| 大口径非球面元件磁流变加工稳定性研究 |
| |
| 引用本文： | 袁志刚,唐才学,陈贤华,侯晶,郑楠,邓文辉.大口径非球面元件磁流变加工稳定性研究[J].强激光与粒子束,2014,26(5):052012-186. |
| |
| 作者姓名： | 袁志刚 唐才学 陈贤华 侯晶 郑楠 邓文辉 |
| |
| 作者单位： | 1.中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621 900 |
| |
| 摘 要： | 重点分析了非球面元件磁流变加工的动态稳定性影响因素。设计了非球面元件的自动装调定位系统,提高了装调精度。采用一种拟合光栅式加工的新方法来验证其效果,通过测量元件表面形成的直线沟壑深度、宽度波动比例来评价去除的动态稳定性。在400 mm×400 mm口径的方形非球面元件上进行面形收敛验证实验,波长λ为632.8 nm时,加工后的透射波前误差PV值达到0.331λ,低频透射波前梯度误差GRMS值达到了0.008λ/cm。
|
| 关 键 词： | 磁流变 非球面 面形精度 动态稳定性 |
| 收稿时间： | 2013/9/10 |
Magnetorheological finishing removal stability of large aperture aspherical optics |
| |
| Affiliation: | 1.Research Center of Laser Fusion,CAEP,P.O.Box 919-988,Mianyang,621900,China |
| |
| Abstract: | In this paper, the factors of dynamic stability of the removal function were analyzed. In order to improve the precision of magnetorheological finishing (MRF), an automatic positioning system of aspherical optics was designed. A new approach was used for evaluating dynamic characteristics of removal function. At the same time, a verification experiment was carried out on 400 mm400 mm square aspheric, the PV of the surface precision was 0.331 and the GRMS value was 0.008 /cm. The ability of aspherical optics of the magneto-rheological processing was verified. |
| |
| Keywords: | magnetorheological finishing aspherical optics surface precision dynamic stability |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载全文 |
|
