Performance of an optical wideband WDM system considering stimulated Raman scattering,fiber attenuation and chromatic dispersion

The performance of an optical wideband wavelength division multiplexed (WDM) communication system is analyzed considering the effects of stimulated Raman scattering, fiber attenuation and chromatic dispersion. Improved models for the Raman gain and the fiber attenuation constant are proposed, which yield better and reliable performance results of the WDM system. Effect of fiber chromatic dispersion is also investigated and it is observed that dispersion can suitably be selected to overcome the limitations imposed by the stimulated Raman scattering phenomenon.     

Fiber chromatic dispersion measurement based on wavelength-to-time mapping using a femtosecond pulse laser and an optical comb filter

A novel method for the measurement of chromatic dispersion of an optical fiber based on wavelength-to-time mapping using a femtosecond pulse laser (FSPL) and an optical comb filter is proposed and experimentally evaluated. In the proposed approach, the spectrum of an ultrashort optical pulse generated by an FSPL is sliced by an optical comb filter. The spectrum-sliced optical pulse is then coupled into the optical fiber under test. Thanks to the chromatic-dispersion-induced wavelength-to-time mapping in the optical fiber under test, a time-domain waveform similar to the sliced spectrum is generated at the output of the optical fiber, with different frequency components having different time delays. The time delay vs. frequency data are then recorded for the estimation of the chromatic dispersion by using least square fitting. Chromatic dispersions of two types of optical fibers with different lengths are tested. The measured dispersion values agree well with those measured by the conventional modulation phase shift (MPS) method.     

Chromatic dispersion behavior of Si-NC-Er doped optical fiber

The chromatic dispersion for conventional and Er-doped fibers using the refractive index approximation is examined. A first, analytical method for investigation of dispersion in step index triple clad optical fiber is used. To design of zero-dispersion shifted fiber for optical communication purpose manipulation of the refractive index and radius of the core are considered. We show that in presence of the Si-NC-Er ions, zero-dispersion wavelength is displaced and the dispersion quantity is increased. In this work, we try to optimize system parameters to obtain minimum dispersion and dispersion shifted fiber with control of the doping levels of Er ions and Si-NC as well as doping profiles. For especial case, we assumed the Gaussian inhomogeneous core refractive index for zero-dispersion wavelength and dispersion managements.     

Normalized LMS digital filter for chromatic dispersion equalization in 112-Gbit/s PDM-QPSK coherent optical transmission system

High bit rates optical communication systems pose the challenge of their tolerance to linear and non-linear fiber impairments. Coherent optical receivers using digital signal processing techniques can mitigate the fiber impairments in the optical transmission system, including the chromatic dispersion equalization with digital filters. In this paper, an adaptive finite impulse response filter employing normalized least mean square algorithm is developed for compensating the chromatic dispersion in a 112-Gbit/s polarization division multiplexed quadrature phase shift keying coherent communication system, which is established in the VPI simulation platform. The principle of the adaptive normalized least mean square algorithm for signal equalization is analyzed theoretically, and at the meanwhile, the taps number and the tap weights in the adaptive finite impulse response filter for compensating a certain fiber chromatic dispersion are also investigated by numerical simulation. The chromatic dispersion compensation performance of the adaptive filter is analyzed by evaluating the behavior of the bit-error-rate versus the optical signal-to-noise ratio, and the compensation results are also compared with other present digital filters.     

Suppressing chromatic dispersion fluctuation for broadband optical parametric gain in highly nonlinear tellurite microstructured optical fibers

Optical Review - We investigate the effect of chromatic dispersion fluctuation on the performance of fiber optical parametric amplification (FOPA) using tellurite hybrid microstructured optical...     

Generation of optical waveforms in 1.3-μm SOA-based fiber lasers

Passive optical waveform generation is obtained in fiber lasers using a 1.3-μm semiconductor optical amplifier (SOA) as the gain medium. Various waveforms, including square wave, staircase wave, triangular wave, pulse, and dark pulse are generated in SOA-based fiber lasers by adjusting intracavity polarization controllers. The passive waveform generation might be attributed to the SOA gain dynamics and the enhanced nonlinear interaction at the 1.3-μm zero dispersion wavelength of traditional single-mode fiber (SMF), as well as the interference effect between the two sub-cavities of fiber laser. With figure-8 cavity configuration, 1250th-order harmonic pulses have been successfully demonstrated. We have also obtained a free-running SOA-based fiber laser with 3-dB spectral width of 16 nm, and the center wavelength can be tuned over 45 nm range.     

