aggregated iron nanoparticles were obtained. The addition of palladium ions decreased the diameter of iron nanoparticles presumably by providing sites for heterogeneous nucleation onto palladium clusters. In the absence of palladium ions, the mean diameter of iron nanoparticles was approximately 110 nm and the standard deviation increased to 2.0. The pH of the solution also was found to have a significant effect on the particle diameter, likely by affecting PAA ionization and altering the conformation of the polymer chains. At lower pH (8.75), the PAA is less ionized and its ability to disperse palladium clusters is reduced, so the number of palladium seeds decreases. Therefore, the resulting iron nanoparticles were larger, 59 nm in diameter, versus 6 nm for nanoparticles formed at a pH of 9.50.     

Highly active Pd nanoparticles dispersed on amine functionalized layered double hydroxide for Suzuki coupling reaction

The synthesis of well dispersed palladium nanoparticles (1-5 nm) on diamine functionalized LDH is reported. The heterogeneous catalyst displayed unprecedented activity in Suzuki coupling reaction.     

Palladium based heterogeneous catalyst by evaporation-induced self-assembly: use of biopolymer as a surface functionalizing and reducing agent

Palladium-based composites are widely used as a heterogeneous catalyst in carbon–carbon coupling reactions and in catalytic converters used in the car industry. In this work, we demonstrate a simple, green and scalable synthesis procedure to obtain palladium (Pd) based heterogeneous catalyst. Surface functionalized silica microparticles were obtained in one-step by spray-drying a colloidal suspension of silica nanoparticles and gum arabic, an environmental-friendly biopolymer. Subsequently, palladium nanoparticles were reduced and attached to the substrate by gum arabic. The as-synthesized composite was characterized by field-emission scanning electron microscopy (FESEM), energy-dispersive x-ray spectroscopy (EDS), x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), small angle x-ray scattering (SAXS), and high-resolution transmission electron microscopy (HR-TEM). The Pd@SiO₂ composite was used as a catalyst in the reduction reaction of 4-nitrophenol by sodium borohydride. The catalyst showed good recycling properties. The present environmental-friendly approach for fabrication of Pd-based heterogeneous catalyst circumvents various complex chemical steps involved in conventional chemical methods and could be generalized for the production of ceramic or magnetite-based Pd composites.     

Fe_3O_4/油酸担载肟衍生环钯配合物中钯粒子作为催化剂催化无铜Sonogashira交联反应（英文）

An oxime-derived palladacycle was synthesized using 4-bromobenzoxime and pyridine in CHCl3, and characterized by FT-IR and 1H NMR spectroscopy. This Pd complex was supported on Fe3O4/oleic acid and shown to be an efficient catalyst for the copper-free Sonogashira cross-coupling reaction of various aryl halides with phenylacetylene in air and in ethanol or mixed aqueous medium. The oxime- derived palladacycle gave highly active palladium nanoparticles for the organic synthesis. The coupling products were obtained in high yields with low Pd loading and the heterogeneous catalyst can be separated by an external magnet and reused six times without loss of its activity. The characterization of the catalyst was carried out by XRD, SEM and TEM. Both TEM and XRD revealed that the palladium nanoparticles were well dispersed with diameters from 5 to 10 nm and average size 9.97 nm.     

The promoting effect of a dicyanamide based ionic liquid in the selective hydrogenation of citral

Conventional supported heterogeneous palladium catalysts in combination with a dicyanamide based ionic liquid are highly active with excellent selectivity in enabling the one-pot synthesis of citronellal through citral hydrogenation.     

Preparation of 2‐Quinolones by Sequential Heck Reduction–Cyclization (HRC) Reactions by Using a Multitask Palladium Catalyst

One‐pot sequential Heck reduction–cyclization (HRC) reactions leading to the synthesis of substituted 2‐quinolones have been developed by using a heterogeneous or mixed homogeneous/heterogeneous multitask palladium catalyst with charcoal as a support. The whole sequence occurs under very mild conditions without the need for additives (ligand or base) by taking advantage of the high reactivity of aryldiazonium salts as “super electrophiles”. Recycling experiments showed that the reused heterogeneous Pd⁰/C catalyst was not able to promote another HRC sequence but was, however, still highly active for hydrogenation, hydrodehalogenation, as well as hydrogenolysis reactions.     

