油页岩灰渣合成Na-A沸石用于去除水溶液中Cu2+（英文）

Na-A zeolite was synthesized using oil shale ash （OSA）, which is a solid by-product of oil shale proc- essing. The samples were characterized by various techniques, such as scanning electron microscopy, X-ray diffrac- tion and Brunaner Emmet Teller method. The batch isothermal equilibrium adsorption experiments were performed to evaluate the ability of Na-A zeolite for removal of Cu （II） from aqueous solutions. The effects of operating pa- rameters, such as concentration of copper solutions, adsorbent dosages, pH value of solutions and temperature, on the adsorption efficiency were investigated. The equilibrium adsorption data were fitted with Langmuir and Freundlich models. The maximum adsorption capacity of Na-A zeolite obtained from the Langmuir adsorption iso- therm is 156.7 mg.g-t of Cu （lI）. The increase of pH level in the adsorption process suggests that the uptake of heavy metals on the zeolite follows an ion exchange mechanism. The batch kinetic data fit the pseudo-second order equation well. The thermodynamic parameters, such as changes in Gibbs free energy （AG）, enthalpy （AH） and en- tropy （AS）, are used to predict the nature of the adsorption process. The negative AG values at different tempera- tures confirm that the adsorption processes are spontaneous.     

交联氧化铝-壳聚糖新杂化吸附剂的制备及去除废水中Cu(Ⅱ)(英文)

A novel biosorbent was developed by coating chitosan,a naturally and abundantly available biopolymer,on to activated alumina based on oil shale ash via crosslinking.The adsorbent was characterized by various techniques,such as Fourier transform infrared spectroscopy,scanning electron microscopy,thermogravimetric-differential thermal analysis,and X-ray photoelectron spectroscope.Batch isothermal equilibrium adsorption experiments were condcted to evaluate the adsorbent for the removal of Cu(Ⅱ) from wastewater.The effect of pH and agitation time on the adsorption capacity was also investigated,indicating that the optimum pH was 6.0.The equilibrium adsorp-tion data were correlated with Langmuir and Freundlich models.The maximum monolayer adsorption capacity of chitosan coated alumina sorbent as obtained from Langmuir adsorption isotherm was found to be 315.46 mg·g-1 for Cu(Ⅱ).The adsorbent loaded with Cu(Ⅱ) was readily regenerated using 0.1 mol?L?1 sodium hydroxide solution.All these indicated that chitosan coated alumina adsorbent not only have high adsorption activity,but also had good stability in the wastewater treatment process.     

羧甲基化壳聚糖修饰磁性Fe_3O_4纳米粒子去除Cu（Ⅱ）离子

采用化学共沉淀法制备磁性Fe₃O₄纳米粒子,通过在磁性Fe₃O₄纳米粒子表面接枝高脱乙酰度羧甲基化壳聚糖（CMC）,制备了一种新型磁性纳米吸附剂。通过透射电镜、红外光谱、X射线衍射、振动样品磁强计对其进行了表征,着重研究其对Cu(Ⅱ)离子的吸附性能。结果表明：溶液pH值能显著影响吸附剂对Cu(Ⅱ)的吸附效果,pH值为5时其效果最佳。等温吸附数据符合Langmuir 模型,T＝298 K、pH＝5、V＝5 mL时,吸附剂的饱和吸附容量q_m高达71.43 mg/g,吸附常数为0.0543 L/mg。     

磁性交联壳聚糖对水溶液中铀(Ⅵ)离子的吸附行为

采用纳米Fe₃O₄作为磁流体包埋、戊二醛和硫脲进行交联壳聚糖,制备磁性交联壳聚糖（TTG-MCTS）。红外光谱（FTIR）和X射线能谱（EDS）分析结果表明,壳聚糖改性后,吸附能力得到提高,铀(Ⅵ)成功地被吸附在TTG-MCTS上。系统研究了溶液pH值、铀(Ⅵ)初始浓度及振荡时间对吸附容量的影响,继而得到最佳工艺条件。吸附过程用Langmuir等温式拟合优于用Freundlich等温式,最大吸附容量为161.3 mg·g^-1。较之拟一级动力学模型,拟二级动力学模型能更好地拟合实验数据。     

