Very high thermal stability with excellent dielectric,and non-ohmics properties of Mg-doped CaCu<Subscript>3</Subscript>Ti<Subscript>4.2</Subscript>O<Subscript>12</Subscript> ceramics

In this work, the nominal CaCu_3?xMg_xTi_4.2O₁₂ (0.00, 0.05 and 0.10) ceramics were prepared by sintering pellets of their precursor powders obtained by a polymer pyrolysis solution method at 1100 °C for different sintering time of 8 and 12 h. Very low loss tangent (tanδ)?<?0.009–0.014 and giant dielectric constant (ε′) ～?1.1?×?10⁴–1.8?×?10⁴ with excellent temperature coefficient (Δε′) less than ±?15% in a temperature range of ??60 to 210 °C were achieved. These excellent performances suggested a potent application of the ceramics for high temperature X8R and X9R capacitors. It was found that tanδ values decreased with increasing Mg²⁺ dopants due to the increase of grain boundary resistance (R_gb) caused by the very high density of grain, resulting from the substitution of small ionic radius Mg²⁺ dopants in the structure. In addition, CaCu_3?xMg_xTi_4.2O₁₂ ceramics displayed non-linear characteristics with the significant enhancements of a non-linear coefficient (α) and a breakdown field (E_b) due to Mg²⁺doping. The high values of ε′ (14012), α (13.64) and E_b (5977.02 V/cm) with very low tanδ value (0.009) were obtained in a CaCu_2.90Mg_0.10Ti_4.2O₁₂ ceramic sintered at 1100 °C for 8 h.     

Mechanochemical synthesis,crystal structure and ion conduction in the Gd<Subscript>2</Subscript>Hf<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>Ti<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>7</Subscript> system

This work describes the mechanochemical synthesis, structural characterization and electrical properties of an interesting group of novel ionic conductors, with general formula Gd₂(Hf_2?x Ti _x )₂O₇. Different compositions in this system (x = 0, 0.4, 0.8, 1.2, 1.6 and 2) were obtained at room temperature, via a mechanochemical reaction between the corresponding elemental oxides, and characterized by using XRD, Raman spectroscopy and SEM. The XRD structural analysis by the Rietveld method revealed that all the Hf-containing compositions show a disordered fluorite-like structure instead of the expected pyrochlore-like atomic ordering, and the cation size mismatch criteria for pyrochlore stability. Increasing Ti content promotes a phase transformation to the pyrochlore structure with post-milling thermal treatments, which takes place in all samples on annealing at 1200 °C, except for Gd₂Hf₂O₇. These results were confirmed by Raman spectroscopy, which also suggests that the x = 0.4 sample has the highest degree of oxygen disorder in the system and that this disorder decreases with increasing Ti⁴⁺ content. Finally, all samples show the pyrochlore structure on firing at 1500 °C. Activation energies E _dc for oxygen migration were determined by using impedance spectroscopy and found to be within the ~0.9–1.2 eV range, whereas conductivity σ _dc values at 700 °C vary from 1.12 × 10^?6 to 2.75 × 10^?4 S cm^?1, with decreasing conductivity as Ti⁴⁺ content increases.     

Controllable preparation of large-area arrays of Al-substituted CoCuNi ferrite rods with improvement of saturation magnetization and initial permeability

Co_0.5Cu_0.3Ni_0.2Al _x Fe_2?x O₄ (x = 0, 0.07, 0.14, and 0.21) rods of large-area arrays are synthesized by a solvothermal method, followed by calcination in air. The samples are characterized by powder X-ray diffraction, FT-IR spectra, scanning electron microscope, and vibrating sample magnetometer. The effect of diamagnetic Al³⁺ ion substitution and calcination temperature on the structure, morphology, and magnetic properties of Co_0.5Cu_0.3Ni_0.2Al _x Fe_2?x O₄ has been investigated. The results indicate that high-crystallized cubic Co_0.5Cu_0.3Ni_0.2Al _x Fe_2?x O₄ rods of large-area arrays are obtained when the precursors are calcined at 750 °C in air for 3 h. The crystallite size of Co_0.5Cu_0.3Ni_0.2Al _x Fe_2?x O₄ increases with the increase in Al³⁺ content, attributed to the decrease in lattice strain in Co_0.5Cu_0.3Ni_0.2Al _x Fe_2?x O₄ with the increase in Al³⁺ content. The lattice parameters of Co_0.5Cu_0.3Ni_0.2Al _x Fe_2?x O₄ slightly increase with the increase in Al³⁺ content. This is due to the transformation from cubic NiFe₂O₄ phase to cubic CoFe₂O₄ phase after doping Al³⁺ ion. Al³⁺ substitution can improve the magnetic properties of Co_0.5Cu_0.3Ni_0.2Al _x Fe_2?x O₄. Co_0.5Cu_0.3Ni_0.2Al_0.14Fe_1.86O₄, calcined at 950 °C, has the highest specific saturation magnetization (86.36 ± 2.25 emu/g) and magnetic moment (3.586 ± 0.093 μ _B ). Co_0.5Cu_0.3Ni_0.2Al_0.21Fe_1.79O₄, calcined at 950 °C, has the highest initial permeability (17.216 ± 0.448). The results are explained by Neel’s two sublattices.     

