新型厌氧处理反应器的发展及应用

厌氧反应器是应用于污水处理的一种生物处理系统。因其运行费用低，能耗少且可产生有用副产物等优点在世界范围内得到了广泛的研究与应用。本文对厌氧反应器的由来，发展与应用进行了较系统的论述，重点介绍了新型厌氧反应器的研究与应用前景；认为目前应用的是以高速厌氧反应器为代表的工艺，但必须提高系统的稳定性，缩短系统的启动周期；同时应完善适宜于处理需高温厌氧处理的废水，低浓度有机废水以及高浓度有毒物质废水的反应器。新方法或新材料如膜技术的应用以及分级“多相”厌氧反应器可能在将来的废水处理中发挥作用。此外厌氧反应器与其他废水处理系统组成的厌氧－好氧系统，厌氧－湿地系统等综合处理系统更拓展了其应用范围。在我国这样能源短缺，资金不足的发展中, 有效又价廉的厌氧处理反应器特别适合我国国情。     

上流式厌氧污泥床（UASB）反应器在污水处理中的应用

本文介绍了现代高效厌氧污泥床(UASB)反应器在处理工业污水和生活污水中的研究与应用。并阐述了该装置对低浓度和中等浓度的不同污水中的厌氧处理;及低温20℃和中温30℃的运行结果。本装置技术简单,易在我国推广,对环境保护及可再生能源回收是可行的技术。     

厌氧反应器技术研究开发情况简介

本文分析了厌氧反应器技术的发展过程,着重介绍了几种新型第三代厌氧反应器技术的原理和应用现状,以及我国目前对这些技术的研究开展情况,其中:升流式厌氧污泥床过滤器(UBF)研究取得了一定的成功经验;垂直折流厌氧污泥床反应器(VBASBR)缺乏应用生产实例;厌氧折流反应器(ABR)已有成功经验;内循环反应器(IC)还只限于部分废水的处理;膨胀颗粒污泥床反应器(ECSB)尚未有规模的生产投入使用。     

内循环(IC)厌氧反应器在废水处理中的应用

介绍了内循环(IC)厌氧反应器的基本原理,分析了IC厌氧反应器的工艺特点,即IC厌氧反应器是新型高效厌氧生物反应器,扼述了IC厌氧反应器在废水处理中的应用进展及前景。     

内循环（1C）厌氧反应器在废水处理中的应用

介绍了内循环（IC）厌氧反应器的基本原理,分析了IC厌氧反应器的工艺特点,即IC厌氧反应器是新型高效厌氧生物反应器,扼述了IC厌氧反应器在废水处理中的应用进展及前景。     

升流式厌氧污泥床反应器处理工艺研究

对厌氧反应器在生物处理废水中的应用进行了探讨,着重论述了升流式厌氧污泥反应床的整体结构、反应机理、工艺特点以及其成功操作的影响因素。     

碱度对UASB处理淀粉废水影响的研究

通过UASB中试装置对淀粉废水处理工艺中不同碱度对UASB反应器中的碱度和酸化的影响的研究,论述了减少碱度投加的途径和酸化的预防与系统恢复.补充碱度可以防止酸化,使反应器处于良好运行状况.通过控制运行条件可以有效降低厌氧处理中碱度需求,在最大程度上降低厌氧处理运行费用.阐述了日常监测的方法,以及预防酸化的产生的途径.     

荷兰废水厌氧处理技术与科研进展考察

本文在简要地报道了赴西欧荷兰考察废水厌氧处理技术和科研进展概况后,重点介绍高效厌氧工艺UASB(上流式厌氧污泥床)的设计特点、研究进展和在(?)水厌氧处理中生产规模虚用情况与UASB反应器相匹配的关键生物枝术—高活性厌氧污泥颗粒化研究应用进展,有关颗粒污泥形状、类型、微生物组成、形成机理及厌氧活性污泥颗粒化的主要影响因素等,希望能借鉴国外先进厌氧工艺UASB及其厌氧颗粒化污泥培养技术应用于我国废水厌氧处理中,为提高我国废水厌氧消化技术水平提供参考。     

MBR处理工艺的发展与应用

MBR处理技术目前发展的新工艺有：改良式序列间歇反应器（MSBR）、MBR与氧化沟结合工艺、MBR与高效生物反应器相结合（MHCR）等。MBR技术推广应用的关键是解决膜污染问题和降低膜成本。MBR技术已经在水处理领域应用,和常规水处理工艺相比,MBR工艺具有处理效果好、出水水质稳定,设备简单、占地空间省等优势,对于发展城市污水回用具有重要意义。     

