Gas Diffusion,Energy Transport,and Thermal Accommodation in Single‐Walled Carbon Nanotube Aerogels

The thermal conductivity of gas‐permeated single‐walled carbon nanotube (SWCNT) aerogel (8 kg m^?3 density, 0.0061 volume fraction) is measured experimentally and modeled using mesoscale and atomistic simulations. Despite the high thermal conductivity of isolated SWCNTs, the thermal conductivity of the evacuated aerogel is 0.025 ± 0.010 W m^?1 K^?1 at a temperature of 300 K. This very low value is a result of the high porosity and the low interface thermal conductance at the tube–tube junctions (estimated as 12 pW K^?1). Thermal conductivity measurements and analysis of the gas‐permeated aerogel (H₂, He, Ne, N₂, and Ar) show that gas molecules transport energy over length scales hundreds of times larger than the diameters of the pores in the aerogel. It is hypothesized that inefficient energy exchange between gas molecules and SWCNTs gives the permeating molecules a memory of their prior collisions. Low gas‐SWCNT accommodation coefficients predicted by molecular dynamics simulations support this hypothesis. Amplified energy transport length scales resulting from low gas accommodation are a general feature of CNT‐based nanoporous materials.     

Electrochemical Properties of High‐Power Supercapacitors Using Single‐Walled Carbon Nanotube Electrodes

We have investigated the key factors determining the performance of supercapacitors constructed using single‐walled carbon nanotube (SWNT) electrodes. Several parameters, such as composition of the binder, annealing temperature, type of current collector, charging time, and discharging current density have been optimized for the best performance of the supercapacitor with respect to energy density and power density. We find a maximum specific capacitance of 180 F/g and a measured power density of 20 kW/kg at energy densities in the range from 7 to 6.5 Wh/kg at 0.9 V in a solution of 7.5 N KOH (the currently available supercapacitors have energy densities in the range 6–7 Wh/kg and power density in the range 0.2–5 kW/kg at 2.3 V in non‐aqueous solvents).     

Charged Rod‐Like Nanoparticles Assisting Single‐Walled Carbon Nanotube Dispersion in Water

A new dispersant for stabilization of single wall carbon nanotubes (SWNTs) in water that simultaneously utilizes three different dispersion or stabilization mechanisms: surfactant adsorption, polymeric wrapping, and Coulomb repulsive interaction, has been demonstrated. The new dispersant, a charged rod‐like nanoparticle (cROD), is a cylindrical micelle wrapped by negatively charged polymers which is fabricated by the aqueous free radical polymerization of a polymerizable cationic surfactant, cetyltrimethylammonium 4‐vinylbenzoate (CTVB), in the presence of sodium 4‐styrenesulfonate (NaSS). The surface charge density of the cRODs is controlled by varying the concentration of NaSS. Dispersions of SWNTs are obtained by sonicating a mixture of SWNTs and cROD in water, followed by ultra‐centrifugation and decanting. While the cRODs with neutral or low surface change densities (0 and 5 mol % NaSS) result in very low dispersion power and poor stability, the cRODs with high surface charge densities (15, 25, and 40 mol % NaSS) produce excellent dispersions with SWNT concentration as high as 437 mg L^?1 and long term stability. The sharp van Hove transition peaks of the cROD assisted SWNT dispersions indicate the presence of individually isolated SWNTs. Atomic force microscopy and small angle neutron scattering analysis show that the dominant encapsulation structure of the cROD assisted SWNTs is surfactant assisted polymeric wrapping. SWNTs dispersed by the cRODs can be fully dried and easily re‐dispersed in water, providing enhanced processibility of SWNTs.     

Octadecylamine‐Functionalized Single‐Walled Carbon Nanotubes for Facilitating the Formation of a Monolithic Perovskite Layer and Stable Solar Cells

