The Bani Ghayy group; sedimentation and volcanism in pull-apart grabens of the Najd strike-slip orogen,Saudi Arabian shield

The cratonisation of the Arabian Shield involved the accretion of ensimatic arc terranes in the west and south followed by continental collisions along the Nabitah and Al Amar sutures and the onset of the Najd strike-slip orogen. Volcanosedimentary successions which post-date these collisions have been proposed as the products of magmatism in transitional volcanic arcs. One such succession, the Bani Ghayy group, lies unconformably above a series of volcanosedimentary rocks associated with an older active continental margin and was deposited in three separate, elongate, fault-bounded grabens. Each graben contains coarse fanglomerate and fan delta deposits along the margin and proximal greywackes toward the centre. Reef limestones occur locally whereas volcanogenic rocks are widespread. The latter are geochemically bimodal and with the sediments are typical of continental rifting environments although deformed ultramafic rocks within internal reverse faults suggests that the grabens were floored, in part, by primitive mantle derived crust. Deposition of the Bani Ghayy group post-dates incipient motions along fractures of the Najd fault system. The orientation of the Bani Ghayy grabens and the geometry of the boundary faults are consistent with development in a regime of northwest-trending dextral shear. However, the Bani Ghayy grabens are displaced and deformed by later movements of the same faults but in a sinistral sense. Other successions correlated with the Bani Ghayy also preserve features consistent with deposition in continental grabens and the possibility that they represent arc volcanism is discounted.     

Reactivated strike–slip faults: examples from north Cornwall, UK

Several strike–slip faults at Crackington Haven, UK show evidence of right-lateral movement with tip cracks and dilatational jogs, which have been reactivated by left-lateral strike–slip movement. Evidence for reactivation includes two slickenside striae on a single fault surface, two groups of tip cracks with different orientations and very low displacement gradients or negative (left-lateral) displacements at fault tips.

Evidence for the relative age of the two strike–slip movements is (1) the first formed tip cracks associated with right-lateral slip are deformed, whereas the tip cracks formed during left-lateral slip show no deformation; (2) some of the tip cracks associated with right-lateral movement show left-lateral reactivation; and (3) left-lateral displacement is commonly recorded at the tips of dominantly right-lateral faults.

The orientation of the tip cracks to the main fault is 30–70° clockwise for right-lateral slip, and 20–40° counter-clockwise for left-lateral slip. The structure formed by this process of strike–slip reactivation is termed a “tree structure” because it is similar to a tree with branches. The angular difference between these two groups of tip cracks could be interpreted as due to different stress distribution (e.g., transtensional/transpressional, near-field or far-field stress), different fracture modes or fractures utilizing pre-existing planes of weakness.

Most of the d–x profiles have similar patterns, which show low or negative displacement at the segment fault tips. Although the d–x profiles are complicated by fault segments and reactivation, they provide clear evidence for reactivation. Profiles that experienced two opposite slip movements show various shapes depending on the amount of displacement and the slip sequence. For a larger slip followed by a smaller slip with opposite sense, the profile would be expected to record very low or reverse displacement at fault tips due to late-stage tip propagation. Whereas for a smaller slip followed by larger slip with opposite sense, the d–x profile would be flatter with no reverse displacement at the tips. Reactivation also decreases the ratio of d_max/L since for an original right-lateral fault, left lateral reactivation will reduce the net displacement (d_max) along a fault and increase the fault length (L).

Finally we compare Crackington Haven faults with these in the Atacama system of northern Chile. The Salar Grande Fault (SGF) formed as a left-lateral fault with large displacement in its central region. Later right-lateral reactivation is preserved at the fault tips and at the smaller sub-parallel Cerro Chuculay Fault. These faults resemble those seen at Crackington Haven.     

