利用神经网络实现复杂结构的多目标优化设计

结构优化设计中常常包含大量的有限元计算。现代多目标优化设计的发展趋势是以 Pareto遗传算法为代表的随机搜索方法 ,能够搜索到整个 Pareto最优解集 ,但计算量相当大 ,如果每次迭代都要涉及有限元计算 ,将是非常耗时的工作。本文在利用 Kolm ogorov多层神经网络映射存在定理的基础上导出的用神经网络进行结构近似分析的方法 ,用均匀试验设计方法选取特征样本点供神经网络训练 ,将神经网络与 Pareto遗传算法有机地结合 ,使多目标优化的计算效率进一步提高     

基于iSIGHT平台的主轴箱多目标优化设计

针对工程实际中复杂的多目标优化设计问题,常遇到性能目标与设计变量之间不具有显式的函数关系式,难以直接运用优化方法进行设计计算,因此提出基于i SIGHT平台的多目标集成优化设计方法。以主轴箱多目标优化设计问题为例,在i SIGHT平台上集成ANSYS软件并进行建模和分析,采用响应面法构建近似模型,利用邻域培植遗传算法获得多目标优化问题的Pareto最优解集,根据工程实际的不同需求,从中选出最合适的优化方案。     

基于Isight平台的房车空调送风参数优化

为了提高房车空调夏季降温效果，对房车空调的送风温度、速度、角度进行优化研究。利用CFD方法对房车内流场进行数值模拟。应用k-e RNG湍流模型，合理的设置热力学边界条件，并引入太阳辐射模型。以Isight软件为优化平台集成Fluent软件搭建房车夏季降温多目标优化设计流程。通过最优拉丁超立方试验设计方法设计样本点，采用径向基函数神经网络建立近似模型，并结合NCGA遗传算法对不同送风参数进行多目标优化。在Pareto最优解集中选取最优折衷解，并通过CFD仿真和房车静态温度实验对比验证。结果表明：建立的近似模型能很好取代内流场仿真进行多目标优化，优化后的结果使房车内部能够获得更好的气流组织形式，温度场、速度场更加合理。     

基于近似模型的高速列车头型多目标优化设计

为改善高速列车气动性能,建立一套高效的多目标气动优化设计方法,对流线型头型进行多目标气动优化设计。建立高速列车流线型头型三维参数化模型,并提取5个优化设计变量;为减少优化设计时间,利用最优拉丁超立方设计方法在优化设计空间中进行均匀采样,利用计算流体力学方法获得对应于各个采样点的气动载荷,利用Kriging代理模型构建优化设计变量和气动载荷之间的近似模型;利用多体系统动力学方法计算气动载荷作用下的高速列车轮重减载率;以气动阻力和轮重减载率为优化目标,利用多目标遗传算法NSGA-II对高速列车流线型头型进行多目标优化。优化设计变量和优化目标均呈现收敛的趋势,采用Kriging近似模型优化计算的Pareto前沿与采用CFD（Computational fluid dynamics,CFD）优化计算的Pareto前沿较为接近。优化后高速列车的气动阻力最多可降低3.27%,轮重减载率最多可降低1.44%,气动阻力最优的头型与轮重减载率最优的头型的主要差异在于中部辅助控制线的变化,前者向内凹,后者则向外凸。     

基于Pareto挖掘的白车身侧碰安全件轻量化优化设计

为提高白车身轻量化优化效果,提出了熵权灰色关联分析法用于挖掘非支配Pareto解集中的最优解。建立了白车身及整车侧碰有限元模型,通过实车侧碰试验验证了所建模型的准确性。以侧碰安全件料厚为设计变量,综合考虑白车身弯扭刚度、振动频率等基本静-动态性能及侧碰安全性能,构建径向基函数神经网络结合Kriging（RBFNN-Kriging）混合近似模型并联合第二代非支配排序遗传算法（NSGA-Ⅱ算法）进行了多目标优化。最后,提出了熵权灰色关联分析法计算所有非支配Pareto解的灰色关联度,并以此为评价指标进行多目标决策。优化决策结果表明：在满足白车身性能设计基线的要求下,白车身侧碰安全件质量减小了2.68 kg,取得了较好的轻量化效果。     

基于Pareto解集的多目标优化方法及其应用

针对传统多目标优化设计方法的弱点，基于Pareto概念，借助遗传算法所具有的并行搜索特性，引入群体排序技术、小生境技术求得多目标优化问题的Pareto解集，实现了先寻优后决策的求解模式。实际工程算例表明，该模式可同时获得多个Pareto最优解，据此决策能有效弱化设计人员先验知识不足的影响，因而较传统多目标优化方法更为实用有效。     