Organic–inorganic lead halide perovskites have shown great future for application in solar cells owing to their exceptional optical and electronic properties. To achieve high‐performance perovskite solar cells, a perovskite light absorbing layer with large grains is desirable in order to minimize grain boundaries and recombination during the operation of the device. Herein, a simple yet efficient approach is developed to synthesize perovskite films consisting of monolithic‐like grains with micrometer size through in situ deposition of octadecylamine functionalized single‐walled carbon nanotubes (ODA‐SWCNTs) onto the surface of the perovskite layer. The ODA‐SWCNTs form a capping layer that controls the evaporation rate of organic solvents in the perovskite film during the postthermal treatment. This favorable morphology in turn dramatically enhances the short‐circuit current density of the perovskite solar cells and almost completely eliminates the hysteresis. A maximum power conversion efficiency of 16.1% is achieved with an ODA‐SWCNT incorporated planar solar cell using (FA_0.83MA_0.17)_0.95Cs_0.05Pb(I_0.83Br_0.17)₃ as light absorber. Furthermore, the perovskite solar cells with ODA‐SWCNT demonstrate extraordinary stability with performance retention of 80% after 45 d stability testing under high humidity (60–90%) environment. This work opens up a new avenue for morphology manipulation of perovskite films and enhances the device stability using carbon material.     

Carbon Fiber–Bismaleimide Composites Filled with Nickel‐Coated Single‐Walled Carbon Nanotubes for Lightning‐Strike Protection

Multifunctional carbon fiber composites are imperative for next‐generation lightweight aircraft structures. However, lightning‐strike protection is a feature that is lacking in many modern carbon fiber high‐temperature polymer systems, due to their high electrical resistivity. This work presents a study on processing, materials optimization, and property development of high‐temperature bismaleimide (BMI)–carbon fiber composites filled with nickel‐coated single‐walled carbon nanotubes (Ni‐SWNTs) based on three key factors: i) dispersion of Ni‐SWNTs, ii) their surface coverage on the carbon plies and, iii) the composite surface resistivity. Atomic force microscopy analysis revealed that coating purified SWNTs with nickel enabled improved dispersion which resulted in uniform surface coverage on the carbon plies. The electrical resistivity of the baseline composite system was reduced by ten orders of magnitude by the addition of 4 wt% Ni‐SWNTs (calculated with respect to the weight of a single carbon ply). Ni‐SWNT–filled composites showed a reduced amount of damage to simulated lightning strike compared to their unfilled counterparts, as indicated by the minimal carbon fiber pull‐out.     

Light‐Switchable Single‐Walled Carbon Nanotubes Based on Host–Guest Chemistry

A new type of light‐switchable “smart” single‐walled carbon nanotube (SWNTs) is developed by the reversible host–guest interaction between azobenzene‐terminal PEO (AzoPEO) and pyrene‐labeled host attached on the sidewalls of nanotubes via π–π stacking. The SWNTs hybrids not only are well dispersed in pure water, but also exhibit switchable dispersion/aggregation states upon the alternate irradiation of UV and visible light. Moreover, the SWNTs hybrids dispersion is preliminarily used as coating fluid to form transparent conductive films. The dispersant AzoPEO is removed by the contamination‐free UV treatment, decreasing the resistance of the films. This kind of light‐switchable SWNTs hybrids, possessing a ‘‘green’’ trigger and intact structure of the nanotube, may find potential applications in sensor of biomedicines, device fabrication, etc. Additionally, such a reversible host–guest interaction system may open up the possibility to control the dispersion state of SWNTs by other common polymers.     

High‐Strength Laminated Copper Matrix Nanocomposites Developed from a Single‐Walled Carbon Nanotube Film with Continuous Reticulate Architecture

A critical challenge in nanocomposite fabrication by adding SWCNTs as reinforcement is to realize an effective transfer of the excellent mechanical properties of the SWCNTs to the macroscale mechanical properties of the matrix. Using directly grown SWCNT films with continuous reticulate structure as the template, Cu/SWCNTs/Cu laminated nanocomposites are fabricated by an electrodepositing process. The resulting Cu/SWCNTs/Cu laminated nanocomposites exhibit extremely high strength and Young's modulus. The estimated Young's modulus of the SWCNT bundles in the composite are between 860 and 960 GPa. Such a high strength and an effective load‐transfer capacity are ascribed to the unique continuous reticulate architecture of SWCNT films and the strong interfacial strength between the SWCNTs and Cu matrix. Raman spectroscopy is used to characterize the loading status of the SWCNTs in the strained composite. It provides a route to investigate the load transfer of SWCNTs in the metal matrix composites.     

