共聚酯PEIT-PEG结构与性能的研究

PET与PEG共聚可改善PET的抗静电性，但PEG含量的增加，会使共聚物的结晶温度大幅度地降低，不利于纤维加工，且伴随着结晶的发生，纤维的抗静电性也受到影响。在共聚体系中添加间苯二甲酸(IPA)，不仅能破坏大分子链结构的规整性、降低共聚酯的结晶性，而且能提高共聚酯纤雏的抗静电性能。用DSC与TG对共聚酯(PEIT-PEG)的聚集态结构、热性能、结晶性能等进行了表征。     

二醚型 Ziegler-Natta 催化剂催化丙烯与极性单体共聚

 以三乙基铝 (TEA) 为保护剂, 研究了 TiCl4/MgCl2/芴二醚/Al(C2H5)3 体系催化丙烯与十一烯醇或十一烯酸的共聚反应. 结果表明, 在极性单体存在下, 聚合反应活性随极性单体加入量的增加而降低, 但可保持丙烯均聚活性的一半以上, 反应活性衰减较小. 同时, 随着极性单体加入量的增加, 极性单体在共聚物中的含量增加. 与十一烯酸相比, 十一烯醇共聚具有更高的共聚活性和共单体含量. 随着共聚物中极性单体含量的增加, 聚合物的熔点和结晶温度都有所降低. 反应温度对丙烯和十一烯醇共聚的反应活性和共单体含量影响较小.     

共聚酯PEIT-PEG结晶性能的研究

通过偏光显微镜、广角X衍射与FTIR三种测试手段对共聚酯PEIT-PEG的结晶性能进行了系统的研究，重点分析了间苯二甲酸(IPA)、聚乙二醇(PEG)分子量和含量对共聚酯结晶性的影响。研究表明，PEIT与PEG之间发生了共聚反应，IPA的引入使PET结晶性能下降，晶粒尺寸减少，结晶度降低。引入PEG后，当PEG分子量和含量较低时，共聚酯结晶性能提高；当PEG含量较高时，在PEG分子量不变的情况下，随着PEG含量的增加，结晶性能下降；若PEG重量含量相同，PEG分子量越高，结晶性能越好。     

聚β-羟基丁酸酯和聚ε-己内酯的酯交换反应

以辛酸亚锡为催化剂 ,研究了聚 β 羟基丁酸酯 (PHB)与聚ε 己内酯 (PCL)在液相条件下的酯交换反应 .讨论了反应时间 ,反应温度和催化剂浓度对酯交换反应的影响 .采用1 3C NMR ,FTIR ,DSC ,WAXD和TGA等方法对PHB和PCL共聚酯 (PHB co PCL)的结构进行了表征 ,并对其结晶行为、晶体结构和热稳定性进行了研究 .结果表明 ,通过酯交换反应 ,所得到的共聚酯为嵌段共聚物 .提高反应温度和延长反应时间有利于酯交换反应的发生 .随着酯交换量的增加 ,PHB co PCL的结晶行为发生很大的变化 .但是 ,PHB co PCL晶体结构并没有因为PCL链段的引入而发生变化 ,而且它的热稳定性在空气气氛中略有提高     

PET类共聚酯的玻璃化转变

用DSC,IR和DLI(解偏振光法)等方法研究了聚(对苯二甲酸/间苯二甲酸)乙二醇酯[P(ET/EI)]和聚对苯二甲酸(乙二醇/丁二醇)酯[P(ET/BT)]系列共聚酯的玻璃化转变.结果表明,共聚酯的玻璃化转变是玻璃态有序结构解序后的一种转变.随ET链段含量的减少,两系列共聚酯的玻璃化转变在DSC中均表现出由拐折渐变为峰形,这是由于需要维持构象转变的ET链段在数量上的减少所致.玻璃态共聚酯的有序结构与分子链末端的游离羟基有关,游离羟基与羰基形成氢键是PET及可结晶共聚酯在结晶时必须经历的一个过程,而不能结晶的共聚酯(IPA30)则因该氢键的形成导致其玻璃化转变的消失.     