The magnetic properties of BiY<Subscript>2</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript> nanoparticles doped with Cr ions

BiY₂Cr _x Fe_5?x O₁₂ (x = 0, 0.05, 0.1, 0.2, 0.3) nanocrystals were synthesized by using a sol-gel method. Samples were characterized by the powder X-ray diffraction (XRD), the thermal gravity analysis (TGA) and the differential thermal analysis (DTA), the vibrating sample magnetometer(VSM) and Mössbauer spectrums. The average sizes of the particles were determined by the Scherrer’s formula. The special Ms and Mössbauer spectra of BiY₂Cr _x Fe_5?x O₁₂ nanocrystals are researched at room temperature. It is seen that the special Mss of samples are initially increased with increasing Cr³⁺ content (x < 0.1), and decreased with increasing content of Cr³⁺ ions (x > 0.1).     

Anisotropic ferromagnetism in Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Sn<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> nanostructure arrays

Periodic arrays of Fe _x Sn_1?x O₂ nanostructures were fabricated by glancing angle sputter deposition onto self-assembled close-packed arrays of 200-nm-diameter polystyrene microspheres. After annealing at 873 K for 3 h, all the films were crystallized to rutile SnO₂ and maintained good thermal stability in the morphology. Compared with Fe _x Sn_1?x O₂ flat films, arrays of Fe _x Sn_1?x O₂ nanostructures possessed larger saturation magnetic moment and exhibited both perpendicular and in-plane magnetic anisotropy, resulting from the anisotropic morphology of Fe _x Sn_1?x O₂ nanostructures. The EPR signal originating from the oxygen vacancies significantly varied with the Fe concentration and reached the strongest at x = 0.059, which is consistent with the saturation magnetization. It demonstrates that the oxygen vacancies are an important factor for the ferromagnetism of Fe _x Sn_1?x O₂ films.     

Al<Superscript>3+</Superscript> doped M-type hexagonal Ba–Co ferrites synthesized via ball-milling assisted ceramic process: magnetism and its correlation with structural properties

Ba_0.5Co_0.5Al _x Fe_12?xO₁₉ (x?=?0, 0.08, 0.16, and 0.24) hexaferrites are synthesized via ball-milling assisted ceramic process, and their crystal structure, microstructure, and magnetic properties were studied. The results show that all samples, calcined between 950 and 1150 °C, consist of the main M-type hexagonal Ba ferrite phase in combination of a small amount of CoFe₂O₄ and Fe₂O₃ phase. The lattice parameters of M-type hexagonal Ba_0.5Co_0.5Al _x Fe_12?xO₁₉ decrease after Al³⁺ doping. The addition of Al³⁺ ions results in a reduction of crystallite size, which is attributed that the presence of foreign phase CoFe₂O₄ and Fe₂O₃ restrains the growth of the Ba_0.5Co_0.5Al _x Fe_12?xO₁₉ crystallite. Magnetic characterization indicates that all samples exhibit hard magnetic properties. Trend of specific saturation magnetization of Ba_0.5Co_0.5Al _x Fe_12?xO₁₉ sample, calcined at 1050 and 1150 °C, decreases with the increase in Al³⁺ content. The varied magnetic properties with substitution content (x) are well explained by the occupancy effects of Al³⁺ ions in magnetoplumbite structure. Ba_0.5Co_0.5Fe₁₂O₁₉, calcined at 1150 °C, has the highest specific saturation magnetization value (56.07 emu/g), remanence (28.66 emu/g), and moment (10.76 µ_B). Besides, with the increase of substitution content (x), magnetic domain type of ferrites, calcined at 1150 °C, changes from a single magnetic domain to a multi-domain type.     