螺旋升流反应器氧传递性能的试验研究

本文主要针对螺旋升流反应器技术特性，对工艺的好氧反应器进行了氧传递性能的试验研究，考察了反应器水深、曝气量等对螺旋升流反应器氧转移过程的影响；并对试验数据进行回归，得到了氧传质总系数与螺旋升流反应器内表现气速的数学关系。试验结果表明，螺旋升流反应器具有良好的氧传递特性，是一种新型的高效、节能的污水处理反应技术。     

Preliminary evaluation of the electrochemical and chemical coagulation processes in the post-treatment of effluent from an upflow anaerobic sludge blanket (UASB) reactor

The main objective of this paper was to perform a preliminary comparative study between chemical and electrochemical coagulation processes, both followed by flocculation and sedimentation of an effluent from an upflow anaerobic sludge blanket (UASB) reactor treating simulated wastewater from an unbleached Kraft pulp mill. The electrochemical treatment removed up to 67% (with aluminum electrodes) and 82% (with stainless-steel electrodes) of the remaining chemical oxygen demand (COD) and 84% (stainless steel) and 98% (aluminum) of the color in the wastewater. These efficiencies were achieved with an energy consumption ranging from 14 to 20 Wh l(-1). The coagulation-flocculation treatment with ferric chloride and aluminum sulfate removed up to 87% and 90% of COD and 94% and 98% of color, respectively. The addition of a high molecular weight cationic polymer enhanced both COD and color removal efficiencies. The two post-treatment processes proved to be technically feasible; however the economical feasibility could not be assessed since the experiments were performed with small reactors that could distort scale factors.     

Modeling of the denitrification/anaerobic digestion process of salmon fishery wastewater in a biofilm tubular reactor

The literature has paid scarce attention to the modeling of the denitrification-anaerobic digestion process in packed bed biofilm tubular reactors used to treat wastewater. The present study obtained a steady-state model for industrial salmon fishery wastewater treatment in a biofilm tubular reactor, including pH as a variable and the effect of biomass on hydrolysis. The axial profile of the reactor components and process efficiency were predicted with deviations below 6%. The optimal operating zone for the process was found at hydraulic retention time (HRT)>1.5d and inlet protein concentration (S(prot,0))<3000 mgTOCL(-1). Based on our results, we concluded that the removal of organic matter and nitrogen compounds depended mainly on HRT. The effluent pH was mainly affected by the C/N ratio, where a decrease increases pH. Organic matter removal was related with the anaerobic digestion process, while denitrification influenced mostly nitrate and nitrite removal.     

An overview on biogas generation from anaerobic digestion of food waste

Food waste is an inevitable type of waste in every city, and its treatment technology evolves with time. Due to the high organic content and high biodegradability of food waste, anaerobic digestion becomes a commonly accepted treatment method to deal with it. This review article summarizes key factors for anaerobic digestion and provides useful information for successful anaerobic digestions. Reasonable temperature and pH are essential for a successful and productive anaerobic digestion process. A good inoculum to substrate ratio triggers a profitable food waste digestion. Good mixing and small particle sizes are important factors too. In addition, the pros and cons of different reactors to food waste digestion are highlighted. Moreover, co-digestion of food waste with animal manures, sewage sludge, and green waste were introduced.     

Improvement of fruit and vegetable waste anaerobic digestion performance and stability with co-substrates addition

The effect of fish waste (FW), abattoir wastewater (AW) and waste activated sludge (WAS) addition as co-substrates on the fruit and vegetable waste (FVW) anaerobic digestion performance was investigated under mesophilic conditions using four anaerobic sequencing batch reactors (ASBR) with the aim of finding the better co-substrate for the enhanced performance of co-digestion. The reactors were operated at an organic loading rate of 2.46–2.51 g volatile solids (VS) l⁻¹ d⁻¹, of which approximately 90% were from FVW, and a hydraulic retention time of 10 days. It was observed that AW and WAS additions with a ratio of 10% VS enhanced biogas yield by 51.5% and 43.8% and total volatile solids removal by 10% and 11.7%, respectively. However FW addition led to improvement of the process stability, as indicated by the low VFAs/Alkalinity ratio of 0.28, and permitted anaerobic digestion of FVW without chemical alkali addition. Despite a considerable decrease in the C/N ratio from 34.2 to 27.6, the addition of FW slightly improved the gas production yield (8.1%) compared to anaerobic digestion of FVW alone. A C/N ratio between 22 and 25 seemed to be better for anaerobic co-digestion of FVW with its co-substrates. The most significant factor for enhanced FVW digestion performance was the improved organic nitrogen content provided by the additional wastes. Consequently, the occurrence of an imbalance between the different groups of anaerobic bacteria which may take place in unstable anaerobic digestion of FVW could be prevented.     

