| CBN磨料特性对树脂砂轮磨削性能的影响 |
| |
| 引用本文： | 李克华,熊华军,郜永娟,史林峰,韩雪. CBN磨料特性对树脂砂轮磨削性能的影响[J]. 金刚石与磨料磨具工程, 2017, 37(3): 19-22,34. DOI: 10.13394/j.cnki.jgszz.2017.3.0005 |
| |
| 作者姓名： | 李克华 熊华军 郜永娟 史林峰 韩雪 |
| |
| 作者单位： | 1. 国机精工有限公司, 郑州 450001;2. 郑州磨料磨具磨削研究所有限公司, 郑州 450001;3. 超硬材料磨具国家重点实验室, 郑州 450001 |
| |
| 基金项目： | 郑州市重点攻关项目“汽车关键零部件磨削用CBN磨盘的研制”（131PZDGG242） |
| |
| 摘 要： | 对6种不同CBN磨料的静压破碎负荷、冲击韧性（TI）和热冲击韧性（TTI）的数据进行分析研究，并分别制作成树脂结合剂砂轮。针对不同材料工件进行磨削，研究不同CBN磨料制作的砂轮磨削铸铁、高速钢、不锈钢和氮化不锈钢等材料的磨削比。实验结果表明:同样结合剂和工艺条件下，不同CBN磨料制作砂轮的磨削比相差较大；树脂CBN砂轮对铸铁和高速钢材料的磨削比相对较高，但对不锈钢和氮化不锈钢材料的磨削比低；CBN-B1500和CBN850磨料对几种工件材料的磨削性能相对较好。树脂CBN砂轮中磨料靠结合剂机械嵌合力把持，因此具有粗糙表面和适中静压破碎负荷的CBN磨料是较优选择。
|
| 关 键 词： | 树脂结合剂 CBN砂轮 磨削比 冲击韧性 |
| 收稿时间： | 2017-04-12 |
Influence of different CBN grains on grinding performance of resin bonded CBN grinding wheel |
| |
| LI Kehua,XIONG Huajun,GAO Yongjuan,SHI Linfeng,HAN Xue. Influence of different CBN grains on grinding performance of resin bonded CBN grinding wheel[J]. Diamond & Abrasives Engineering, 2017, 37(3): 19-22,34. DOI: 10.13394/j.cnki.jgszz.2017.3.0005 |
| |
| Authors: | LI Kehua XIONG Huajun GAO Yongjuan SHI Linfeng HAN Xue |
| |
| Affiliation: | 1. Sinomach Precision Industry Co., Ltd., Zhengzhou 450001, China;2. Zhengzhou Research Institute for Abrasives & Grinding Co., Ltd., Zhengzhou 450001, China;3. State Key Laboratory of Superabrasives, Zhengzhou 450001, China |
| |
| Abstract: | The compressive fracture strength, toughness index (TI) and thermal toughness index (TTI) data of 6kinds of different CBN abrasive grains are studied, and these grains are made into resin bonded CBN grinding wheel, respectively.The grinding ratios of different CBN abrasives on different materials, such as cast iron, high speed steel, stainless steel and nitride stainless steel are researched.Resultsshow that at the same condition of wheel binders and production process, grinding ratios of different CBN abrasive grains show the dramatic differences.Grinding ratios of resin bonded CBN wheels for grinding the cast iron and high speed steel are relatively higher, while its grinding ratios for grinding the stainless steel and nitride stainless steel are lower.It is also found that grinding performances of CBN-B1500and CBN850 abrasive are relatively better for four materials.In conclusion, because of CBN grains in the grinding wheel are fixed by the mechanical insertion force of the resin binder, and so CBN grains with rough surface and moderate compressive fracture strength are better choice. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《金刚石与磨料磨具工程》浏览原始摘要信息 |
|
点击此处可从《金刚石与磨料磨具工程》下载免费的PDF全文 |
|