Temporal variation in the geometry of a strike–slip fault zone: Examples from the Dead Sea Transform

The location of the active fault strands along the Dead Sea Transform fault zone (DST) changed through time. In the western margins of Dead Sea basin, the early activity began a few kilometers west of the preset shores and moved toward the center of the basin in four stages. Similar centerward migration of faulting is apparent in the Hula Valley north of the Sea of Galilee as well as in the Negev and the Sinai Peninsula. In the Arava Valley, seismic surveys reveal a series of buried inactive basins whereas the current active strand is on their eastern margins. In the central Arava the centerward migration of activity was followed by outward migration with Pleistocene faulting along NNE-trending faults nearly 50 km west of the center. Largely the faulting along the DST, which began in the early–middle Miocene over a wide zone of up to 50 km, became localized by the end of the Miocene. The subsidence of fault-controlled basins, which were active in the early stage, stopped at the end of the Miocene. Later during the Plio-Pleistocene new faults were formed in the Negev west of the main transform. They indicate that another cycle has begun with the widening of the fault zone. It is suggested that the localization of faulting goes on as long as there is no change in the stress field. The stresses change because the geometry of the plates must change as they move, and consequently the localization stage ends. The fault zone is rearranged, becomes wide, and a new localization stage begins as slip accumulates. It is hypothesized that alternating periods of widening and narrowing correlate to changes of the plate boundaries, manifest in different Euler poles.     

Tectonic evolution of kid metamorphic complex and the recognition of Najd fault system in South East Sinai,Egypt

International Journal of Earth Sciences - A low-to medium-grade metamorphic belt of a volcano-sedimentary succession occurs in the eastern side of South Sinai as a part of the northernmost...     

Interplay between stress permutations and overpressure to cause strike‐slip faulting during tectonic inversion

Field data from an orogenic foreland and an orogenic belt (the Mesozoic rocks of southern England and the Umbria‐Marche Apennines of Italy respectively) indicate the following. Firstly, stress evolution during the tectonic cycle, between maximum compressive stress (σ₁) being vertical during extension and least compressive stress (σ₃) being vertical during contraction, can involve phases when the intermediate compressive stress (σ₂) is vertical, promoting strike‐slip deformation. Secondly, variations in the relative magnitudes of the stress axes are caused by variations in overburden and tectonic forces. Thirdly, overpressure can develop because of compaction during burial, and, as overburden is reduced during uplift and erosion, the vertical stress (σ_V) reduces but fluid pressure (P_f) remains approximately constant. Brittle deformation, including transient strike‐slip faults, reverse‐reactivated normal faults and normal‐reactivated thrusts, is preferentially developed in overpressured areas because high P_f promotes faulting.     

Formation of sequential basins along a strike–slip fault–Geophysical observations from the Dead Sea basin

The Dead Sea basin is often cited as one of the classic examples for the evolution of pull-apart basins along strike–slip faults. Despite its significance, the internal structure of the northern Dead Sea basin has never been addressed conclusively. In order to produce the first comprehensive, high-resolution analysis of this area, all available seismic data from the northern Dead Sea (lake)–lower Jordan valley (land) were combined. Results show that the northern Dead Sea basin is comprised of a system of tectonically controlled sub-basins delimited by the converging Western and Eastern boundary faults of the Dead Sea fault valley. These sub-basins grow shallower and smaller to the north and are separated by structural saddles marking the location of active transverse faults. The sedimentary fill within the sub-basins was found to be relatively thicker than previously interpreted. As a result of the findings of this study, the “classic” model for the development of pull-aparts, based on the Dead Sea, is revised. The new comprehensive compilation of data produced here for the first time was used to improve upon existing conceptual models and may advance the understanding of similar basinal systems elsewhere.     

Factors controlling the vegetation distribution and coal‐forming environments in a strike‐slip basin. The Pennsylvanian Peñarroya‐Belmez‐Espiel Basin,southern Spain

Coal‐forming environments require humid to perhumid conditions. Tectonics governs the size, location and availability of coal seams developed in such environments. While large Pennsylvanian paralic basins generated thick and continuous coal seams, many other small coeval basins, which were tectonically active, developed a puzzling succession, with carbonaceous deposits that varied in size, thickness and the nature of the coal‐forming flora. This study, conducted in the Peñarroya‐Belmez‐Espiel coalfield, a Variscan strike‐slip basin in the south of Spain, provides insights into this subject. The coal seams analysed, generated in different depositional environments, have quantitatively different palynological assemblages. Lacustrine coals are dominated by lycopsids; distal alluvial plain/marginal lacustrine coals are dominated by sphenophytes and tree ferns, and middle alluvial fan coals are dominated by sphenophytes, tree ferns and lycopsids. This means that when conditions were favourable for peat accumulation, peat accumulated regardless of the nature of the available flora.     

