Relationship between the eccentric connectivity index and Zagreb indices

For a (molecular) graph, the first Zagreb index M₁ is equal to the sum of the squares of the degrees of the vertices, and the second Zagreb index M₂ is equal to the sum of the products of the degrees of pairs of adjacent vertices. If G is a connected graph with vertex set V(G), then the eccentric connectivity index of G, ξ^C(G), is defined as, ∑_vi∈V(G)d_ie_i, where d_i is the degree of a vertex v_i and e_i is its eccentricity. In this report we compare the eccentric connectivity index (ξ^C) and the Zagreb indices (M₁ and M₂) for chemical trees. Moreover, we compare the eccentric connectivity index (ξ^C) and the first Zagreb index (M₁) for molecular graphs.     

Super connectivity of line graphs

The super connectivity κ^′ and the super edge-connectivity λ^′ are more refined network reliability indices than connectivity κ and edge-connectivity λ. This paper shows that for a connected graph G with order at least four rather than a star and its line graph L(G), κ^′(L(G))=λ^′(G) if and only if G is not super-λ^′. As a consequence, we obtain the result of Hellwig et al. [Note on the connectivity of line graphs, Inform. Process. Lett. 91 (2004) 7] that κ(L(G))=λ^′(G). Furthermore, the authors show that the line graph of a super-λ^′ graph is super-λ if the minimum degree is at least three.     

Simultaneous stabilization of a set of nonlinear port-controlled Hamiltonian systems

This paper investigates simultaneous stabilization of a set of nonlinear port-controlled Hamiltonian (PCH) systems and proposes a number of results on the design of simultaneous stabilization controllers for the PCH systems. Firstly, the case of two PCH systems is studied. Using the dissipative Hamiltonian structural properties, the two systems are combined to generate an augmented PCH system, with which some results on the control design are then obtained. For the case that there exist parametric uncertainties in the two systems’ Hamiltonian structures, an adaptive simultaneous stabilization controller is proposed. When there are external disturbances and parametric uncertainties in the two systems, two simultaneous stabilization controllers are designed for the systems: one is a robust controller and the other is a robust adaptive one. Secondly, the case of more than two PCH systems is investigated, and a new result is proposed for the simultaneous stabilization of the systems. Finally, two illustrative examples are studied by using the results proposed in this paper. Simulations show that the simultaneous stabilization controllers obtained in this paper work very well.     

Markovian jump delayed Hopfield networks with multiplicative noise

A non-symmetric version of Hopfield networks subject to state-multiplicative noise, pure time delay and Markov jumps is considered. Such networks arise in the context of visuo-motor control loops and may, therefore, be used to mimic their complex behavior. In this paper, we adopt the Lur’e-Postnikov systems approach to analyze the stochastic stability and the L₂ gain of generalized Hopfield networks including these effects.     

A simple and efficient method for variable ranking according to their usefulness for learning

The selection of a subset of input variables is often based on the previous construction of a ranking to order the variables according to a given criterion of relevancy. The objective is then to linearize the search, estimating the quality of subsets containing the topmost ranked variables. An algorithm devised to rank input variables according to their usefulness in the context of a learning task is presented. This algorithm is the result of a combination of simple and classical techniques, like correlation and orthogonalization, which allow the construction of a fast algorithm that also deals explicitly with redundancy. Additionally, the proposed ranker is endowed with a simple polynomial expansion of the input variables to cope with nonlinear problems. The comparison with some state-of-the-art rankers showed that this combination of simple components is able to yield high-quality rankings of input variables. The experimental validation is made on a wide range of artificial data sets and the quality of the rankings is assessed using a ROC-inspired setting, to avoid biased estimations due to any particular learning algorithm.     

