| CuNi90/10承插焊三通成形过程数值模拟与工艺优化 |
| |
| 引用本文： | 杨青云, 苑伟, 马俊普, 张志远. CuNi90/10承插焊三通成形过程数值模拟与工艺优化[J]. 材料开发与应用, 2021, 36(6): 26-30,35. |
| |
| 作者姓名： | 杨青云 苑伟 马俊普 张志远 |
| |
| 作者单位： | 中国船舶重工集团公司第七二五研究所, 河南 洛阳 471023 |
| |
| 基金项目： | 河南省自然科学基金资助项目（202300410005） |
| |
| 摘 要： | 基于Deform-3D，建立了CuNi90/10承插焊三通成形热力耦合有限元模型，对比分析了冲头形状、推制速度、初始温度、摩擦系数等因素对水平载荷的影响，结果表明，柱状凸面冲头成形质量最好，最优的推制速度为40 mm/s，初始温度950~1 000℃，摩擦系数越小越有利于成形。
|
| 关 键 词： | 承插焊三通 热成形 数值模拟 Deform-3D |
| 收稿时间： | 2021-04-08 |
Numerical Simulation and Process Optimization on Hot Forming for CuNi90/10 Sock Welding Tee |
| |
| YANG Qingyun, YUAN Wei, MA Junpu, ZHANG Zhiyuan. Numerical Simulation and Process Optimization on Hot Forming for CuNi90/10 Sock Welding Tee[J]. Development and Application of Materials, 2021, 36(6): 26-30,35. |
| |
| Authors: | YANG Qingyun YUAN Wei MA Junpu ZHANG Zhiyuan |
| |
| Affiliation: | Luoyang Ship Material Research Institute, Luoyang 471023, China |
| |
| Abstract: | Aiming at the prominent problem of low material utilization and low production efficiency in the forming process of CuNi90/10 sock welding tee, a new hot forming technology is presented, and a thermal mechanical FEM model is established based on the software Deform-3D, the effects of punch shape, feeding speed, initial temperature of workpiece and friction coefficient on horizontal load is comparatively analyzed. Results show that the quality of cylindrical convex surface of punch is the best, the optimal feeding speed is 40 mm/s, and the suitable initial temperature is 950℃~1 000℃. Besides, the smaller the friction coefficient is, the better the forming quality. |
| |
| Keywords: | sock welding tee hot forming numerical simulation Deform-3D |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《材料开发与应用》浏览原始摘要信息 |
|
点击此处可从《材料开发与应用》下载免费的PDF全文 |