The Kirsh gneiss dome: an extensional metamorphic core complex from the SE Arabian Shield

A number of gneiss-cored domes and antiforms are exposed along the regional strike-slip Najd fault system in the Arabian Shield and the eastern desert of Egypt. The mode of origin is still controversial, although plausible comparisons with modern metamorphic core complexes were made in some well-studied areas. The Kirsh dome is located within the major Ar Rika shear zone and consists of a core of orthogneiss/migmatite and an envelope of paragneisses with locally abundant kyanite-bearing quartzites. The dome is surrounded by the low-grade metasediments of the Murdama Group and is bound from the south by a low-angle dip-slip fault. Beyond the southern strand of the Ar Rika Fault is the Kibdi Basin which hosts unmetamorphosed sediments belonging to the Jibalah Group; this group occupies scattered pull-apart basins closely associated with releasing bends along the Najd fault system. Little dating has been done on the gneiss domes of the Arabian Shield; however, recent dates from similar structures in the eastern desert and Sinai range from 580 to 620?Ma. A similar, albeit younger ⁴⁰Ar/³⁹Ar age of 557?±?15?Ma was obtained from a biotite paragneiss south of Jabal Kirsh; this age difference probably represent the time interval it took the Kirsh rocks to cool below the biotite closure temperature and would place a lower age limit for the dome. The Kirsh dome occupies an extensional zone between left-stepping faults; movement within this zone might have caused enough decompression to trigger fluid-absent melting in the middle crust especially as the rocks cross the biotite dehydration solidus. Diapiric ascent aided by strike-slip dilatancy pumping led to the emplacement of the Kirsh rocks in their present position within the Murdama Group metasediments.     

Transfer of stress from the 2004 Mw9.2 Sumatra subduction earthquake promoted widespread seismicity and large strike‐slip events in the Wharton Basin

The 2004 Mw9.2 Sumatra and 2012 Mw8.6 Wharton Basin (WB) earthquakes provide the unprecedented opportunity to investigate stress transfer from a megathrust earthquake to the subducting plate. Comprehensive analyses of this study revealed that the 2004 earthquake excited widespread seismicity in the WB, especially in regions of calculated stress increase greater than 0.3 bars. The 2004 earthquake stressed all three rupture planes of the 2012 Mw8.6 strike‐slip mainshock and the largest Mw8.2 aftershock with mean values of Coulomb stress between 0.3 and 2.1 bars. For the 77 Mw ≥ 4 regional events since 2012, at least one nodal plane for 95% of the events, and both nodal planes for 72% of the events experienced stress increase due to the 2004 earthquake. Results of the analyses also revealed that the regional stress directions in the WB may have controlled the sub‐fault orientations of the 2012 Mw8.6 strike‐slip earthquake.     

Co‐seismic deformation and post‐glacial slip rate along the Magallanes‐Fagnano fault,Tierra Del Fuego,Argentina

Across the extreme south of Patagonia, the Magallanes‐Fagnano Fault (MFF) accommodates the left‐lateral relative motion between South America and Scotia plates. In this paper, we present an updated view of the geometry of the eastern portion of the MFF outcropping in Tierra del Fuego. We subdivide the MFF in eight segments on the basis of their deformation styles, using field mapping and interpretation of high‐resolution imagery. We quantify coseismic ruptures of the strongest recorded 1949, M_w7.5 earthquake, and determine its eastern termination. We recognize several co‐seismic offsets in man‐made features showing a sinistral shift up to 6.5 m, greater than previously estimated. Using ¹⁰Be cosmogenic nuclides depth profiles, we date a cumulated offset in post‐glacial morphologies and estimate the long‐term slip rate of the eastern MFF. We quantify a 6.4 ± 0.9 mm/a left‐lateral fault slip rate, which overlaps geodetic velocity and suggests stable fault behaviour since Pleistocene.     