Three-dimensional beta shapes

The Voronoi diagram of a point set has been extensively used in various disciplines ever since it was first proposed. Its application realms have been even further extended to estimate the shape of point clouds when Edelsbrunner and Mücke introduced the concept of α-shape based on the Delaunay triangulation of a point set.In this paper, we present the theory of β-shape for a set of three-dimensional spheres as the generalization of the well-known α-shape for a set of points. The proposed β-shape fully accounts for the size differences among spheres and therefore it is more appropriate for the efficient and correct solution for applications in biological systems such as proteins.Once the Voronoi diagram of spheres is given, the corresponding β-shape can be efficiently constructed and various geometric computations on the sphere complex can be efficiently and correctly performed. It turns out that many important problems in biological systems such as proteins can be easily solved via the Voronoi diagram of atoms in proteins and β-shapes transformed from the Voronoi diagram.     

Three results on frequency assignment in linear cellular networks

In the frequency assignment problem we are given a graph representing a wireless network and a sequence of requests, where each request is associated with a vertex. Each request has two more attributes: its arrival and departure times, and it is considered active from the time of arrival to the time of departure. We want to assign frequencies to all requests so that at each time step any two active requests associated with the same or adjacent vertices use different frequencies. The objective is to minimize the number of frequencies used.We focus exclusively on the special case of the problem when the underlying graph is a linear network (path). For this case, we consider both the offline and online versions of the problem, and we present three results. First, in the incremental online case, where the requests arrive over time, but never depart, we give an algorithm with an optimal (asymptotic) competitive ratio . Second, in the general online case, where the requests arrive and depart over time, we improve the current lower bound on the (asymptotic) competitive ratio to . Third, we prove that the offline version of this problem is NP-complete.     

Controller certification

A modern problem from aerospace control involves the certification of a large set of potential controllers with either a single plant or a fleet of potential plant systems, with both plants and controllers being MIMO and, for the moment, linear. Experiments on a limited number of controller/plant pairs should establish the stability and a certain level of margin of the complete set. We consider this certification problem for a set of controllers and provide algorithms for selecting an efficient subset for testing. This is done for a finite set of candidate controllers and, at least for SISO plants, for compact infinite set. In doing this, the ν-gap metric will be the main tool. Computational examples are given, including one of certification of an aircraft engine controller. The overarching aim is to introduce truly MIMO margin calculations and to understand their efficacy in certifying stability over a set of controllers and in replacing legacy single-loop gain and phase margin calculations.     

Shortest hop multipath algorithm for wireless sensor networks

Shortest hop or distance path is one of the most common methods used for relaying messages in a wide variety of networks. It provides an efficient message relaying to destination in terms of energy and time. There are many algorithms for constructing shortest hop or distance path. However, according to our knowledge, no algorithm for constructing a shortest hop multipath for wireless sensor networks (WSNs) has yet been proposed in the literature. In this paper, we propose a novel distributed shortest hop multipath algorithm for WSNs in order to generate energy efficient paths for data dissemination or routing. The proposed algorithm generates shortest hop braided multipath to be used for fault-tolerance or load-balancing. It guarantees the BFS tree and generates near optimal paths in O(V.D+V) message complexity and O(D²) time complexity regarding the communication costs towards the sink after termination of algorithm.     

Application of a fault detection filter to structural health monitoring

A model-based fault detection filter is developed for structural health monitoring of a simply supported beam. The structural damage represented in the plant model is shown to decompose into a known fault direction vector maintaining a fixed direction, dependent on the damage location, and an arbitrary fault magnitude representing the extent of the damage. According to detection filter theory, if damage occurs, under certain circumstances the fault will be uniquely detected and identified through an associated invariance in the direction imposed on the fault detection filter residuals. The spectral algorithm used to design the detection filter is based on a left eigenstructure assignment approach which accommodates system sensitivities that are revealed as ill-conditioned matrices formed from the eigenvectors in the construction of the detection filter gains. The detection filter is applied to data from an aluminum simply supported beam with four piezoelectric sensors and one piezoelectric actuator. By exciting the structure at the first natural frequency, damage in the form of a 5 mm saw cut made to one side of the beam is detected and localized.     

