| 阀芯行程对角座阀流量特性影响的数值研究 |
| |
| 引用本文： | 王洋定,郑智剑. 阀芯行程对角座阀流量特性影响的数值研究[J]. 液压与气动, 2018, 0(6): 44-48. DOI: 10.11832/j.issn.1000-4858.2018.06.009 |
| |
| 作者姓名： | 王洋定 郑智剑 |
| |
| 作者单位： | 1. 宁波市产品质量监督检验研究院， 浙江宁波315000；2. 国家智能制造装备产品质量监督检验中心（浙江）， 浙江宁波315800 |
| |
| 基金项目： | 国家质检总局科技计划(2016QK085) |
| |
| 摘 要： | 采用数值模拟和实验研究相结合的方法，研究阀芯行程对角座阀流量特性的影响。将阀芯行程为10 mm和14 mm时阀内介质流量的测试数据和数值计算结果进行对比，验证了数值模拟的准确性。在此基础上，对不同行程条件下阀内的速度场、压力场和流动旋涡进行分析。结果表明：随着阀芯行程的增加，阀门出口处的低压区域逐渐向下游移动，阀内的高流速区域更集中，流动旋涡更规则；因此，在较大的行程条件下，阀内介质的流动稳定性更好，流动阻力更小，具有更高的流量系数；在阀芯弹簧受力允许的条件下，应尽可能增加阀芯行程，提高阀门流通能力。
|
| 关 键 词： | 角座阀 流量试验 数值计算 流量特性 流阻特性 |
| 收稿时间： | 2018-05-23 |
Experimental and Numerical Research on Influence of Spool Stroke on Flow Characteristics of Angle Seat Valve |
| |
| WANG Yang-ding,ZHENG Zhi-jian. Experimental and Numerical Research on Influence of Spool Stroke on Flow Characteristics of Angle Seat Valve[J]. Chinese Hydraulics & Pneumatics, 2018, 0(6): 44-48. DOI: 10.11832/j.issn.1000-4858.2018.06.009 |
| |
| Authors: | WANG Yang-ding ZHENG Zhi-jian |
| |
| Affiliation: | 1. Ningbo Academy of Product Quality Supervision & Inspection, Ningbo, Zhejiang315500; 2. National Intelligent Manufacturing Equipment Quality Supervision & Inspection Center (Zhejiang), Ningbo, Zhejiang315800 |
| |
| Abstract: | We study the influence of valve core stroke on flow characteristics of angle seat valve by combining numerical simulation with experimental research. The flow rates data with the valve core of 10 mm and 14 mm obtained from numerical simulation and experiments are compared. Then accuracy of the numerical simulation is verified. Further, velocity field, pressure field and flow vortex in the valve under different strokes are analyzed. The results show that with the increase of valve core stroke, the low pressure area at the valve outlet moves downstream gradually. Besides, the more concentrated high velocity area and the more regular flow vortex are found in the valve. Therefore, flow stability is better and flow resistance is smaller under a larger stroke, resulting in a higher flow coefficient. When the force of the valve core spring is within a reasonable range, the valve core stroke should be increased as much as possible to improve valve circulation ability. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《液压与气动》浏览原始摘要信息 |
|
点击此处可从《液压与气动》下载免费的PDF全文 |