A tectonic model for the Tertiary evolution of strike–slip faults and rift basins in SE Asia

Models for the Tertiary evolution of SE Asia fall into two main types: a pure escape tectonics model with no proto-South China Sea, and subduction of proto-South China Sea oceanic crust beneath Borneo. A related problem is which, if any, of the main strike–slip faults (Mae Ping, Three Pagodas and Aliao Shan–Red River (ASRR)) cross Sundaland to the NW Borneo margin to facilitate continental extrusion? Recent results investigating strike–slip faults, rift basins, and metamorphic core complexes are reviewed and a revised tectonic model for SE Asia proposed. Key points of the new model include: (1) The ASRR shear zone was mainly active in the Eocene–Oligocene in order to link with extension in the South China Sea. The ASRR was less active during the Miocene (tens of kilometres of sinistral displacement), with minor amounts of South China Sea spreading centre extension transferred to the ASRR shear zone. (2) At least three important regions of metamorphic core complex development affected Indochina from the Oligocene–Miocene (Mogok gneiss belt; Doi Inthanon and Doi Suthep; around the ASRR shear zone). Hence, Paleogene crustal thickening, buoyancy-driven crustal collapse, and lower crustal flow are important elements of the Tertiary evolution of Indochina. (3) Subduction of a proto-South China Sea oceanic crust during the Eocene–Early Miocene is necessary to explain the geological evolution of NW Borneo and must be built into any model for the region. (4) The Eocene–Oligocene collision of NE India with Burma activated extrusion tectonics along the Three Pagodas, Mae Ping, Ranong and Klong Marui faults and right lateral motion along the Sumatran subduction zone. (5) The only strike–slip fault link to the NW Borneo margin occurred along the trend of the ASRR fault system, which passes along strike into a right lateral transform system including the Baram line.     

Fault–valve action and vein development during strike–slip faulting: An example from the Ribeira Shear Zone, Southeastern Brazil

Fluid inclusion microthermometry and structural data are presented for quartz vein systems of a major dextral transcurrent shear zone of Neoproterozoic–Cambrian age in the Ribeira River Valley area, southeastern Brazil. Geometric and microstructural constraints indicate that foliation–parallel and extensional veins were formed during dextral strike–slip faulting. Both vein systems are formed essentially by quartz and lesser contents of sulfides and carbonates, and were crystallized in the presence of CO₂–CH₄ and H₂O–CO₂–CH₄–NaCl immiscible fluids following unmixing from a homogeneous parental fluid. Contrasting fluid entrapment conditions indicate that the two vein systems were formed in different structural levels. Foliation–parallel veins were precipitated beneath the seismogenic zone under pressure fluctuating from moderately sublithostatic to moderately subhydrostatic values (319–397 °C and 47–215 MPa), which is compatible with predicted fluid pressure cycle curves derived from fault–valve action. Growth of extensional veins occurred in shallower structural levels, under pressure fluctuating from near hydrostatic to moderately subhydrostatic values (207–218 °C and 18–74 MPa), which indicate that precipitation occurred within the near surface hydrostatically pressured seismogenic zone. Fluid immiscibility and precipitation of quartz in foliation–parallel veins resulted from fluid pressure drop immediately after earthquake rupture. Fluid immiscibility following a local pressure drop during extensional veining occurred in pre-seismic stages in response to the development of fracture porosity in the dilatant zone. Late stages of fluid circulation within the fault zone are represented dominantly by low to high salinity (0.2 to 44 wt.% equivalent NaCl) H₂O–NaCl–CaCl₂ fluid inclusions trapped in healed fractures mainly in foliation–parallel veins, which also exhibit subordinate H₂O–NaCl–CaCl₂, CO₂–(CH₄) and H₂O–CO₂–(CH₄)–NaCl fluid inclusions trapped under subsolvus conditions in single healed microcracks. Recurrent circulation of aqueous–carbonic fluids and aqueous fluids of highly contrasting salinities during veining and post-veining stages suggests that fluids of different reservoirs were pumped to the ruptured fault zone during faulting episodes. A fluid evolution trending toward CH₄ depletion for CO₂–CH₄–bearing fluids and salinity depletion and dilution (approximation of the system H₂O–NaCl) for aqueous–saline fluids occurred concomitantly with decrease in temperature and pressure related to fluid entrapment in progressively shallower structural levels reflecting the shear zone exhumation history.     