中红外可调谐大能量飞秒脉冲激光产生

可调谐中红外飞秒光纤激光器具有非常普遍的应用,从而引起了人们的广泛关注。目前,非线性光纤中的拉曼孤子自频移效应是实现大范围可调谐飞秒脉冲激光的理想方法之一。然而,非线性光纤中其他高阶非线性效应的产生通常会限制拉曼孤子脉冲的能量提升。本文提出了利用有源掺杂光纤作为非线性介质和增益介质实现可调谐大能量中红外飞秒激光脉冲的方法。在理论上研究了有源掺杂非线性光纤中高阶孤子劈裂和孤子自频移效应的产生,以及线性增益对波长移动拉曼孤子能量、脉宽、光谱的影响。结果表明,通过为波长红移的低能量拉曼孤子提供线性增益,孤子脉冲的能量得到了显著提升且保持了其单脉冲特性,脉冲宽度为45 fs,且孤子脉冲的波长可通过所提供的增益进行大范围调谐。因此,利用有源掺杂光纤作为非线性介质是实现大能量可调谐中红外飞秒脉冲激光的一种有效方法。     

多波长OCDMA系统频谱效率的改善

分析了色散效应对多波长OCDMA系统频谱效率的影响。在相同的扩频因子条件下,色散效应将降低多波长OCDMA系统的频谱效率峰值,同时达到频谱效率峰值的波长信道数也将相应减少。提出了将前向纠错码用于改善多波长OCDMA系统的频谱效率,分析结果表明,该方案将有效改善多波长OCDMA系统的频谱效率,特别是频谱效率峰值将明显提高。     

宽温度范围光纤传输性能温度适应性试验与评价

通过高低温湿热交变试验箱模拟外界温度环境，利用OTDR和CD300色散仪监测光纤传输性能随温度的变化情况，对相同工艺生产的同类型的不同批次的单模光纤进行温度循环试验。试验表明：在－60℃～140℃宽温度范围内，光纤的传输性能均随温度发生波动——在1310nm和1550nm波长处光纤温度附加衰减不超过0.05dB/km；在1550nm处光纤的色散系数随温度升高而降低；PMD随温度的升高有所增加。在该试验的基础上，利用质量管理中的“3σ”控制原理，以现有通信系统标准作为判据，讨论了温度变化时光纤传输性能对通信系统的适应性，推断出在－60℃～140℃温度范围，G.652光纤的衰减、色散和PMD性能均满足10Gbit/s以下的通信系统使用；对于高于10Gbit/s的高速通信系统，应采用适当的措施，尽可能减小拉丝过程中光纤的PMD，这样才能保证PMD指标完全满足高速通信系统要求。     

Analyses of constraints on high speed optical code division multiplexing access (OCDMA) link parameters due to fiber optic chromatic dispersion

In direct sequence-optical code division multiplexing access (DS-OCDMA) system networks, data rate and data spreading technique involved in such systems require a high chip rate. Transmission link in these systems is significantly affected by the fiber chromatic dispersion. In this study, we have developed and employed a simple model to estimate the G652 fiber dispersion effects. OCDMA technique has been employed to investigate fiber chromatic dispersion effects on multiple access interference (MAI). We have found that, at a short optical fiber length, the optical fiber dispersion has a significant impact on the high data rate transmission systems (higher than 750 Mbit/s). The performance and optimization of optical orthogonal code (OOC) in the OCDMA system is reported. We have demonstrated that, for a high data rate, even if dispersion compensated devices are not deployed, the BER can be significantly improved when the OOC desired length is selected. We have shown that when compensation dispersion devices are not deployed in the system, there is a trade off between the limited dispersion effects and the MAI.     