生物可降解聚丁二酸/甲基丁二酸丁二酯系列共聚物的合成和表征

摘要合成了一系列聚丁二酸/甲基丁二酸丁二醇共聚酯(PBSM), 利用DSC, ¹H NMR和X射线衍射等方法对共聚物组成、 热学性能、 结晶性能、 等温结晶行为进行了研究. 结果表明, 引入甲基丁二酸共聚单元较为显著地改变了聚丁二酸丁二酯(PBS)的热学性能, 利用Hoffman\|Weeks方程得到的共聚物平衡熔点随共聚物的组分含量增加而降低, 玻璃化转变温度亦有所降低, 熔点则符合无规共聚物的Flory方程. 此外, 利用Avrami方程分别研究了均聚物PBS及共聚物PBSM-20的等温结晶行为, 结果表明, 在所研究的温度范围内, 聚酯结晶速率随温度升高而降低, PBS和PBSM\-20的Avrami指数分别介于2.8~3.0和2.7~3.0之间, 结晶方式为三维生长异相成核, 而X射线衍射测试结果表明晶体结构几乎不变.     

辛酸镁催化L-丙交酯与ε-己内酯共聚及其共聚物结构与性能研究

以无毒性的辛酸镁为催化剂催化L-丙交酯和ε-己内酯本体开环共聚合,制备了一系列不同单体配比的共聚物.首先用1H-NMR跟踪了共聚合单体转化率,显示L-LA聚合速率显著快于ε-CL.用13C-NMR分析共聚物微观结构和计算单体单元平均序列长度(LLLe和LCe),表明聚合过程中酯交换反应导致单元序列结构重新分布.随着反应进行,LLLe急剧下降而LCe逐渐增加后稍有降低,游程数逐渐增大,共聚物无规度提高.反应初期主要是一级酯交换反应,二级酯交换反应导致的CLC序列结构在反应后期才观察到.由Fineman-Ross法计算出L-丙交酯和ε-己内酯的竞聚率分别为rLA=23和rCL=0.22,表明在聚合反应初期L-LA单体优先插入聚合物增长链端,形成LL单元长嵌段结构.共聚物组成显著影响单元序列长度,各序列长度随相应单体加入量增加而增长.二级酯交换系数(TII[CLC])随ε-CL含量增加而增大.对于整个组成范围内,根据竞聚率计算的LLLr值始终要大于聚合产物的LLLe,而LCr计算值小于或接近LCe实验值.因此,共聚物单元序列分布随共聚物投料比和反应时间而改变,趋向于无规分布.以DSC和XRD分析了共聚物热性能和结晶性,表明共聚物结晶性与单元序列长度密切相关.所有共聚物只有一个玻璃化转变温度Tg,符合无规共聚物的Fox方程,说明所得共聚物为无规共聚物,或者说包含有相容性嵌段成分的共聚物.     

基于生物基异山梨醇的高耐热共聚酯的合成与表征

采用直接酯化工艺制备了生物基异山梨醇(ISB)与间苯二甲酸(IPA)协同共聚改性的聚对苯二甲酸1,4-环己烷二甲醇酯(PICTA),研究了当IPA单元含量为15 mol%时,ISB结构单元含量对PICTA共聚酯性能的影响,目的是开发出无定形高耐热共聚酯。采用采用核磁共振氢谱(¹H-NMR)、差示扫描量热仪(DSC)、X射线衍射仪(XRD)与热重分析仪(TGA)表征了PICTA共聚酯的分子结构、热性能、结晶性能与热降解性能。研究结果表明：ISB结构单元含量每增加1 mol%,PICTA共聚酯的玻璃化转变温度线性增加约0.8℃。当ISB结构单元含量升高至25.4 mol%,经过180℃高温退火10 h的PICTA共聚酯样品趋近于无定形状态,这说明ISB共聚单元的引入可显著抑制PICTA共聚酯的结晶能力。此外,TGA研究结果表明,PICTA共聚酯具有良好的热稳定性,初始热分解温度高于405℃,但ISB共聚单元的存在并不会改变共聚酯的热分解机理。     