Geochronological constraints on Caledonian strike–slip displacement in Svalbard,with implications for the evolution of the Arctic

The timing of Svalbard's assembly in relation to the mid‐Paleozoic Caledonian collision between Baltica and Laurentia remains contentious. The Svalbard archipelago consists of three basement provinces bounded by N–S‐trending strike–slip faults whose displacement histories are poorly understood. Here, we report microstructural and mineral chemistry data integrated with ⁴⁰Ar/³⁹Ar muscovite geochronology from the sinistral Vimsodden‐Kosibapasset Shear Zone (VKSZ, southwest Svalbard) and explore its relationship to adjacent structures and regional deformation within the circum‐Arctic. Our results indicate that strike–slip displacement along the VKSZ occurred in late Silurian–Early Devonian and was contemporaneous with the beginning of the main phase of continental collision in Greenland and Scandinavia and the onset of syn‐orogenic sedimentation in Silurian–Devonian fault‐controlled basins in northern Svalbard. These new‐age constraints highlight possible links between escape tectonics in the Caledonian orogen and mid‐Paleozoic terrane transfer across the northern margin of Laurentia.     

The najd fault system revisited; a two-way strike-slip orogen in the saudi arabian shield

The Najd strike-slip fault system extends over the northeastern Arabian Shield in a zone >1200 km in length and >300 km wide. Faults trend NW-SE with strike lengths >500 km but small sinistral displacements of <25 km. Cumulative displacement across the zone is >240 km. Najd faults were active in the late Proterozoic and post-date cratonization of the Shield. Associated secondary structures include grabens, thrust faults, folds and dike swarms. In the southwest of the Najd system, near Zalm, initial faulting was dextral and began earlier than formerly thought. Emplacement of a plutonic complex was controlled by Najd fractures of dextral geometry and displacements. The same fractures were active before and after deposition of a group of volcanosedimentary rocks in grabens orientated consistently with development in a dextral strike-slip regime. Graben deformation was controlled by sinistral motion along the same fractures responsible for graben development and also by younger fractures of sinistral geometry and displacement. Dike swarms in the area are also consistent with early dextral and later sinistral shear of Najd trend. Structures in the Zalm area occur throughout the Najd system and the consistent chronology of older dextral structures dislocated and deformed by younger sinistral faults suggests a reversal in the sense of motion of the Najd system as a whole.     

A middle–late Ediacaran volcano‐sedimentary record from the eastern Arabian‐Nubian shield

The Ediacaran Jibalah Group comprises volcano‐sedimentary successions that filled small fault‐bound basins along the NW–SE‐trending Najd fault system in the eastern Arabian‐Nubian Shield. Like several other Jibalah basins, the Antaq basin contains exquisitely preserved sedimentary structures and felsic tuffs, and hence is an excellent candidate for calibrating late Ediacaran Earth history. Shallow‐marine strata from the upper Jibalah Group (Muraykhah Formation) contain a diversity of load structures and intimately related textured organic (microbial) surfaces, along with a fragment of a structure closely resembling an Ediacaran frond fossil and a possible specimen of Aspidella. Interspersed carbonate beds through the Muraykhah Formation record a positive δ¹³C shift from ?6 to 0‰. U‐Pb zircon geochronology indicates a maximum depositional age of ~570 Ma for the upper Jibalah Group, consistent with previous age estimates. Although this age overlaps with that of the upper Huqf Supergroup in nearby Oman, these sequences were deposited in contrasting tectonic settings on opposite sides of the final suture of the East African Orogen.     

Active strike–slip faulting and macroscopically nonrigid deformation of volcanic rocks in central Japan inferred from a paleomagnetic study

Detailed paleomagnetic investigation of a pyroclastic flow deposit has clarified the deformation mode around an active fault. In central Japan, the early Quaternary Nyukawa Pyroclastic Flow Deposit is cut by the active dextral Enako fault. Activity level of the fault is evaluated on the basis of geological and geomorphological surveys. Then, paleomagnetic samples are collected from 22 sites at exposures located on a lineament that is adjoining and parallel to the Enako fault. Stable thermoremanent magnetization (TRM) of the pyroclastic deposit is isolated through progressive thermal and/or alternating field demagnetization tests. Untilted site-mean directions of the TRMs simultaneously acquired during initial cooling indicate significant clockwise vertical-axis rotation. The lineament was then activated with right-lateral motions through the early Quaternary. Together with the late Quaternary activities along the adjoining Enako fault evaluated by our study, the present result exemplifies a migration of active segments within a fault system during the Quaternary. Paleomagnetic directions on the strike–slip fault are not concordant with uniform deformation predicted by the model of rotation of rigid blocks aligned on a master fault, but suggestive of a periodic deformation as a result of intense fracturing and differential rotation of blocks bounded by nested parallel faults.