| 大型锻件内部缺陷演变行为的跨尺度模拟方法 |
| |
| 引用本文： | 祁荣胜,康冬,金淼,郭宝峰,刘鑫刚. 大型锻件内部缺陷演变行为的跨尺度模拟方法[J]. 中国机械工程, 2015, 26(20): 2821-2826 |
| |
| 作者姓名： | 祁荣胜 康冬 金淼 郭宝峰 刘鑫刚 |
| |
| 作者单位： | 先进锻压成形技术与科学教育部重点实验室(燕山大学),秦皇岛,066004 |
| |
| 基金项目： | 河北省高等学校创新团队领军人才培育计划资助项目(LJRC012) |
| |
| 摘 要： | 针对大型锻件内部缺陷，提出了一种跨尺度模拟计算方法，即体胞模型法。以孔洞缺陷为例，论述了该方法的原理及应用思路。利用该方法对某锻件的孔洞缺陷演变行为进行了模拟计算，分析了孔洞缺陷的演变规律及其周围应变分布情况，并进行了人工预制孔洞的铅块变形实验。研究结果表明，孔洞随锻件变形程度增加而逐渐趋向闭合，其闭合程度与锻件应变分布情况有关；物理实验与数值模拟结果吻合度较高，体胞模型法的模拟计算较为准确;体胞模型法能够较好地解决大型锻件成形过程中内部缺陷的跨尺度数值模拟问题。
|
| 关 键 词： | 大型锻件 内部缺陷 跨尺度 体胞模型法 |
Trans-scale Simulation Method of Evolution Behavior of Internal Defects in Large Forgings |
| |
| Qi Rongsheng,Kang Dong,Jin Miao,Guo Baofeng,Liu Xingang. Trans-scale Simulation Method of Evolution Behavior of Internal Defects in Large Forgings[J]. China Mechanical Engineering, 2015, 26(20): 2821-2826 |
| |
| Authors: | Qi Rongsheng Kang Dong Jin Miao Guo Baofeng Liu Xingang |
| |
| Affiliation: | Key Laboratory of Advanced Forging & Stamping Technology and Science,Ministry of Education(Yanshan University),Qinhuangdao,Hebei,066004 |
| |
| Abstract: | For large forging internal defects, a multi-scale simulation method was put forward,which was named as body cell model method. In the case of hole defects,the principles and applications of the body cell model method were discussed.Based on the body cell model method,the evolution behavior of hole defects in the particular forging was simulated. The evolution rule of hole defects and strain distribution around the hole defects were analyzed. And the lead block deformation experiments were carried out,which had prefabricated artificial holes.The results show that holes gradually incline to closure with the increase of forging deformation degree, and the closure degree of holes is related to strain distribution in forgings.Results identical degree between physical experiments and numerical simulations are conceived is better. The simulation calculation of body cell model method is more accurate. Through the body cell model method, it is able to solve multi-scale calculation and analysis of internal defects in the forming process of large forgings. |
| |
| Keywords: | large ,forging internal defect trans-scale body cell ,model method, |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载免费的PDF全文 |
|