Performance limitations of an optical heterodyne CPFSK transmission system due to self-phase modulation

A detailed theoretical analysis is presented to evaluate the combined influence of self-phase modulation (SPM) and group velocity dispersion (GVD) of optical fiber on the bit error rate (BER) performance of a heterodyne optical CPFSK system. The power penalty suffered by the system due to the combined influence of GVD and SPM is evaluated from the BER performance results. It is found that the penalty due to SPM at a BER of 10⁻⁹ is significant when the input power exceeds 7 dBm. Further, the CPFSK system with modulation index of 0.5 is less sensitive to the effects of GVD and SPM compared to the system with a modulation index of 1. The theoretical results are in conformity with the experimental results reported earlier.     

Measurement of modal dispersion in optical fiber by means of acousto-optic coupling

We show that frequency-wavelength tuning characteristics of acousto-optic coupling can be used for measuring the difference of effective index, group index, and chromatic dispersion between core and cladding modes in single-mode fibers. Chromatic dispersion measurements of a 30-cm-long conventional single-mode fiber, a nonzero dispersion-shifted fiber, and a dispersion-compensating fiber with this new method are presented for the wavelength range 1500-1600 nm. Qualitative agreement with independently measured data is obtained.     

Performance Analysis of High-speed Optical Pulse Transmission in Dispersion-managed Nonlinear Birefringent Fiber Using Quantum Well Laser Diode Sources

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　ＳｉｎｃｅＣ .Ｄ .Ｐｏｏｌｅ ｐｒｏｐｏｓｅｄｐｈｅｎｏｍｅｎｏｌｏｇｉｃａｌａｐｐｒｏａｃｈｔｏａｎａｌｙｚｅｐｏｌａｒｉｚａｔｉｏｎｍｏｄｅｄｉｓｐｅｒｓｉｏｎ (ＰＭＤ) [1] ,ｍａｎｙｍｏｄｅｌｓａｎｄｃａｌｃｕｌａｔｉｏｎｓｏｆＰＭＤｗｅｒｅｄｅｖｅｌｏｐｅｄｉｎＲｅｆ.[2 ].Ｈｏｗｅｖｅｒ,ｍｏｓｔｏｆｔｈｅｍｆｏｃｕｓｅｄｏｎｔｈｅ ｐｕｌｓｅｔｒａｎｓｍｉｓｓｉｏｎｏｆｉｄｅａｌｐｕｌｓｅｓ,ｓｕｃｈａｓｃｏｎｖｅｎｔｉｏｎａｌＧａｕｓｓｉａｎｐｕｌｓｅ ,ｓｅ…     

Mid-infrared supercontinuum generation in a four-hole As2S5 chalcogenide microstructured optical fiber

We demonstrate the supercontinuum (SC) generation in a four-hole As₂S₅ chalcogenide microstructured optical fiber (MOF) experimentally. The As₂S₅ glass has better property of transmission than As₂S₃ glass in the visible range. The four-hole As₂S₅ MOF is fabricated by a rod-in-tube method. The SCs generated by different pump wavelengths at 2,000, 2,300 and 2,500 nm in the MOF whose length is from 2.3 to 20 cm are demonstrated. Those pump wavelengths correspond to the chromatic dispersion wavelength in the normal chromatic dispersion region, the anomalous chromatic dispersion region close to zero-dispersion wavelength (ZDW) and the anomalous chromatic dispersion region far from ZDW, respectively. Wider SCs can be obtained when pumped at a wavelength in the anomalous dispersion region close to ZDW. The widest SC range of 4,280 nm (from 1,370 to 5,650 nm) covering two octaves was obtained in a 4.8-cm-long fiber pumped at 2,300 nm.     

Performance of optical links with optical amplifiers

In this work a comparison between the performances of single and multichannel systems is reported for links with optical amplifiers, considering conventional and soliton signals, Time Division Multiplexing (TDM), and Wavelength Division Multiplexing (WM) techniques. The performance evaluation is obtained by means of numerical simulations taking into account the effects of the chromatic dispersion, the Kerr nonlinearity, and the ASE noise of the optical amplifiers. Both the regimes of constant and fluctuating chromatic dispersion along the link are studied. The possibility of implementing high-capacity optical systems for a high-bandwidth European network is evaluated.     