Microwave dielectric properties of Sr<Subscript>0.7</Subscript>Ce<Subscript>0.2</Subscript>TiO<Subscript>3</Subscript>–Sr(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript> ceramics

xSr_0.7Ce_0.2TiO₃–(1???x)Sr(Mg_1/3Nb_2/3)O₃ ceramics, referred to xSCT–(1???x)SMN, were successfully produced by conventional solid-state sintered technology. The compounds, belonging to perovskites with a secondary phase of CeO₂, can be detected even with x down to 0.1 of SCT composition. The overall trend for grain growth illustrates the increase with increasing SCT doping level. The Raman peak at 825 cm^?1 splits into two peaks and causes red shift phenomenon. XPS spectra indicate that Ti and Nb ions exist respectively in tetravalence and pentavalence, and Ce ions exist in trivalence and tetravalence. Dielectrics constant (ε _r ) of SCT–SMN ceramics gradually increases with increasing theoretical dielectric polarizabilities. A wider width of the 825 cm^?1 for FWHM of A_1g mode Raman peaks suggests to a lower Q?×?f value. The increasing tolerance factor in agreement with temperature coefficient of resonant frequency (τ _f ), denotes that the rise of perovskite symmetry. The 0.1SCT–0.9SMN ceramic sintered at 1450?°C for 4 h illustrates excellent microwave dielectric properties with ε _r ?~?35.4, Q?×?f?~?11282 GHz and τ _f ?~?1.7 ppm/°C. Activation energies of 0.1SCT–0.9SMN ceramic at 100, 300 and 500 V, are ~0.436, 0.427 and 0.331 eV, respectively, indicative of a decreased trend with external electric field.     

Doping mechanisms and electrical properties of bismuth tantalate fluorites

Phase-pure bismuth tantalate fluorites were successfully prepared via conventional solid-state method at 900 °C in 24–48 h. The subsolidus solution was proposed with the general formula of Bi_3+x Ta_1?x O_7?x (0 ≤ x ≤ 0.184), wherein the formation mechanism involved a one-to-one replacement of Ta⁵⁺ cation by Bi³⁺ cation within ~4.6 mol% difference. These samples crystallised in a cubic symmetry, space group Fm-3 m with lattice constants, a = b = c in the range 5.4477(± 0.0037)–5.4580(± 0.0039) Å. A slight increment in the unit cell was discernible with increasing Bi₂O₃ content, and this may attribute to the incorporation of relatively larger Bi³⁺ cation in the host structure. The linear correlation between lattice parameter and composition variable showed that the Vegard’s law was obeyed. Both TGA and DTA analyses showed Bi_3+x Ta_1?x O_7?x samples to be thermally stable as neither phase transition nor weight loss was observed within ~28–1000 °C. The AC impedance study of Bi₃TaO₇ samples was performed over the frequency range 5–13 MHz. At intermediate temperatures, ~350–850 °C, Bi_3+x Ta_1?x O_7?x solid solution was a modest oxide ion conductor with conductivity, ~10^?6–10^?3 S cm^?1; the activation energy was in the range 0.98–1.08 eV.     

Effect of Ni<Superscript>2+</Superscript> substitution on crystal structure and microwave dielectric properties for MgZrNb<Subscript>2</Subscript>O<Subscript>8</Subscript> ceramics

Monoclinic structured Mg_1?xNi_xZrNb₂O₈ (0?≤?x?≤?0.12) ceramics were synthesized for the first time through traditional solid-state reaction process and pure phase were obtained in all range. Rietveld refinement was used to analyze the crystal structure. With the increase of Ni²⁺ substitution amount, ε _r decreased, Q?×?f rose first then fell, τ _f shifted for the positive direction. Bond ionicity, lattice energy and bond energy were separately calculated to investigate the correlations with microwave dielectric properties. Typically, ceramics samples with the composition of Mg_0.92Ni_0.08ZrNb₂O₈ sintered at 1280 °C for 4 h exhibited the optimum microwave dielectric properties: ε _r ?=?24.58, Q?×?f?=?74534.1 GHz, τ _f ?=???49.11 ppm/°C, which could be a promising material for application.     