羧甲基化壳聚糖修饰磁性硅粒子去除Cr(Ⅵ)离子

先通过硅酸钠水解在磁性Fe3O4纳米粒子表面包覆二氧化硅,制得磁性硅粒子(Fe3O4@SiO2);然后再通过碳二亚胺活化接枝法在Fe3O4@SiO2纳米粒子表面接枝高脱乙酰度羧甲基化壳聚糖(CMC),制备了一种新型磁性纳米吸附剂(Fe3O4@SiO2@CMC)。通过透射电镜(TEM)、红外光谱(IR)、X射线衍射(XRD)以及振动样品磁强计(VSM)对其进行了表征,着重研究了其对水中Cr(Ⅵ)离子的吸附性能。结果表明:溶液的pH值能显著影响吸附剂对Cr(Ⅵ)离子的吸附效果,pH值为2时效果最佳。结合相应pH值下Cr(Ⅵ)的形态分布,探讨了这种新型材料对Cr(Ⅵ)的吸附机理。结果表明:其吸附机理及吸附容量与Cr(Ⅵ)的离子形式有关,吸附过程以离子交换与静电引力为主。吸附平衡数据分别采用了Langmuir和Freundlich方程进行拟合。结果表明,等温吸附数据更符合Langmuir模型,T=298 K、pH=2、V=5 mL时,吸附剂的饱和吸附容量qm=86.96 mg/g,吸附常数为0.0174 L/mg。     

磁性聚合物微球在Cr(VI)吸附分离中的应用(英文)

The magnetic poly-(methacrylate-divinyl benzene) microspheres with micron size were synthesized by modified suspension polymerization method.Adsorption of Cr(VI) from aqueous solution by magnetic poly-(MA-DVB) microspheres with surface amination was investigated.The adsorption processes were carried out under diversified conditions of pH value,adsorption time and temperature to evaluate the performance of the mag-netic microspheres.The optimum pH value for Cr(VI) adsorption was found as 3.The adsorption capacity increased with adsorption time and attained an optimum at 60 min.The adsorption processes for magnetic microspheres was endothermic reaction,and the adsorption capacity increased with increasing temperature.     

巯基功能化坡缕石去除水溶液中的汞

采用表面接枝的方法将巯基硅烷接枝在坡缕石的表面,并将其用于去除水溶液中的汞.实验结果表明:在pH=4,时间120 min和温度298 K条件下,巯基功能化坡缕石对Hg(Ⅱ)的饱和吸附量达到201.38 mg·g-1.通过分析吸附动力学和热力学实验数据发现Hg(Ⅱ)的吸附过程符合准二级动力学方程,属于速率控制步骤的化学吸...     

磁性交联壳聚糖对Ce(Ⅲ)离子的吸附性能的研究

系统的研究了壳聚糖改性后的产物（MCG）对Ce^3＋离子的吸附性能。考察了其初始离子浓度、体系的pH值、吸附时间对其吸附性能的影响,并绘制了吸附动力学曲线和吸附等温线。结果表明：其对Ce^3＋离子的吸附在60s内迅速达到平衡,对时间的依赖性很小,也就是说它对稀土离子的吸附有很好的动力学性能。根据它的吸附等温线,其吸附属于多种形式的吸附。另外,MCG重复使用5次,其吸附率仍然达到80％,解吸可在pH值为2左右的硼酸溶液中进行。     

微波辐射下甲醛交联壳聚糖的制备及其吸附性能的研究

报道了微波辐射下甲醛交联改性壳聚糖衍生物的制备及其对铜(Ⅱ)的吸附性能,考察了不同溶剂交联度的影响,并测定了交联壳聚糖和壳聚糖对铜(Ⅱ)的吸附量。结果表明,交联后的壳聚糖对铜(Ⅱ)有较好的吸附,并对微波作用进行了探讨。     

用椰壳制活性炭吸附去除三价铋离子(英文)