基于BP-NSGA的注塑参数多目标智能优化设计

为获得成型性能最优的注塑参数设计方案,提出了基于BP神经网络和非支配排序遗传算法的注塑参数多目标优化方法。将注塑模结构尺寸参数和注塑工艺参数作为待优化的设计变量,建立了以高质量、低成本、高效率为优化目标的注塑参数优化设计模型。基于非支配排序遗传算法获取给定参数范围内的所有Pareto最优解,并通过建立多输入和多输出的BP神经网络来快速获得非支配排序遗传算法优化进程中所有个体的适应度值。开发了基于BP神经网络与非支配排序遗传算法集成的注塑参数智能优化设计系统,并通过鼠标注塑参数设计实例,验证了其适用性和有效性。     

基于遗传退火算法的装配线设计多目标优化方法

针对混装配线设计这一有约束的多目标优化问题，建立了数学模型。将基于Pareto的解的分级方法与Lp-范数形式的非线性机制相组合，构建了基于遗传退火算法多目标优化方法。重点阐述了个体编码、染色体检修、多目标处理机制等关键技术。设计了算法流程图，并开发了优化程序。该方法克服了加权和方法的不足，用模拟退火改善了遗传算法全局寻优性能。计算实例表明，随着迭代次数的增加，每代的非受控点逐渐收敛于Pareto最优边界，是一种混装线设计多目标优化的新方法。     

基于多目标遗传算法的直升机总体参数优化设计

应用多目标优化问题中Pareto最优解集的概念,提出了一种基于多目标遗传算法的直升机总体参数优化设计方法。算法引入了个体的序和密度的概念,改进了变异操作算子,使用精英策略,确保能够搜索到具有较高贴近性、均匀性和完整性的Pareto解集。以UH-1H直升机为优化算例的计算结果表明:多目标遗传算法适用于解决多目标优化问题,能够改善Pareto解的质量和均匀性分布。     

基于多目标优化的乘用车后排座椅轻量化设计

提出第二代非劣排序遗传算法(NSGA-II)结合响应面法(RSM)-径向基神经网络方法(RBF)混合近似模型和逼近理想解排序(TOPSIS)方法对某乘用车后排座椅进行结构-材料一体化多目标轻量化设计研究。结合有限元理论建立仿真模型,并通过行李箱碰撞试验验证仿真模型的正确性,根据工程经验和座椅靠背骨架吸能分析确定了6个优化部件厚度、材料的设计变量及取值范围;采用RSM-RBF混合近似模型方法拟合设计变量与响应之间的关系;利用NSGA-Ⅱ算法对优化问题进行求解,得到Pareto最优解集。最后采用基于熵权TOPSIS方法对Pareto最优解集进行排序确定最佳折中解。结果表明:在满足各项安全性能法规的前提下,乘用车后排座椅减重3.57 kg。     

Minimal Realization of Linear Graph Models for Multi-physics Systems

An engineering system may consist of several different types of components,belonging to such physical"domains"as mechanical,electrical,fluid,and thermal.It is t...     

Non-monotonic material contrast in scanning ion and scanning electron images

30 keV Ga⁺ focused ion beam induced secondary electron (iSE) imaging was used to determine the relative contrast between several materials. The iSE signal compared from C, Si, Al, Ti, Cr, Ni, Cu, Mo, Ag, and W metal layers does not decrease with an increase in target atomic number Z₂, and shows a non-monotonic relationship between contrast and Z₂. The non-monotonic relationship is attributed to periodic fluctuations of the stopping power and sputter yield inherent to the ion–solid interactions. In addition, material contrast from electron-induced secondary electron (eSE) and backscattered electron (BSE) images using scanning electron microscopy (SEM) also shows non-monotonic contrast as a function of Z₂, following the periodic behavior of the stopping power for electron–solid interactions. A comparison of the iSE and eSE results shows similar relative contrast between the metal layers, and not complementary contrast as conventionally understood. These similarities in the contrast behavior can be attributed to similarities in the periodic and non-monotonic function defined by incident particle–solid interaction theory.     

Application of Feature Extraction through Convolution Neural Networks and SVM Classifier for Robust Grading of Apples

This paper proposes a novel grading method of apples,in an automated grading device that uses convolutional neural networks to extract the size,color,texture,an...     

分布动态载荷识别的抗噪处理

针对正交多项式频域法在用多种响应对矩形薄板进行载荷识别中抗噪性较差的问题,综合运用平均法、矩阵预处理和奇异值截断法等方法对之进行改善,并引入空间映射的思想,将该方法的应用范围拓展为复杂的模型.利用仿真算例,证实了该方法具有较好的抗噪性.     

