| 碳五烷烃裂解制低碳烯烃反应性能的分析 |
| |
| 引用本文： | 刘美佳,王刚,张忠东,许顺年,王皓,党法璐,何盛宝. 碳五烷烃裂解制低碳烯烃反应性能的分析[J]. 化工学报, 2021, 72(10): 5172-5182. DOI: 10.11949/0438-1157.20210488 |
| |
| 作者姓名： | 刘美佳 王刚 张忠东 许顺年 王皓 党法璐 何盛宝 |
| |
| 作者单位： | 中国石油大学(北京)重质油国家重点实验室,北京102249;中国石油石油化工研究院,北京102206;中国石油天然气股份有限公司规划总院,北京100083 |
| |
| 基金项目： | 中国石油天然气股份有限公司科技开发项目(2019A-1809) |
| |
| 摘 要： | 考察了碳五烷烃的热裂解和催化裂解反应性能，发现正戊烷和异戊烷的裂解反应产物存在差异；进一步分析了正戊烷和异戊烷的裂解反应机理，以及裂解生成低碳烯烃和甲烷的区别。结果表明，在热裂解条件下，正戊烷的（乙烯+丙烯）选择性高于异戊烷，异戊烷的丁烯和甲烷选择性高于正戊烷；650℃时，正戊烷和异戊烷的热裂解产品中（乙烯+丙烯）、丁烯、甲烷的选择性分别为37.48%、7.23%、6.75%和19.57%、25.16%、9.36%。而在催化裂解条件下，异戊烷的（乙烯+丙烯）、丁烯、甲烷选择性均高于正戊烷；650℃时，正戊烷和异戊烷的催化裂解产品中（乙烯+丙烯）、丁烯、甲烷的选择性分别为37.16%、9.11%、7.80%和47.70%、14.45%、13.79%。此外，发现在高温裂解条件下异构烷烃比正构烷烃容易裂解生成丁烯和甲烷。
|
| 关 键 词： | 烷烃 催化裂解 热解 低碳烯烃 甲烷 |
| 收稿时间： | 2021-04-08 |
Analysis of reaction performance of high efficient pyrolysis of C5 alkanes to light olefins |
| |
| Meijia LIU,Gang WANG,Zhongdong ZHANG,Shunnian XU,Hao WANG,Falu DANG,Shengbao HE. Analysis of reaction performance of high efficient pyrolysis of C5 alkanes to light olefins[J]. Journal of Chemical Industry and Engineering(China), 2021, 72(10): 5172-5182. DOI: 10.11949/0438-1157.20210488 |
| |
| Authors: | Meijia LIU Gang WANG Zhongdong ZHANG Shunnian XU Hao WANG Falu DANG Shengbao HE |
| |
| Affiliation: | 1.State Key Laboratory of Heavy Oil, China University of Petroleum (Beijing), Beijing 102249, China;2.Petrochemical Research Institute, PetroChina, Beijing 102206, China;3.PetroChina Planning & Engineering Institute, Beijing 100083, China |
| |
| Abstract: | The thermal cracking and catalytic cracking reaction performance of C5 alkanes were investigated, and the cracking reaction products of n-pentane and isopentane were found to be different. Furthermore, the pyrolysis mechanism of n-pentane and isopentane was analyzed, and the difference between the cracking of n-pentane and isopentane to produce light olefins and methane was revealed. The results showed that under thermal pyrolysis conditions, the selectivity of (ethylene + propylene) of n-pentane was higher than that of isopentane, the selectivities of isopentane thermal pyrolysis products butene and methane were higher than that of n-pentane. At 650℃, the selectivities of n-pentane and isopentane thermal pyrolysis products including (ethylene + propylene), butene, and methane were 37.48%, 7.23%, 6.75% and 19.57%, 25.16%, 9.36%, respectively. However, under catalytic pyrolysis conditions, the selectivities of isopentane catalytic pyrolysis products (ethylene + propylene), butene, and methane were higher than that of n-pentane. At 650℃, the selectivities of n-pentane and isopentane thermal pyrolysis products including (ethylene + propylene), butene, and methane were 37.16%, 9.11%, 7.80% and 47.70%, 14.45%, 13.79%, respectively. In addition, it was found that isoalkanes are easier to crack to butene and methane than n-alkanes under high temperature cracking conditions. |
| |
| Keywords: | alkane catalytic pyrolysis pyrolysis light olefins methane |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《化工学报》浏览原始摘要信息 |
|
点击此处可从《化工学报》下载免费的PDF全文 |
|