聚对苯二甲酸二甲酯/聚2,5-呋喃二甲酸二甲酯嵌段聚酯的合成与表征

以生物基单体2,5-呋喃二甲酸、乙二醇为原料合成聚2,5-呋喃二甲酸乙二醇酯(PEF)。采用熔融酯交换法以PEF聚酯部分取代聚对苯二甲酸乙二醇酯(PET),制备了系列PET-b-PEF嵌段共聚酯。通过核磁共振仪(NMR)、差示扫描量热仪(DSC)、热失重仪(TGA)、X射线衍射仪(XRD)等技术手段表征了共聚酯的结构和性能。结果表明,该系列共聚酯的玻璃化转变温度(Tg)在75.8~80.3℃之间,且随着PEF链段质量分数的增加,PET-b-PEF嵌段共聚酯的Tg先降低后升高,结晶度和熔融温度逐渐降低。当PEF链段含量高于15%时,共聚酯没有结晶峰。该系列共聚酯具有良好的热稳定性,起始分解温度在392.2~407.9℃之间,与所制备的PET起始分解温度403.3℃接近。且当共聚酯中PEF链段含量低于15%时,起始分解温度均在407℃左右,优于PET的热稳定性。     

生物可降解聚丁二酸/苯基丁二酸丁二醇酯系列共聚物的合成及其结晶行为

合成了一系列聚丁二酸/苯基丁二酸丁二醇共聚酯(PBSBS),利用DSC、1H-NMR和X射线等测试手段对共聚物组成、热力学性能、结晶性能、等温结晶行为进行了表征和研究.结果表明,含苯基的共聚单元的引入显著改变了聚丁二酸丁二醇酯(PBS)的热力学性能4,利用Hoffman-Week曲线得到的共聚物平衡熔点随共聚组分含量的增加显著降低,玻璃化转变温度则明显升高,结晶熔点符合无规共聚物的Flory方程.此外,利用Avrami方程对均聚物PBS以及共聚物PBSBS-10分别进行了等温结晶行为研究,结果表明共聚使结晶速率降低,PBS和PBSBS-10的Avrami指数分别介于2.8~3.0和2.7~2.9之间,结晶方式为三维生长异相成核,X射线测试结果表明共聚不影响晶体结构.     

Attempt to control monomer sequences in copolycondensations of IPA,TPA, BPA,and PHB

Copolycondensations of IPA, TPA, BPA, and PHB were studied to investigate how PHB, which can form mesogenic segments, should be incorporated into the amorphous IPA/TPA–BPA polyester to obtain the thermotropic copolyester, unlike other copolymerizations studied so far by randomly introducing nonmesogenic components into the liquid crystalline polyesters. Random and controlled copolycondensations were attempted to regulate the segment length of mesogenic PHB units by stepwise addition of BPA and PHB through the two- and three-stage reactions using TsCl/DMF/Py as a condensing agent. Thermotropic copolyesters with ca. 40 mol % PHB could be obtained by a three-stage reaction, despite that more than 70 mol % PHB is needed to prepare by usual random copolymerization with PHB. The segment length of the PHB unit was indirectly studied from IPA/TPA–BPA oligomer distribution at initial reaction by means of GPC and from the NMR analysis of the resulting copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2371–2377, 1999     

Copolycondensations of bisphenols with aggregates of isophthalic acid and terephthalic acid activated by tosyl chloride/dimethylformamide/pyridine in different manners