Performance Analysis of High-speed Optical Pulse Transmission in Dispersion-managed Nonlinear Birefringent Fiber Using Quantum Well Laser Diode Sources

This paper analyzes the high bit-rate optical pulse trasmission in single mode optical fiber with chromatic dispersion, polarization mode dispersion (small random birefringence) and nonlinearity. Numerical method employed can precisely describe their interactive effect on transmission performance. Different dispersion maps and the related performance are analysed. Various simulation results and discussion are given. The results show that chromatic dispersion compensation should be carefully designed. Appropriate dispersion management can also alleviate the effect of polarization mode dispersion.     

Optimum algorithm for WDM channel allocation for reducing four-wave mixing effects

A novel channel allocation method, based on optical Golomb ruler (OGR), that allows reduction of the FWM effect while maintaining bandwidth efficiency along with the algorithms has been presented in this paper. Very high-capacity, long-haul optical communication systems can be designed by wavelength division multiplexing (WDM) of high-bit-rate channels and by using erbium-doped fiber amplifiers (EDFAs) to periodically compensate the fiber loss. In such all-optical systems, the effects of chromatic dispersion and nonlinearities accumulate during light propagation, imposing limits on the achievable performance. Chromatic dispersion at 1.55 pm can be effectively reduced by using dispersion-shifted fiber (DSF). The use of very-low-dispersion fiber, however, enhances the efficiency of generation of four-wave mixing (FWM) waves by reducing the phase mismatch naturally provided by the fiber dispersion. For this reason, crosstalk due to FWM is the dominant nonlinear effect in long-haul WDM systems using DSFs. To reduce four-wave-mixing crosstalk in high capacity long-haul repeater less WDM light wave systems, the use of the channel allocation method that involves unequal spaced channels has been proposed.     

Research on WDM optical fiber transmission system based on fiber Raman amplifier

After wavelength division multiplexing (WDM) optical fiber transmission system based on fiber Raman amplifier (FRA) is investigated in detail, the influence of the collocation of dispersion compensation fiber (DCF), the dispersion coefficient, dispersion slope (DS), effective core area, nonlinear index, length of FRA, launch power and the bandwidth of Bessel filter on bit error rate (BER) is deduced. The influence of Rayleigh backscattering noise on optical signal noise ratio (OSNR) is also investigated, which affects the performance of long haul transmission badly. The result indicates that the broadband long haul transmission can be realized through the reasonable design of the fiber. The result is useful to the optimal design of the WDM optical fiber transmission system based on FRA.     

Passive and temporally continuous optical spectral analyzer of RF signals via wavelength coding

A novel approach realizing an optical spectrum analyzer for photonic detection of an unknown RF carrier signals is presented. The described module may be part of an electronic warfare system in which detection of a narrow band RF signal is required. Moreover, The RF signal is characterized by an unknown time varying carrier frequency embedded in wide band noise. The system uses a passive, fiber based photonic configuration. It allows the spectrum mapping of an incoming electronic RF signal modulated on an optical carrier. The spectral analyzer configuration uses a finite impulse response (FIR) filter that is realized by two different optical paths of parallel fibers which generate a spectral notch filter. Hence, a wavelength coding is realized by chromatic dispersion such that each wavelength is filtered by a different FIR filter. Therefore, the energy at a WDM demux output channels is actually proportional to the spectrum of the input RF signal. This spectral mapping is obtained without lose of temporal RF information.     

Bidirectional radio-over-fiber systems with SSB modulation and wavelength reuse based on injection-locked semiconductor lasers

A 60-GHz bidirectional radio-over-fiber （RoF） system using two-carrier-injected distributed feedback （DFB） laser is proposed and demonstrated to realize optical single sideband （SSB） modulation for downlink.An injection-locked Fabry-P＇erot laser is also carried out to realize wavelength reuse in uplink.Transmission of 2.5 Gb/s on a 60-GHz carrier for downlink and 622-Mb/s baseband signal for uplink are both successfully demonstrated over 50-km single mode fiber without chromatic dispersion compensation.