Engineering the Thermal Conductivity of Functional Phase‐Change Materials for Heat Energy Conversion,Storage, and Utilization

Thermal energy storage technologies based on phase‐change materials (PCMs) have received tremendous attention in recent years. These materials are capable of reversibly storing large amounts of thermal energy during the isothermal phase transition and offer enormous potential in the development of state‐of‐the‐art renewable energy infrastructure. Thermal conductivity plays a vital role in regulating the thermal charging and discharging rate of PCMs and improving the heat‐utilization efficiency. The strategies for tuning the thermal conductivity of PCMs and their potential energy applications, such as thermal energy harvesting and storage, thermal management of batteries, thermal diodes, and other forms of energy utilization, are summarized systematically. Furthermore, a research perspective is given to highlight emerging research directions of engineering advanced functional PCMs for energy applications.     

Spin‐ and Spray‐Deposited Single‐Walled Carbon‐Nanotube Electrodes for Organic Solar Cells

Organic bulk‐heterojunction solar cells using thin‐film single‐walled carbon‐nanotube (SWCNT) anodes deposited on glass are reported. Two types of SWCNT films are investigated: spin‐coated films from dichloroethane (DCE), and spray‐coated films from deionized water using sodium dodecyl sulphate (SDS) or sodium dodecyl benzene sulphonate (SDBS) as the surfactant. All of the films are found to be mechanically robust, with no tendency to delaminate from the underlying substrate during handling. Acid treatment with HNO₃ yields high conductivities >1000 S cm^?1 for all of the films, with values of up to 7694 ± 800 S cm^?1 being obtained when using SDS as the surfactant. Sheet resistances of around 100 Ω sq^?1 are obtained at reasonable transmission, for example, 128 ± 2 Ω sq^?1 at 90% for DCE, 57 ± 3 Ω sq^?1 at 65% for H₂O:SDS, and 68 ± 5 Ω sq^?1 at 70% for H₂O:SDBS. Solar cells are fabricated by successively coating the SWCNT films with poly(3,4‐ethylenedioxythiophene):poly(styrene sulphonate) (PEDOT:PSS), a blend of regioregular poly(3‐hexylthiophene) (P3HT) and 1‐(3‐methoxy‐carbonyl)‐propyl‐1‐phenyl‐(6,6)C₆₁ (PCBM), and LiF/Al. The resultant devices have respective power conversions of 2.3, 2.2 and 1.2% for DCE, H₂O:SDS and H₂O:SDBS, with the first two being at a virtual parity with reference devices using ITO‐coated glass as the anode (2.3%).     

Polyazines and Polyazomethines with Didodecylthiophene Units for Selective Dispersion of Semiconducting Single‐Walled Carbon Nanotubes

Polymer wrapped single‐walled carbon nanotubes (SWNTs) have been demonstrated to be a very efficient technique to obtain high purity semiconducting SWNT solutions. However, the extraction yield of this technique is low compared to other techniques. Poly‐alkyl‐thiophenes have been reported to show higher extraction yield compare to polyfluorene derivatives. Here, the affinity for semiconducting SWNTs of two polymers with a backbone containing didodecylthiophene units interspersed with N atoms is reported. It is demonstrated that one of the polymers, namely, poly(2,5‐dimethylidynenitrilo‐3,4‐didodecylthienylene) (PAMDD), has very high semiconducting SWNT extraction yield compared to the poly(3,4‐didodecylthienylene)azine (PAZDD). The dissimilar wrapping efficiency of these two polymers for semiconducting SWNTs is attributed to the interplay between the affinity for the nitrogen atoms of the highly polarizable walls of SWNTs and the mechanical flexibility of the polymer backbones. Photoluminescence (PL) measurements demonstrate the presence of metallic tubes and SWNT bundles in the sample selected with PAZDD and higher purity of SWNT‐PAMDD samples. The high purity of the semiconducting SWNTs selected by PAMDD is further demonstrated by the high performance of the solution‐processed field‐effect transistors (FETs) fabricated using a blade coating technique, which exhibit hole mobilities up to 33.3 cm² V^?1 s^?1 with on/off ratios of 10⁶.     