Influence of Nd doping on microwave dielectric properties of SrTiO<Subscript>3</Subscript> ceramics

Sr_1?x Nd _x TiO₃ (x?=?0.08–0.14) ceramics were prepared by conventional solid-state methods. The analysis of crystal structure suggested Sr_1?x Nd _x TiO₃ ceramics appeared to form tetragonal perovskite structure. The relationship between charge compensation mechanism, microstructure feature and microwave dielectric properties were investigated. Trivalent Nd³⁺ substituting Sr²⁺ could effectively decrease oxygen vacancies. This reduction and relative density were critical to improve Q?×?f values of Sr_1?x Nd _x TiO₃ ceramics. For ε _r values, incorporation of Nd could restrain the rattling of Ti⁴⁺ cations and led to the reduction of dielectric constant. The τ _f values were strongly influenced by tilting of oxygen octahedral. The τ _f values decreased from 883 to 650 ppm/°C with x increasing from 0.08 to 0.14. A better microwave dielectric property was achieved for composition Sr_0.92Nd_0.08TiO₃ at 1460 °C: ε _r ?=?160, Q?×?f?=?6602 GHz, τ _f ?=?883 ppm/°C.     

Low temperature sintering and dielectric properties of Ba<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript> microwave ceramics using Co<Subscript>2</Subscript>O<Subscript>3</Subscript> additives

The Ba₃(VO₄)₂–x wt% Co₂O₃ (x?=?0.5–5) ceramics were prepared by the solid state reaction method in order to reduce the sintering temperature. The effects of the Co₂O₃ additions on the phase composition, microstructures, sintering characteristics and microwave dielectric properties of Ba₃(VO₄)₂ ceramics are investigated by an X-ray diffractometer, a scanning electron microscope and a network analyzer. As a result, the Q?×?f value of 54,000 GH, the ε _r of 14.6 and the τ_f value of +58.5 ppm/°C were obtained in the sample of the Ba₃(VO₄)₂–3 wt% Co₂O₃ ceramic sintered at the temperature of 925 °C, which is capable to co-fire with electrode metal of high conductivity such as Ag (961 °C). Moreover, the Q?×?f values of the sample with Co₂O₃ higher than that of 3 wt% additions decreased because of the formation of Ba₂V₂O₇ phase.     

Cations size mismatch versus bonding characteristics: synthesis,structure and oxygen ion conducting properties of pyrochlore-type lanthanide hafnates

This work describes the synthesis, structural characterization and electrical properties of solid solutions with the general formula Gd₂Hf_2?xB_xO₇, where B?=?Ti⁴⁺, Sn⁴⁺ and Zr⁴⁺. All samples were successfully prepared in?~?30 h, via a mechanochemical reaction in a planetary ball mill, using the corresponding elemental oxides as starting chemicals. The XRD and Raman spectroscopy analysis of the title samples revealed that on firing at 1500 °C Hf⁴⁺ substitution by Sn⁴⁺ and Ti⁴⁺ produces better ordered pyrochlore structures and decreases the electrical conductivity of Gd₂Hf₂O₇ by more than two orders of magnitude (from 2.7?×?10^?4 at 700 °C to 8.71?×?10^?7 and 1.12?×?10^?6 Sm cm^?1, for Gd₂Sn₂O₇ and Gd₂Ti₂O₇, respectively). By contrast, the Gd₂Hf_2?xZr_xO₇ system remains disordered with conductivity increasing by almost an order of magnitude and reaching a value for Gd₂Zr₂O₇ of 1.55?×?10^?3 Sm cm^?1 at 700 °C, whereas the activation energy for oxygen migration decreases in both, the Sn- and Ti-containing systems, and increases slightly in the Zr-containing solid solution. These changes cannot be only explained when taking into account the cations size ratio criteria; the covalency of the <B–O> metal bond plays also a key role in determining the structural characteristics and electrical properties of the title three systems.     

Crystal structure,microstructure and microwave dielectric properties of novel MgAl<Subscript>2</Subscript>Ti<Subscript>3</Subscript>O<Subscript>10</Subscript> ceramic

In the present work, a novel MgAl₂Ti₃O₁₀ ceramic was obtained using a traditional solid-state reaction method. X-ray diffraction and energy dispersive spectrometer showed that the main MgAl₂Ti₃O₁₀ phase was formed after sintered at 1300–1450 °C. With rising the sintering temperature from 1300 to 1450 °C, the bulk density (ρ), relative permittivity (ε _r ) and Q?×?f value firstly increased, reached the maximum values (3.61 g/cm³, 14.9, and 26,450 GHz) and then decreased. The temperature coefficient of resonator frequency (τ _f ) showed a slight change at a negative range of ??94.6 to ??83.7 ppm/°C. When the sintering temperature was 1400 °C, MgAl₂Ti₃O₁₀ ceramics exhibited the best microwave dielectric properties with Q?×?f?=?26,450 GHz, ε _r ?=?14.9 and τ _f ?=???83.7 ppm/°C.     