A mixture of isophthalic acid (IPA) and terephthalic acid (TPA) was activated by a tosyl chloride/dimethylformamide/pyridine (Py) condensing agent in two steps via the treatment of a mixture of the initially activated IPA/TPA with additional TPA followed by the activation of TPA with the agent. The resulting mixture showed a solubility in Py different from that obtained by the activation of them all at once; the difference might be due to different structures of the aggregates of the activated IPA and TPA at the same composition of the diacids. The structures of the aggregates were evaluated on the basis of melting points and the IR spectra of a mixture of dimethyl esters of IPA and TPA produced by the quenching of the reaction mixtures with methanol. The mixture obtained by two‐step activation showed lower melting points and spectral changes due to enhanced associations of the esters with respect to the mixture prepared by the activation of them all at once. The aggregates were also examined in terms of the distributions of IPA and TPA in thermotropic copolyesters prepared from methylhydroquinone and chlorohydroquinone by their transition temperatures and ¹³C NMR. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3884–3892, 2001     

一种新型阻燃抗熔滴共聚酯的合成及表征

双酚A与碳酸乙烯酯反应得到改性单体双(羟乙基)双酚A(BHEEB),BHEEB与对苯二甲酸、乙二醇及阻燃剂[(6-氧代-6H-二苯并[c,e][1,2]氧磷杂己环-6-基)甲基]丁二酸(DDP)通过无规共聚合成了一种新型阻燃共聚酯PBPET.用1H-NMR、ICP-AES对共聚酯的结构进行了表征,用热重分析(TGA)、氧指数(LOI)测定、垂直燃烧测试等对共聚酯的热稳定性、阻燃性和熔滴行为进行了研究.结果表明,BHEEB可以提高共聚酯的热稳定性,含5 mol%BHEEB与4.8 mol%DDP的共聚酯P4.8B5PET,其TGA测试中600℃下氮气氛残炭(wt6R00)可达18.0%.燃烧测试表明,P4.8B5PET的LOI值可达37.0,垂直燃烧达V-0级,并且改性单体BHEEB的引入还能有效地改善聚酯燃烧时的熔滴行为.     

热致液晶共聚酯与聚酯热塑弹性体复合物的制备与性能

原位缩聚法制备了一系列(对羟基苯甲酸-对苯二甲酸-间苯二酚)(HB-TA-RES)热致液晶共聚酯与聚对苯二甲酸丁二酯-聚四亚甲基醚热塑弹性体(PBT-PTMG)复合物,并用POM,TGA,WAXD,SEM及动态应力流变仪等手段进行了表征.复合物在较宽的共聚酯含量范围(30 wt%~70 wt%)或共聚酯组成不同时(共聚酯中HB含量20 mol%~80 mol%)均具有热致液晶行为.当复合物中共聚酯含量≤50 wt%以及共聚酯中对羟基苯甲酸(HB)含量≤60 mol%时,共聚酯分子的结构更加均匀化,结晶组分的结晶行为受到限制,基体与液晶组分具有较好的复合效果,不表现明显的相分离行为.复合物与相应的纯共聚酯相比,具有较好的热稳定性;其粘度均比基体PBT-PTMG小.当复合物中共聚酯含量≥30 wt%时,其粘度下降尤为显著,表明其具有较好的加工性.     

Depression of the crystal-nematic phase transition in thermotropic liquid crystal copolyesters

The crystal-nematic phase transition of a copolyester consisting of 20 mol% poly(ethylene terephthalate) and 80 mol% p-hydroxybenzoic acid (PHB) was characterized by depression of the crystal-nematic transition by the addition of a liquid crystal diluent. This copolyester contains blocks of crystalline PHB. Its transition behavior was compared with thatrandom copolyester with diluent of the same composition. From the extrapolated transition temperature depression data, the heat of transition per mole of p-oxybenzoate was calculated as about 1.3 kcal/mol, with an entropy of about 2 cal/deg mol. This assumes that only the p-oxybenzoate unit crystallized from the nematic state. The validity of the Flory-Huggins model for this transition point depression was confirmed graphically by comparison with two different thermotropic-liquid crystal polyesters. These results may represent the first reported crystal-nematic temperatures and heats generated by the dilution method for liquid crystal copolyesters of this type.     