Covalent Surface Modification Effects on Single‐Walled Carbon Nanotubes for Targeted Sensing and Optical Imaging

Optical nanoscale technologies often implement covalent or noncovalent strategies for the modification of nanoparticles, whereby both functionalizations are leveraged for multimodal applications but can affect the intrinsic fluorescence of nanoparticles. Specifically, single‐walled carbon nanotubes (SWCNTs) can enable real‐time imaging and cellular delivery; however, the introduction of covalent SWCNT sidewall functionalizations often attenuates SWCNT fluorescence. Recent advances in SWCNT covalent functionalization chemistries preserve the SWCNT's pristine graphitic lattice and intrinsic fluorescence, and here, such covalently functionalized SWCNTs maintain intrinsic fluorescence‐based molecular recognition of neurotransmitter and protein analytes. The covalently modified SWCNT nanosensor preserves its fluorescence response towards its analyte for certain nanosensors, presumably dependent on the intermolecular interactions between SWCNTs or the steric hindrance introduced by the covalent functionalization that hinders noncovalent interactions with the SWCNT surface. These SWCNT nanosensors are further functionalized via their covalent handles with a targeting ligand, biotin, to self‐assemble on passivated microscopy slides, and these dual‐functionalized SWCNT materials are explored for future use in multiplexed sensing and imaging applications.     

Nitrogen‐Doped Single‐Walled Carbon Nanotubes Grown on Substrates: Evidence for Framework Doping and Their Enhanced Properties

Nitrogen‐doped single‐walled carbon nanotubes (SWCNTs) are synthesized directly on silicon and quartz substrates through a normal chemical vapor deposition (CVD) method. Thermogravimetry mass spectrometry measurements and Raman spectroscopy give firm evidence for framework nitrogen doping. X‐ray‐photoelectron‐spectroscopy analysis further obtains the bonding style of the nitrogen atoms in the carbon framework. The nitrogen doping significantly changes the properties of the SWCNTs. All of the tubes behave like metallic tubes in field‐effect transistors. The doped nitrogen atoms introduce a stronger affinity for the SWCNTs to metal nanoparticles. Compared with pristine SWCNTs, the nitrogen‐doped tubes show enhanced sensitivity and selectivity for electrochemical detection of some electrophilic species including O₂, H₂O₂, and Fe³⁺. They also present improved electrocatalytic activity for oxygen reduction. These unique properties of the nitrogen‐doped SWCNTs endow them with important potential applications in various fields.     

A Polymer/Carbon‐Nanotube Ink as a Boron‐Dopant/Inorganic‐Passivation Free Carrier Selective Contact for Silicon Solar Cells with over 21% Efficiency

Traditional silicon solar cells extract holes and achieve interface passivation with the use of a boron dopant and dielectric thin films such as silicon oxide or hydrogenated amorphous silicon. Without these two key components, few technologies have realized power conversion efficiencies above 20%. Here, a carbon nanotube ink is spin coated directly onto a silicon wafer to serve simultaneously as a hole extraction layer, but also to passivate interfacial defects. This enables a low‐cost fabrication process that is absent of vacuum equipment and high‐temperatures. Power conversion efficiencies of 21.4% on an device area of 4.8 cm² and 20% on an industrial size (245.71 cm²) wafer are obtained. Additionally, the high quality of this passivated carrier selective contact affords a fill factor of 82%, which is a record for silicon solar cells with dopant‐free contacts. The combination of low‐dimensional materials with an organic passivation is a new strategy to high performance photovoltaics.     

Protamine Functionalized Single‐Walled Carbon Nanotubes for Stem Cell Labeling and In Vivo Raman/Magnetic Resonance/Photoacoustic Triple‐Modal Imaging

Stem cells have shown great potential in regenerative medicine and attracted tremendous interests in recent years. Sensitive and reliable methods for stem cell labeling and in vivo tracking are thus urgently needed. Here, a novel approach to label human mesenchymal stem cells (hMSCs) with single‐walled carbon nanotubes (SWNTs) for in vivo tracking by triple‐modal imaging is presented. It is shown that polyethylene glycol (PEG) functionalized SWNTs conjugated with protamine (SWNT‐PEG‐PRO) exhibit extremely efficient cell entry into hMSCs, without affecting their proliferation and differentiation. The strong inherent resonance Raman scattering of SWNTs is used for in vitro and in vivo Raman imaging of SWNT‐PEG‐PRO‐labeled hMSCs, enabling ultrasensitive in vivo detection of as few as 500 stem cells administrated into mice. On the other hand, the metallic catalyst nanoparticles attached on nanotubes can be utilized as the T2‐contrast agent in magnetic resonance (MR) imaging of SWNT‐labeled hMSCs. Moreover, in vivo photoacoustic imaging of hMSCs in mice is also demonstrated. The work reveals that SWNTs with appropriate surface functionalization have the potential to serve as multifunctional nanoprobes for stem cell labeling and multi‐modal in vivo tracking.     