A heterogeneous and reusable nanopolymer-supported palladium catalyst for the copper- and phosphine-free Sonogashira coupling reaction under aerobic conditions in water

We report here the synthesis of a nanopolymer-supported palladium(II) complex catalyst, [PS-tet-Pd(II)] using a simple protocol. The catalyst was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), FT-IR, and energy dispersive X-ray spectroscopy (EDS). PS-tet-Pd(II) proves to be a useful heterogeneous catalyst in the copper- and phosphine-free Sonogashira coupling reaction in water. The catalyst can be recovered from the reaction mixture by simple filtration and reused several times without any significant loss of catalytic activity.     

果胶负载钯催化剂的制备及Suzuki反应催化性能

以柑橘皮果胶为载体,采用吸附法制备了果胶负载钯催化剂,并将其应用于四苯硼钠与溴代芳烃的交叉偶联反应中.该反应体系以聚乙二醇400(PEG 400)/H2O为反应溶剂,三乙胺为碱,在空气中于110℃反应15~60 min,四苯硼钠中4个苯基均可顺利参与反应,高产率地获得相应的目标化合物.该方法具有条件温和、反应时间短、收率高且催化剂可循环利用等优点.     

A convenient and practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with formic acid as carbon monoxide source

A practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with arylboronic acids under carbon monoxide gas‐free conditions has been developed using a bidentate phosphino‐functionalized magnetic nanoparticle‐immobilized palladium(II) complex as catalyst. Formic acid was utilized as the carbon monoxide source with dicyclohexylcarbodiimide as the activator, and a wide variety of biaryl ketones were generated in moderate to high yields. The new heterogeneous palladium catalyst can be prepared via a simple procedure and can easily be separated from a reaction mixture by simply applying an external magnet and recycled up to 10 times without any loss of activity.     

A water-compatible, highly active and reusable PEG-coated mesoporous silica-supported palladium complex and its application in Suzuki coupling reactions

A highly active heterogeneous palladium catalyst was prepared from coated mesoporous materials which contain a layer of readily available PEG with a labile coordinating ability for palladium. The aqueous suspension of the catalyst may be reused several times by simple extraction of the aqueous reaction mixture with ether to remove the product.     

Striking alkenol versus allenol reactivity: metal-catalyzed chemodifferentiating oxycyclization of enallenols

An efficient chemodivergent metal-controlled methodology for the generation of different highly functionalized oxygen heterocycles from common enallenol substrates has been developed. Chemoselectivity control in the O-C functionalization of an enallenol can be achieved through the choice of catalyst: AuCl(3), PdCl(2), and [PtCl(2)(CH(2)=CH(2))](2) exclusively afford dihydrofurans through selective activation of the allenol moiety, whereas FeCl(3) solely gives tetrahydrofurans or tetrahydropyrans through selective activation of the alkenol moiety. We have also shown that a combination of metal-mediated hydroalkoxylation and allenic aminocyclization reactions can lead to a useful preparation of the tetrahydrofuro[3,2-b]piperidine core of the antimalarial alkaloid isofebrifugine. These divergent heterocyclization reactions have been developed experimentally and additionally, their mechanisms have been investigated by a theoretical study.     

Synthesis of acetylene-terminated polymers using supported palladium (II) catalysts

A polymer-bound palladium catalyst was synthesized from palladium diacetate and a single crystal polyethylene having 2,2′-bipyridyl moieties as pendant groups. The resulting material was used in place of a free palladium catalyst in the synthesis of acetylene-terminated resins. Supports other than polyethylen were also tested for their ability to bind palladium and their subsequent activity as catalysts in the synthesis of acetylene-terminated polymers.     

The Design and Synthesis of Novel 2,3‐Dihydrobenzo[f]isoquinolin‐4(1H)‐ones via Sequential Ugi–Heck Reactions by Using an Efficient Heterogeneous Palladium Nanocatalyst

A facile and efficient synthesis of N‐alkyl‐2‐(1, 2 dihydro‐1‐methylene‐4‐oxobenzo[f] isoquinoline‐3(4H)‐yl)‐2‐phenylacetamides is performed by the consecutive, two‐step procedure that consists of Ugi and Heck reactions. The Heck reaction was performed both by homogenous and a designed heterogeneous catalyst. The heterogeneous catalyst is a coordinated palladium to 1, 10‐phenanthroline attached to chitosan@Fe3O4 magnetite nanoparticles, which was shown to be more efficient than the homogenous Pd(OAc)₂/PPh₃ catalyst with good to excellent yields.     