对羟基苯甲酸与对苯二甲酸乙二酯的共聚物研究

对羟基苯甲酸与对苯二甲酸乙二酯的共聚物研究张广利，阎丰琪，李勇，王震，潘景岐，张鸿志（北京大学化学系北京１００８７１）关键词液晶共聚酯，ＰＥＴ／ＰＨＢ共聚脂，序列分布Ｊａｃｂｏｎ和ＫｕｈｆｕＪ’ｌ于７０年代报道了对羟基苯甲酸（ＰＨＢ）一对苯二甲酸乙二...     

Thermal Properties and Crystallinity of Thermotropic Liquid Crystalline Copolyesters Prepared from Poly(ethylene terephtalate) (PET) and Rigid Aromatic Units

A series of copolyesters were synthesized by melt‐polycondensation reaction of poly(ethylene terephtalate) (PET) with various proportions of equimolar compositions of p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA) and terephtalic acid (TPA). Viscosity, liquid crystallinity, thermal properties, degree of crystallinity and thermal stabilitiy of these copolyesters were investigated by Ubbelohde viscometer, hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and thermogravimetric analysis (TGA), respectively. On the basis of viscosity measurement, it was observed that intrinsic viscosity values of the copolyesters are increased regularly with increasing amounts of aromatic units (p‐ABA, HQDA and TPA) in the polymer chain. Thermotropic liquid crystalline behavior was observed in the copolyesters containing over 50 mol% of rigid p‐ABA/HQDA/TPA aromatic units. DSC analysis of the anisotropic copolyesters revealed broad and weak endotherms associated with the nematic phases, and the melting temperatures were found to be in the processable region. As the mol% of PET in the polymer chain increased, the specific enthalpies of fusion and the degree of crystallinity of the copolyesters were also increased regularly.     

Thermotropic copolyesters prepared by solution polycondensation with TsCl/DMF/pyridine condensing agent

When mixtures of terephthalic acid (TPA) and 1,6-naphthalenedicarboxylic acid (NDC) or 4,4′-dicarboxydiphenylether (DCDPE), TPA, and isophthalic acid (IPA) were reacted in pyridine (Py) with Tosyl chloride (TsCl)/DMF/Py to activate the diacids, the reaction mixture was soluble in Py, despite each of the separately activated diacids being insoluble. The solubility of the activated diacids was examined at a variety of acid compositions and temperatures. It was expected that a competitive reaction among the diacids with an aromatic diol in solution might be different from those in the melt, resulting in a different distribution of the acids in the copolymers. The TPA/NDC-phenylhydroquinone and DCDPE/TPA/IPA-chlorohydroquinone copolymers were prepared in solution using TsCl/DMF/Py as the condensing agent and the transition temperatures of these liquid crystalline copolyesters were compared to those obtained by melt copolycondensation. A practical depression of the transition temperature by the solution polycondensation was observed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3710–3714, 1999     

Thermotropic copolyesters having ordered comonomer sequences and flexible spacers

A series of new copolyesters having ordered comonomer sequences were synthesized via multistep routes and their properties such as glass transition (T_g) and melting temperatures (T_m), crystallization tendency, and mesomorphic properties were compared with those of the corresponding random copolyesters. All of the present copolyesters contain 1,8-octamethylene or 1,10-decamethylene spacers and hydroquinone (HQ) and terephthalic acid (TPA) moieties. In general, both melting and clearing temperatures of the ordered sequence copolyesters were much higher than those of the random counterparts. Crystallization tendency, however, was comparable. All of the present copolyesters are thermotropic and form nematic phase in melts. © 1993 John Wiley & Sons, Inc.     

STUDIES ON THE SEQUENCE STRUCTURE OF TPA/EG/PHB LIQUID CRYSTALLINE COPOLYESTERS

In this paper, the sequence structure of TPA/EG/PHB liquid crystalline copolyesters made from different synthetic methods has been studied by ~1H-NMR with the help of computer program of processing peaks. The results showed that the ether bonds were not observed in TPA./EG/PHB copolyesters and the synthetic process had a great effect on their sequence structure. Under certain conditions, the high,random TPA/EG/PHB copolyesters which were considered to have higher performances than PET/xPHB could be obtained.