Control of Current Hysteresis of Networked Single‐Walled Carbon Nanotube Transistors by a Ferroelectric Polymer Gate Insulator

Films made of 2D networks of single‐walled carbon nanotubes (SWNTs) are one of the most promising active‐channel materials for field‐effect transistors (FETs) and have a variety of flexible electronic applications, ranging from biological and chemical sensors to high‐speed switching devices. Challenges, however, still remain due to the current hysteresis of SWNT‐containing FETs, which has hindered further development. A new and robust method to control the current hysteresis of a SWNT‐network FET is presented, which involves the non‐volatile polarization of a ferroelectric poly(vinylidene fluoride‐trifluoroethylene) (P(VDF‐TrFE)) gate insulator. A top‐gate FET with a solution‐processed SWNT‐network exhibits significant suppression of the hysteresis when the gate‐voltage sweep is greater than the coercive field of the ferroelectric polymer layer (≈50 MV m^?1). These near‐hysteresis‐free characteristics are believed to be due to the characteristic hysteresis of the P(VDF‐TrFE), resulting from its non‐volatile polarization, which makes effective compensation for the current hysteresis of the SWNT‐network FETs. The onset voltage for hysteresis‐minimized operation is able to be tuned simply by controlling the thickness of the ferroelectric film, which opens the possibility of operating hysteresis‐free devices with gate voltages down to a few volts.     

Mesoporous Silica Coated Single‐Walled Carbon Nanotubes as a Multifunctional Light‐Responsive Platform for Cancer Combination Therapy

The development of cancer combination therapies, many of which rely on nanoscale theranostic agents, has received increasing attention in recent years. In this work, polyethylene glycol (PEG) modified mesoporous silica (MS) coated single‐walled carbon nanotubes (SWNTs) are fabricated and utilized as a multifunctional platform for imaging guided combination therapy of cancer. A model chemotherapy drug, doxorubicin (DOX), could be loaded into the mesoporous structure of the obtained SWNT@MS‐PEG nano‐carriers with high efficiency. Upon stimulation under near‐infrared (NIR) light, photothermally triggered drug release from DOX loaded SWNT@MS‐PEG is observed inside cells, resulting in a synergistic cancer cell killing effect. As revealed by both photoacoustic (PA) and magnetic resonance (MR) imaging, we further uncover efficient tumor accumulation of SWNT@MS‐PEG/DOX after intravenous injection into mice. In vivo combination therapy using this agent is further demonstrated in a mouse tumor model, achieving a remarkable synergistic anti‐tumor effect superior to that obtained by mono‐therapy. Our work presents a new type of theranostic nano‐platform, which could load therapeutic molecules with high efficiency, be responsive to external NIR stimulation, and at the same time serve as a diagnostic imaging agent.     

Gallium Sulfide–Single‐Walled Carbon Nanotube Composites: High‐Performance Anodes for Lithium‐Ion Batteries

Metal sulfides are an important class of functional materials possessing exceptional electrochemical performance and thus hold great promise for rechargeable secondary batteries. In this work, we deposited gallium sulfide (GaS_x, x = 1.2) thin films by atomic layer deposition (ALD) onto single‐walled carbon nanotube (SWCNT) powders. The ALD GaS_x was performed at 150 °C, and produced uniform and conformal amorphous films. The resulting core‐shell, nanostructured SWCNT‐GaS_x composite exhibited excellent electrochemical performance as an anode material for lithium‐ion batteries (LIBs), yielding a stable capacity of ≈575 mA g^–1 at a current density of 120 mA g^–1 in the voltage window of 0.01–2 V, and an exceptional columbic efficiency of >99.7%. The GaS_x component of the composite produced a specific capacity of 766 mA g^–1, a value two times that of conventional graphite anodes. We attribute the excellent electrochemical performance of the composite to four synergistic effects: 1) the uniform and conformal ALD GaS_x coating offers short electronic and Li‐ion pathways during cycling; 2) the amorphous structure of the ALD GaS_x accommodates stress during lithiation‐delithiation processes; 3) the mechanically robust SWCNT framework also accommodates stress from cycling; 4) the SWCNT matrix provides a continuous, high conductivity network.