基于MELTAC-N平台的核电厂安全级DCS环网研究与测试

针对工程实践中环网通讯相关问题的处理缺乏理论基础及国产化安全级DCS平台的开发缺乏成熟经验借鉴问题,对基于MELTAC-N平台核电厂安全级DCS环网的软硬件实现进行了研究。提出了安全级DCS环网双环网冗余设计、光切换开关设计等硬件设计方法,以及以RPR协议为基础,采用全数据收发策略的软件设计方法。在CPR1000安全级DCS平台上对安全级DCS环网的可靠性及实时性进行了评价,并进行了容错能力、响应时间及响应时间稳定性测试验证实验。结果表明,基于MELTAC-N平台安全级DCS环网软硬件设计具有较好的容错能力及响应时间稳定性。     

The laboratory simulation of abrasive wear

Abrasive wear has long been recognised as one of the most potentially serious tribological problems facing the operators of many types of plant and machinery; several industrial surveys have indicated that wear by abrasion can be responsible for more than 50% of unscheduled machine and plant stoppages. Locating the operating point of a tribological contact in an appropriate operational ‚map’︁ can provide a useful guide to the likely nature and origins of the surface degradation experienced in use, though care must be exercised in choosing the most suitable parameters for the axes of the plot. Laboratory testing of materials and simulations of machine contacts are carried out for a number of purposes; at one level for the very practical aims of ranking candidate materials or surface hardening treatments in order of their wear resistance, or in an attempt to predict wear lives under field conditions. More fundamentally, tests may be aimed at elucidating the essential physical mechanisms of surface damage and loss, with the longer term aim of building an analytical and predictive model of the wear process itself. In many cases, component surface damage is brought about by the ingress of hard, particulate matter into machine bearing or sealing clearances. These may be running dry although, more usually, a lubricant or service fluid is present at the interface. A number of standardised wear test geometries and procedures have been established for both two- and three-body wear situations, and these are briefly described. Although abrasive wear is often modelled as following an ‚Archard’︁ equation (i.e. a linear increase in material loss with both load and time, and an inverse dependence on specimen hardness) both industrial experience and laboratory tests of particularly lubricated contacts show that this is not always the case: increasing the hardness differential in an abrasively contaminated lubricated pair may not always reduce the rate of damage to the harder surface.     

Limits of topographic measurement by the scanning tunnelling and atomic force microscopes

Parameters describing the topographic character of a surface (height, surface wavelength, slope and curvature) can be derived from equivalent sinusoidal profiles. The response of a surface-measuring instrument may be modelled in terms of instrument parameters such as stylus radius, and scanning range and resolution. The performance of the instrument may then be mapped as a zone in amplitude-wavelength (AW) space to show the sinusoidal profiles it is capable of measuring. In a first-order analysis the STM and AFM are considered as equivalent to contact-stylus instruments with a notional stylus radius equal to the tip radius plus the gap. Comparisons between different instruments and types of instrument are readily made by mapping in AW space. The error arising from convolution of the sinusoidal profile with that of the finite tip may be quantified and plotted as contours in AW space.     

Fractional order nonsingular terminal sliding mode control for flexible spacecraft attitude tracking

This paper investigates a fractional terminal sliding mode control for flexible spacecraft attitude tracking in the presence of inertia uncertainties and extern...     

奥氏体不锈钢表面双辉等离子渗锆的动力学

利用双辉等离子渗金属技术在0Cr18Ni9Ti奥氏体不锈钢表面制备了一层均匀、致密、呈良好冶金结合的渗锆合金层,并对1 060℃下的渗锆动力学进行了研究。结果表明:随着距锆合金层表面距离的增加,锆元素的含量呈梯度递减,扩散系数逐渐减小,而扩散激活能逐步增大;在1 060℃采用双辉等离子技术渗锆时,渗锆合金层表层的空位密度为2.945×(1012~1013)cm-2,与相同温度下采用常规渗金属工艺相比,提高了1~2个数量级。     

气化炉三维扫描测量与数据处理

以德士古气化炉耐火砖的内壁蚀损检测设备为基础,对采集到的点云数据做了进一步处理.通过对数据的筛选和剔除,实现了数据点的平滑降噪细化和精简.然后利用点云对整、网格划分和分色显示等方法,最终完成了内壁腐蚀情况的三维建模.重点讨论了点云数据的预处理及后处理的方法,并根据内壁耐火砖的腐蚀阈值,提出了一种气化炉内壁腐蚀区域的识别与分割方法.对耐火砖的腐蚀分析、气化炉的生产与维修提供了可靠依据,并在工程应用中获得了一致认可.