Microwave dielectric properties of ZnO–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–<Emphasis Type="Italic">x</Emphasis>TiO<Subscript>2</Subscript> ceramics prepared by reaction-sintering process

The ZnO–Nb₂O₅–xTiO₂ (1 ≤ x ≤ 2) ceramics were fabricated by reaction-sintering process, and the effects of TiO₂ content and sintering temperature on the crystal structure and microwave dielectric properties of the ceramics were investigated. The XRD patterns of the ceramics showed that ZnTiNb₂O₈ single phase was formed as x ≤ 1.6 and second phase Zn_0.17Nb_0.33Ti_0.5O₂ appeared at x ≥ 1.8. With the increase of TiO₂ content and sintering temperature, the amount of the second phase Zn_0.17Nb_0.33Ti_0.5O₂ increased, resulting in the increase of dielectric constant, decrease of Q × f value, and the temperature coefficient of resonant frequency (τ _f ) shifted to a positive value. The optimum microwave dielectric properties were obtained for ZnO–Nb₂O₅–2TiO₂ ceramics sintered at 1075 °C for 5 h: ε _r  = 45.3, Q × f = 23,500 GHz, τ _f  = +4.5 ppm/°C.     

Influence of isovalent and heterovalent substitution for Bi<Superscript>3+</Superscript> and Fe<Superscript>3+</Superscript> on the properties of Bi<Subscript>2</Subscript>Fe<Subscript>4</Subscript>O<Subscript>9</Subscript>-based solid solutions

Bi_2–хLa_хFe₄O₉ and Bi₂Fe_4–2xTi_xCo_xO₉ ferrites have been prepared by solid-state reactions at a temperature of 1073 K. X-ray diffraction data indicate that, in the Bi_2–хLa_хFe₄O₉ system, the limiting degree of La³⁺ substitution for Bi³⁺ ions in Bi₂Fe₄O₉ does not exceed 0.05 and that the limiting degree of substitution in the Bi₂Fe_4–2xTi_xCo_xO₉ system lies in the range 0.05 < x < 0.1. The specific magnetization and specific magnetic susceptibility of the samples have been measured at temperatures from 5 to 300 K in a magnetic field of 0.86 T. The field dependences of magnetization obtained for the Bi_2–хLa_хFe₄O₉ and Bi₂Fe_4–2xTi_xCo_xO₉ ferrites at temperatures of 300 and 5 K demonstrate that partial isovalent substitution of La³⁺ for Bi³⁺ ions in Bi₂Fe₄O₉ and heterovalent substitution of Ti⁴⁺ and Co²⁺ ions for two Fe³⁺ ions leads to partial breakdown of the antiferromagnetic state and nucleation of a ferromagnetic state.     

Structural Formation and Improved Performances of Chemically Synthesized Composition-Controlled Micron-Sized Fe100−x Co x Particles

Micron-sized composition-controlled Fe_100?x Co _x (20 < x < 75) alloy particles with high purity have been prepared by an optimized reduction reaction. The influence of Co content on the alloying process, structures, and magnetic properties of the products has been studied. The as-synthesized Fe_{100 ?x} Co _x with x < 65 exhibit a single bcc crystal structure. A bcc-FeCo/fcc-Co composite structure can be formed in the Fe_100?x Co _x products with x > 65. Very slight surface oxidation is observed in all the products. The high purity and single bcc-FeCo phase for the well-alloyed Fe_{100 ?x} Co _x particles with x < 65 lead to their high saturation magnetization of 182–220 A m² kg^?1. All the well-alloyed Fe_{100 ?x} Co _x show nearly spherical morphologies with an average particle size of 2–8 μm, which results in their good compactibility with a high compacted density of about 7.4–7.6 g cm^?3. The simple preparation and improved performances for these chemically synthesized composition-controlled FeCo particles show their great potential for applications in near-net-shaped and complex-shaped FeCo-based soft magnetic composite devices.     