Pd/C: an efficient and heterogeneous protocol for oxidative carbonylation of diols to cyclic carbonate

The present protocol involves highly efficient and practical approach for the synthesis of cyclic carbonate via oxidative carbonylation of diols, glycerol, and its derivatives using Pd/C as a heterogeneous, inexpensive, and recyclable catalyst. The effect of various reaction parameters, such as solvent, base, time, and temperature was investigated and applied for the synthesis of value added cyclic carbonates in a good to excellent yield within shorter reaction time. The developed catalytic system circumvents the use of ligand and dehydrating agent with an additional advantage of palladium catalyst recovery and reuse for up to four consecutive cycles.     

Synthesis of new tetrahydropyridopyrazine derivatives via continuous flow chemistry approach and their spectroscopic characterizations

We report here the synthesis of different substituted tetrahydropyridopyrazine derivatives. This approach of synthesis has been designed in a way that in first simple chloro-amine coupling as an alternative of Buchwald coupling followed by heterogeneous hydrogenation of nitro to give amine and further cyclization of this amine with carboxylic acid was accomplished in a single process with the help of continuous flow hydrogenation reactor. This processing was a generation of hydrogen (in situ) by electrolysis of water molecule and using a pre-packed cartridge of a palladium catalyst. In a further step, LAH was used to reduce lactam to a yielding product as tetrahydropyridopyrazine (TPP) scaffold. Final adducts were obtained using substituted benzoyl and sulfonyl derivatives.     

交联木质素负载钯催化剂的制备及对Heck反应的催化性能研究

以天然木质素为原料, 用甲醛对其进行交联得到了交联木质素, 通过简单的方法合成了负载钯催化剂, 用XPS、 TG、 DTA等对其进行了表征. 该催化剂在空气氛围中能很好的催化乙烯基化合物与芳基碘的Heck反应. 如在较低的温度下(40 ℃)催化丙烯酸与碘苯的反应, 产率高达73.7%, 显示了较高的催化活性. 该催化剂重复使用5次, 产率仍高达90%, 显示该催化剂有良好的重复使用性能.     

POPd/TBAB co-catalyzed Suzuki cross-coupling reaction of heteroaryl chlorides/bromides with 4-fluorophenylboronic acid in water

An organic solvent free and efficient heterogeneous synthesis for bridging heteroaryl halides and 4-fluorophenylboronic acid was studied in aqueous media according to the Suzuki cross-coupling protocol. High yields of heteroaryl-aryl fluorides were successfully obtained with: chloro-/bromo-substituted pyridine, thiophene, indole, and inzole in neat water using palladium phosphinous acid complexes (POPd)/tetrabutylammonium bromide (TBAB) as co-catalysts. A possible mechanism for the heterogeneous coupling reaction is proposed and discussed according to the function of the TBAB interphases. The notable properties of the reported method are highly co-catalytic activity, hetero-atom tolerance, simple separating procedure and little environmental disposal impact.     

Palladium chloride anchored on organic functionalized MCM‐41 as a catalyst for the Heck reaction

Palladium chloride was grafted to amino‐functionalized MCM‐41 to prepare heterogeneous catalysts. XRD, N₂ adsorption–desorption isotherms, IR, ¹³C and ²⁹Si cross‐polarization magic‐angle spinning NMR spectroscopy and XPS techniques were employed to characterize the catalytic materials. The heterogeneous palladium catalyst exhibited excellent catalytic activity for the Heck vinylation of iodobenzene with methyl acrylate, giving 92% yield of methyl cinnamate in the presence of N‐methylpyrrolidone (NMP) and triethylamine (Et₃N). The stability of the heterogeneous catalyst was also studied in detail. The catalytic tests showed that the palladium leaching correlated to solvent, base and palladium loading. The heterogeneous catalyst exhibited excellent stability towards loss of activity and palladium leaching was not observed during six recycles in the presence of toluene and Na₂CO₃. Copyright © 2007 John Wiley & Sons, Ltd.     

Cycloisomerization of 1,6-enynes: asymmetric multistep preparation of a hydrindane framework in water with polymeric catalysts

[Reaction: see text] Cycloisomerization of 1,6-enynes proceeded smoothly in water under heterogeneous conditions in the presence of a palladium complex supported on polystyrene-poly(ethylene glycol) copolymer resin to give the corresponding cyclopentanes with a high level of chemical greenness. Multistep asymmetric synthesis of a hydrindane framework was achieved via palladium-catalyzed asymmetric pi-allylic alkylation, propargylation, and cycloisomerization of 1,6-enynes, where all three steps were performed in water with recyclable polymeric catalysts.