In present study,we report the preparation of coconut shell activated carbon as adsorbent and its appli-cation for Bi(Ⅲ) removal from aqueous solutions.The developed adsorbent was characterized with scanning elec-tron microscope(SEM),Fourier Transform Infrared(FTIR),C,H,N,S analyzer,and BET surface area analyzer.The parameters examined include agitation time,initial concentration of Bi(Ⅲ),adsorbent dose and temperature.The maximum adsorption of Bi(Ⅲ)(98.72%) was observed at 250 mg·L-1 of Bi(Ⅲ) and adsorbent dose of 0.7 g when agitation was at 160 r·min-1 for 240 min at(299±2) K.The thermodynamic parameters such as Gibb’s free energy(△Gθ),enthalpy(△Hθ) and entropy(△Sθ) were evaluated.For the isotherm models applied to adsorption study,the Langmuir isotherm model fits better than the Freundlich isotherm.The maximum adsorption capacity from the Langmuir isotherm was 54.35 mg?g?1 of Bi(Ⅲ).The kinetic study of the adsorption shows that the pseudo second order model is more appropriate than the pseudo first order model.The result shows that,coconut shell ac-tivated carbon is an effective adsorbent to remove Bi(Ⅲ) from aqueous solutions with good adsorption capacity.     

Removal of Copper (II) and Nickel (II) Ions from Aqueous Solutions by a Composite Chitosan Biosorbent

Abstract

A composite chitosan biosorbent (CCB) was prepared by coating chitosan on to ceramic alumina. The adsorption characteristics of the sorbent for copper and nickel ions were studied under batch equilibrium and dynamic flow conditions at pH 4.0. The equilibrium adsorption data were correlated with Langmuir, Freundlich, and Redlich‐Peterson models. The ultimate monolayer capacities, obtained from Langmuir isotherm, were 86.2 and 78.1 mg/g of chitosan for Cu(II) and Ni(II), respectively. In addition, dynamic column adsorption studies were conducted to obtain breakthrough curves. After the column was saturated with metal ions, it was regenerated with 0.1 M sodium hydroxide. The regenerated column was used for a second adsorption cycle.     

Removal of Pb(II) from Aqueous Solution by Cross-linked Starch Phosphate Carbamate

The adsorption process of Pb(II) ions from aqueous solution by water-insoluble starch phosphate carbamates was investigated. The influences of adsorption conditions, such as adsorption time, adsorbent dose, pH, content of the substituent groups, initial Pb(II) concentration, and temperature, were thoroughly studied. It was shown that an adsorption time of 20 min is sufficient to reach the adsorption equilibrium, the adsorption equilibrium data follow well the Langmuir isotherm model, and the adsorption of Pb(II) ions on cross-linked starch phosphate carbamate is endothermic in nature. For the cross-linked starch phosphate carbamate (CSPC3) with a phosphate group content of 3.10 mmol/g and a carbamate group content of 1.40 mmol/g, the maximum adsorption capacity evaluated from the Langmuir isotherm towards Pb(II) is 2.01 mmol/g. In addition, repeated adsorption/desorption cycles were performed to examine the reusability of adsorbents and the recovery efficiency of Pb(II) ions. The adsorption capacity of Pb(II) ions by CSPC3 decreased from 1.85 to 1.47 mmol/g for three cycles.     

Adsorption of Ce(IV) Ions from Aqueous Solution by Silica Aerogels

The adsorption process of Ce(IV) ions from aqueous solution by the silica aerogels was studied. The silica aerogels with hydrophobicity were prepared by the sol-gel process, supercritical drying, and heat treatment. The SEM image and nitrogen adsorption-desorption isotherm show that the heat-treated silica aerogel was a co-continuous porous structure with high BET surface area and narrow pore size distribution. The adsorption of Ce(IV) ions onto the silica aerogels was found to be fitted well by pseudo-second-order kinetics and Langmuir isotherm model. The activation energy for Ce(IV) adsorption onto silica aerogels could be calculated to be about 17.88 kJ/mol, which implied that the attractive forces of adsorption were weak electrostatic forces accompanying most ion-exchange reactions. The thermodynamic parameters showed that the adsorption process was spontaneous and endothermic.     