Low temperature sintering and microwave dielectric properties of Zn<Subscript>3</Subscript>Mo<Subscript>2</Subscript>O<Subscript>9</Subscript> ceramic

Crystal structure and dielectric properties of Zn₃Mo₂O₉ ceramics prepared through a conventional solid-state reaction method were characterized. XRD and Raman analysis revealed that the Zn₃Mo₂O₉ crystallized in a monoclinic crystal structure and reminded stable up to1020 °C. Dense ceramics with high relative density (~ 92.3%) were obtained when sintered at 1000 °C and possessed good microwave dielectric properties with a relative permittivity (ε _r ) of 8.7, a quality factor (Q?×?f) of 23,400 GHz, and a negative temperature coefficient of resonance frequency (τ _f ) of around ??79 ppm/°C. With 5 wt% B₂O₃ addition, the sintering temperature of Zn₃Mo₂O₉ ceramic was successfully lowered to 900 °C and microwave dielectric properties with ε _r ?=?11.8, Q?×?f?=?20,000 GHz, and τ _f = ??79.5 ppm/°C were achieved.     

A new niobate-based CaO–2CuO–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> microwave dielectric ceramic composite for LTCC applications

A novel CaO–2CuO–Nb₂O₅ (CCN) ceramic composite was prepared by the solid-state reaction method in the temperature range of 810–890 °C. Typically, the CCN sintered at 870 °C exhibited the excellent microwave properties of ε _r ?=?15.7, Q?×?f?=?28,700 GHz, τ _f = ? 38.4 ppm/°C. The τ _f of CCN was turned to be near zero by adding TiO₂, while the ε _r increased slightly and the Q?×?f decreased. The 0.91CCN–0.09TiO₂ ceramic sintered at 920 °C showed modified properties of ε _r ?=?16.9, Q?×?f?=?21,500 GHz, τ _f = ? 1.6 ppm/°C, which shows potential in LTCC applications.     

Improvement of the Magnetization of Barium Hexaferrites Induced by Substitution of Nd<Superscript>3+</Superscript> Ions for Fe<Superscript>3+</Superscript> Ions

Barium hexagonal ferrites (BaNd _x Fe_12?x O ₁₉) have been synthesized by initial high-energy milling of the precursors and calcining subsequently. The as-prepared samples are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and vibrating sample magnetometry (VSM). XRD and SEM examinations reveal that a high-crystallized hexagonal BaNd _x Fe_12?x O ₁₉ with lamellar morphology is obtained when the precursor is calcined at 1200^°C in air for 3 h. The hexagonal crystalline structure of BaFe₁₂ O ₁₉ is not changed after doping Nd³⁺ ions in BaFe₁₂ O ₁₉. However, lattice parameters a and b values increase with an increase in Nd content at first, then decrease. Nd substitution may improve the magnetic properties of BaNd _x Fe_12?x O ₁₉. BaNd_0.1Fe_11.9 O ₁₉, obtained at 1050^°C, has the highest specific saturation magnetization value (80.81 emu/g) and magnetic moment (16.21 μ _B); BaNd_0.2Fe_11.8 O ₁₉, obtained at 950^°C, has the highest coercivity value, 4075.19 Oe.     

Phase equilibria and crystal structures of solid solutions in the system LaCoO<Subscript>3−δ</Subscript>-SrCoO<Subscript>2.5±δ</Subscript>-SrFeO<Subscript>3−δ</Subscript>-LaFeO<Subscript>3−δ</Subscript>

The composition region and structure of La_1?x Sr _x Co_1?y Fe _y O_3?δ solid solutions are determined by x-ray powder diffraction using the Rietveld profile analysis method. The solid solutions based on lanthanum cobaltite, LaCoO_3?δ, have a rhombohedrally distorted perovskite-like structure (sp. gr. R \(\bar 3\) c), and those based on lanthanum ferrite, LaFeO_3?δ, have an orthorhombically distorted structure (sp. gr. Pbnm). The rhombohedral distortion decreases with increasing strontium content, and the solid solutions with x ≥ 0.5 have an ideal cubic structure (sp. gr. Pm3m). The composition dependences of lattice parameters for the La_1?x Sr _x Co_1?y Fe _y O_3?δ solid solutions are presented, and the 1100°C isotherm of the LaCoO_3?δ-SrCoO_2.5±δ-SrFeO_3?δ-LaFeO_3?δ system in air is constructed.