| 基于准直光束的高精度滚转角测量方法研究 |
| |
| 引用本文： | 郝雯霞,吕勇,李晓英,陈青山,耿蕊,张明珠.基于准直光束的高精度滚转角测量方法研究[J].应用光学,2014,35(2):281-285. |
| |
| 作者姓名： | 郝雯霞 吕勇 李晓英 陈青山 耿蕊 张明珠 |
| |
| 作者单位： | 1.北京信息科技大学 仪器科学与光电工程学院,北京100192; |
| |
| 基金项目： | 北京市教委科研计划项目(KM201211232006) |
| |
| 摘 要： | 对于滚转角测量精度低并且难于测量的问题，提出了一种基于准直光束光斑位置变化的高精度滚转角测量方法。当被测物转动时，CCD上2光斑位置随之改变，2个光斑中心连线斜率亦改变。斜率变化由被测物俯仰、偏摆、滚转运动引起。在测量系统中基于自准直原理测量偏摆角和俯仰角，运用相关的算法，消除由偏摆和俯仰运动引起的滚转角误差，从而实现滚转角的精确测量。同时运用Zemax建立系统仿真模型，进行了滚转角的仿真实验测量。将仿真实验结果输入到滚转角解算模型中解算，结果表明:在0～1 800范围内滚转角的解算值与Zemax的设定值完全一致，由此验证了测量方法的可行性及正确性。
|
| 关 键 词： | 光学测量 滚转角 准直光束 仿真 |
| 收稿时间： | 2013/10/25 |
High-precision roll angle measuring method based on collimated beams |
| |
| HAO Wen-xia,LVYong,LI Xiao-ying,CHEN Qing-shan,GENG Rui,ZHANG Ming-zhu.High-precision roll angle measuring method based on collimated beams[J].Journal of Applied Optics,2014,35(2):281-285. |
| |
| Authors: | HAO Wen-xia LVYong LI Xiao-ying CHEN Qing-shan GENG Rui ZHANG Ming-zhu |
| |
| Affiliation: | 1.School of Instrumentation Science&Optoelectronics Engineering,Beijing Information Science＆-Technology University,Beijing 100192,China;2.Shanghai Marine Diesel EngineResearch Institute,Shanghai 200072,China |
| |
| Abstract: | For the problems of low accuracy and difficult measurement in roll angle measurement,a roll angle measuring method based on spot position changes of collimated beams was presented. The positions of the two light spots on the CCD change with the movement of measured object, so does the slope of the line determined by the two light spots. The change of the slope is caused by yawing, pitching and rolling movements. In the measuring system, the pitch angle and yaw angle were measured based on the principle of self-collimation. After the affection of the pitch and yaw were eliminated, the roll angle was accurately measured. A mathematical model of the system was built,and Zemax software was used to establish a system model to simulate roll angle. Simulation results were calculated by the solving model of roll angle. Within the range of 0~1 800″ the results of the mathematical model were exactly consistent with the value of Zemax, so that the feasibility and correctness of measuring method were validated. |
| |
| Keywords: | optical measuring roll angle collimated beam simulation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《应用光学》浏览原始摘要信息 |
|
点击此处可从《应用光学》下载全文 |
|