Removal of Fluoride from Aqueous Solution Using Aluminum-Impregnated Chitosan Biopolymer

Abstract

Aluminum impregnated chitosan (AIC) was prepared and applied as an adsorbent for the removal of fluoride from aqueous solutions. The process involved two stages: (i) isolation of chitosan from chitin, (ii) impregnation of aluminum in isolated chitosan at fixed pH. SEM and EDS techniques were used to characterize the composition of adsorbent AIC. Dynamic adsorption experiments on AIC were carried out at various pH, contact times, adsorption dosages, and initial fluoride concentration to determine optimum adsorption properties. The experimental data were analyzed using two adsorption models, Langmuir and Freundlich, with the later system providing the best fit. Thermodynamic parameters showed the adsorption process as spontaneous and endothermic. The adsorption process follows first-order kinetics for which a mechanism has been proposed. Reusability of the AIC was tested up to four consecutive cycles. The desorption experiment showed 92% elution of adsorbed fluoride at a pH of 12. Finally, the performance of the adsorbent material was studied on field water samples collected from a fluorosis endemic-region.     

Removal of Zinc (II) Ions from Aqueous Solutions Using Surfactant Modified Bamboo Sawdust

The present study explores the ability of surfactant modified bamboo sawdust in removing zinc (II) ions from aqueous solutions. The modified bamboo sawdust is characterized by surface area analysis, Scanning Electron Microscope, and Fourier Transform Infrared and X-ray fluorescence analysis. Adsorption isotherm and kinetic models were used to study the adsorption characteristics of zinc (II) ions onto modified bamboo sawdust. The equilibrium adsorption isotherm data were fitted into the Langmuir and Freundlich adsorption isotherms. It was found that modified bamboo sawdust yielded maximum adsorption capacity of 111.12 mg/g at 50°C for zinc (II) ions. The kinetic data obtained at different initial concentrations were analyzed using first-order-reversible reaction, pseudo-first-order, and pseudo-second-order models. The results provide strong evidence to support the hypothesis of adsorption mechanism.     

Physicochemical Parameters of Cu(II) Ions Adsorption from Aqueous Solution by Magnetic-Poly(divinylbenzene-n-vinylimidazole) Microbeads

This study is aimed at the synthesis and characterization of the mesoporous magnetic-poly(divinylbenzene-1-vinylimidazole)[m-poly(DVB-VIM))microbeads(average diameter = 53–212 µm); their application as adsorbent in the removal of Cu(II) ions from aqueous solutions was investigated. The mesoporous m-poly(DVB-VIM) microbeads were prepared by copolymerizing of divinylbenzene (DVB) with 1-vinylimidazole (VIM). The mesoporous m-poly(DVB-VIM) microbeads were characterized by N₂ adsorption/desorption isotherms, ESR, elemental analysis, scanning electron microscope (SEM), and swelling studies. At fixed solid/solution ratio the various factors affecting adsorption of Cu(II) ions from aqueous solutions such as pH, initial concentration, amount of mesoporousm-poly(DVB-VIM)) microbeads, contact time, and temperature were analyzed. Langmuir, Freundlich, and Dubinin-Radushkvich isotherms were used the model adsorption equilibrium data. The Langmuir isotherm model was the most adequate. The pseudo first-order, pseudo-second-order, Ritch-second-order, and intraparticle diffusion models were used to describe the adsorption kinetics. The experimental data fitted to pseudo second-order kinetic. The study of temperature effect was quantified by calculating various thermodynamic parameters such as Gibbs free energy, enthalpy, and entropy changes. Morever, after the use in adsorption, the mesoporous m-poly(DVB-VIM) microbeads with paramagnetic property was separated via the applied magnetic force. These features make the mesoporous m-poly(DVB-VIM) microbeads a potential candidate for support of Cu(II) ions removal under magnetic field.     

Adsorptive Removal of Pb(II) and Cu(II) Ions from Aqueous Solutions by Cross-Linked Chitosan-Polyphosphate-Epichlorohydrin Beads

In this study, the cross-linked chitosan-polyphosphate-epichlorohydrin (CCPE) beads were prepared by cross-linking chitosan with both polyphosphate and epichlorohydrin and used as bioadsorbent for the removal of Pb(II) and Cu(II) ions from aqueous solutions. The effects of the dosage of CCPE beads, solution pH, initial metal ion concentration, contact time, and temperature were investigated. Then, three important factors were selected to optimize the removal processes by the orthogonal test. The results show that CCPE beads can effectively remove the Pb(II) and Cu(II) ions from aqueous solutions, and the maximum percentage removals for Pb(II) and Cu(II) ions are 99.7% and 91.2%, respectively. The data show also that the removal processes for both Pb(II) and Cu(II) ions fit best the pseudo-second order kinetic model. Moreover, the decrease of the adsorption ability of CCPE beads is less than 10% after reuse for 9 times, which suggests that CCPE beads have good reusability.     