厌氧-好氧工艺在含油废水生化处理中的应用

(中国石油冀东油田分公司安全环保处)论述了厌氧-好氧(A/O)工艺的基本原理及工艺参数。该工艺在冀东油田两座废水处理站的应用结果表明,对废水中石油类物质、COD、硫化物去除效果明显。高一联合站及柳一联合站污水经处理后,石油类物质去除率分别为90.6%和96.0%;COD去除率分别为86.0%和91.6%;硫化物去除率分别为94.8%和98.2%,处理后的污水均达到一级排放标准。另外,采用厌氧-好氧工艺的成本相对较低,处理费用低于0.5元/m3。处理后的污水若回注地下,平均费用为4.7元/m3。     

太阳光催化反应器的研究进展

以太阳光为光源的光催化氧化技术是一种清洁和节能的污水处理技术。对廉价和高效的太阳光催化反应器的设计和放大是这项技术研究的关键,也是实现工业化应用的重要因素。结合近几年国外对太阳光催化反应器的研究,详细地讨论了目前几种太阳光催化反应器的发展及应用研究,比较了不同反应器的优缺点,同时提出一些建议和今后的研究方向。     

Reduction of pathogen indicator organisms in dairy wastewater using an ecological treatment system

Ecological treatment systems can provide a sustainable, plant-based alternative to traditional wastewater treatment. One factor essential to the success of these systems is ensuring their ability to reduce coliform concentrations in wastewater. Wastewater is the primary source of fecal contamination in aquatic ecosystems, containing total and fecal coliforms on the order of 10(8)-10(10) and 10(7)-10(9) CFU L(-1), respectively. This study assessed the ability of an ecological treatment system to reduce concentrations of total coliforms and Escherichia coli from dairy wastewater. Low strength wastewater was pumped into the system during July of 2005 and high strength in September 2005. Wastewater passes through a series of anaerobic, aerobic, and clarifier reactors and wetland cells before exiting the system. Regardless of wastewater strength, average total coliform and E. coli concentrations were consistently reduced by at least 99% from influent to effluent, with the majority of the reduction (76%) occurring in the first two reactors. Relationships between internal concentrations of solids and coliforms indicated that increased reduction of solids may further reduce coliform concentrations. Although U.S. Environmental Protection Agency discharge requirements for E. coli were not always met, the substantial reductions achieved indicate that ecological treatment systems have the potential to successfully reduce coliforms in wastewater to meet discharge limits. The results from this study will be used to guide design and management of future ecological treatment systems, so that larger and more consistent coliform reductions can be achieved.     

利用缺氧反硝化处理难降解有机物的探讨

本文研究了厌氧、缺氧实验夺件下难降解苯、甲苯、乙苯、二甲苯的同分异构体（BTEX）的生物降解性能。得出了不同底物的厌氧降解变化情况和缺氧降解条件下不同底物适宜的C／N比。通过对实验结果的分析，初步确定了不同底物具有各不相同的C／N比的原因，同时得出了缺氧反硝化与厌氧生物降解过程有可能同时发生的结论。     

污泥高固体厌氧消化研究进展

厌氧消化是实现污泥的减量化、稳定化和资源化的重要手段,相对于传统的低浓度污泥厌氧消化工艺高固体污泥厌氧消化可以直接利用污水处理厂排放的脱水污泥,具有设施体积小、单位容积产气率较高和水耗及能耗较低等优势。本文综述了近年来污泥高固体消化的研究进展,从污泥高固体厌氧消化的基本特征出发,总结了污泥高固体厌氧消化的影响因素和对反应器的要求;同时对污泥高固体消化存在的搅拌不匀、传质传热困难、有机质降解率偏低、搅拌系统不成熟等问题作了简要分析,这些问题都还有待于深入研究解决。