On the complexity of sandpile critical avalanches

In this work, we study The Abelian Sandpile Model from the point of view of computational complexity. We begin by studying the length distribution of sandpile avalanches triggered by the addition of two critical configurations: we prove that those avalanches are long on average, their length is bounded below by a constant fraction of the length of the longest critical avalanche which is, in most of the cases, superlinear. At the end of the paper we take the point of view of computational complexity, we analyze the algorithmic hardness of the problem consisting in computing the addition of two critical configurations, we prove that this problem is P complete, and we prove that most algorithmic problems related to The Abelian Sandpile Model are NC reducible to it.     

Consistency constraints and 3D building reconstruction

Virtual architectural (indoor) scenes are often modeled in 3D for various types of simulation systems. For instance, some authors propose methods dedicated to lighting, heat transfer, acoustic or radio-wave propagation simulations. These methods rely in most cases on a volumetric representation of the environment, with adjacency and incidence relationships. Unfortunately, many buildings data are only given by 2D plans and the 3D needs varies from one application to another. To face these problems, we propose a formal representation of consistency constraints dedicated to building interiors and associated with a topological model. We show that such a representation can be used for: (i) reconstructing 3D models from 2D architectural plans (ii) detecting automatically geometrical, topological and semantical inconsistencies (iii) designing automatic and semi-automatic operations to correct and enrich a 2D plan. All our constraints are homogeneously defined in 2D and 3D, implemented with generalized maps and used in modeling operations. We explain how this model can be successfully used for lighting and radio-wave propagation simulations.     

Construction of marginally and conditionally restricted designs using multiplicative algorithms

The problem of constructing optimal designs when some of the factors are not under the control of the experimenters is considered. Their values can be known or unknown before the experiment is carried out. Several criteria are taken into consideration to find optimal conditional designs given some prior information on the factors. In order to determine these optimal conditional designs a class of multiplicative algorithms is provided. Optimal designs are computed for illustrative, but simplistic, examples. Two real life problems in production models and a physical test for predicting morbidity in lung cancer surgery motivate the procedures provided.     

On the hardness of finding near-optimal multicuts in directed acyclic graphs

Given an edge-weighted (di)graph and a list of source-sink pairs of vertices of this graph, the minimum multicut problem consists in selecting a minimum-weight set of edges (or arcs), whose removal leaves no path from each source to the corresponding sink. This is a well-known NP-hard problem, and improving several previous results, we show that it remains APX-hard in unweighted directed acyclic graphs (DAG), even with only two source-sink pairs. This is also true if we remove vertices instead of arcs.     

Improved deterministic algorithms for weighted matching and packing problems

Based on the method of (n,k)-universal sets, we present a deterministic parameterized algorithm for the weighted rd-matching problem with time complexity O^∗(4^{(r−1)k+o(k)}), improving the previous best upper bound O^∗(4^rk+o(k)). In particular, the algorithm applied to the unweighted 3d-matching problem results in a deterministic algorithm with time O^∗(16^k+o(k)), improving the previous best result O^∗(21.26^k). For the weighted r-set packing problem, we present a deterministic parameterized algorithm with time complexity O^∗(2^{(2r−1)k+o(k)}), improving the previous best result O^∗(2^2rk+o(k)). The algorithm, when applied to the unweighted 3-set packing problem, has running time O^∗(32^k+o(k)), improving the previous best result O^∗(43.62^k+o(k)). Moreover, for the weighted r-set packing and weighted rd-matching problems, we give a kernel of size O(k^r), which is the first kernelization algorithm for the problems on weighted versions.     

Approximation capabilities of multilayer fuzzy neural networks on the set of fuzzy-valued functions

This paper first introduces a piecewise linear interpolation method for fuzzy-valued functions. Based on this, we present a concrete approximation procedure to show the capability of four-layer regular fuzzy neural networks to perform approximation on the set of all d_p continuous fuzzy-valued functions. This approach can also be used to approximate d_∞ continuous fuzzy-valued functions. An example is given to illustrate the approximation procedure.