Removal of Copper(II) and Zinc(II) from Aqueous Solutions Using a Lignocellulosic-Based Polymeric Adsorbent Containing Amidoxime Chelating Functional Groups

In this study, the adsorption of Cu(II) and Zn(II) ions from aqueous solutions onto amidoximated polymerized banana stem (APBS) has been investigated. Infrared spectroscopy was used to confirm graft copolymer formation and amidoxime functionalization. The different variables affecting the sorption capacity such as pH of the solution, adsorption time, initial metal ion concentration, and temperature have been investigated. The optimum pH for maximum adsorption was 10.5 (99.99%) for Zn²⁺ and 6.0 (99.0%) for Cu²⁺ at an initial concentration of 10 mg L^?1. Equilibrium was achieved approximately within 3 h. The experimental kinetic data were analyzed using pseudo-first-order and pseudo-second-order kinetic models and are well fitted with pseudo- second-order kinetics. The thermodynamic activation parameters such as ΔG^o, ΔH^o, and ΔS^o were determined to predict the nature of adsorption. The temperature dependence indicates an exothermic process. The experimental isotherm data were well fitted to the Langmuir model with maximum adsorption capacities of 42.32 and 85.89 mg g^?1 for Cu(II) and Zn(II), respectively, at 20°C. The adsorption efficiency was tested using industrial effluents. Repeated adsorption/regeneration cycles show the feasibility of the APBS for the removal of Cu(II) and Zn(II) ions from water and industrial effluents.     

Adsorptive Removal of Mercury(II) Ions from Water and Wastewater by Polymerized Tamarind Fruit Shell

Abstract

A novel adsorbent, formaldehyde polymerized tamarind fruit shell (FPTFS) containing sulphonic acid functional groups was prepared and its utility for Hg(II) adsorption from water and wastewater was investigated. The kinetic and isotherm data, obtained at optimum pH value 6.0 for different concentrations and temperatures, could be fitted with the Ritchie modified second-order equation and Sips isotherm model respectively and the coefficients indicated favorable adsorption of Hg(II) on the FPTFS. The complete removal of 23.86 mg/L Hg(II) from chlor-alkali industry wastewater was achieved by 4 g/L FPTFS. The reusability of the FPTFS for several cycles was also demonstrated using 0.1 M HCl solution.     

Removal of Lead (II) Ions from Aqueous Solution Using Eggplant Peels Activated Charcoal

The eggplant peel activated charcoal (EPPAC) was investigated as an adsorbent for the removal of lead II ions from aqueous solution. Three methods were tested for the production of eggplant peel activated charcoal (EPPAC) from eggplant peel charcoal (EPPC), yielding three different products; EPPAC-1, EPPAC-2, and EPPAC-3. The difference among the three methods lies in the primary physical mixing of the EPPC with the activating agent (potassium hydroxide) before heating the mixture in a furnace for activation. The removal efficiency of lead II ions by the three adsorbents was 57.7%, 70.0%, and 60.0% for EPPAC-1, EPPAC-2, and EPPPAC-3, respectively. The optimized activation parameters for EPPAC-2 were: activation time 2 hours, activation temperature 700°C, and activation ratio 1:2 (EPPAC: KOH). Scanning electron microscopy (SEM) revealed that EPPAC-2 has the most porous structure. The surface area of EPPAC-2 was measured to be 739 m²/g. Adsorption kinetics of lead (II) is best described by the pseudo-second-order kinetic model with second order rate constant of 1.70 × 10^?3 g/mg.h at room temperature. The adsorption of lead on EPPAC-2 is found to follow the Langmuir isotherm with a maximum adsorption capacity of 1.4 × 10² mg/g.