首页 | 官方网站   微博 | 高级检索  
     

中国东北浅覆盖区地质填图物化探信息协同辅助技术
引用本文:赵玉岩,李兵,陆继龙,郝立波,赵禹,王东明.中国东北浅覆盖区地质填图物化探信息协同辅助技术[J].吉林大学学报(地球科学版),2018,48(1):318-333.
作者姓名:赵玉岩  李兵  陆继龙  郝立波  赵禹  王东明
作者单位:1. 吉林大学地球探测科学与技术学院, 长春 130026;2. 中国地质调查局西安地质调查中心, 西安 710054;3. 黑龙江省区域地质调查所, 哈尔滨 150080
基金项目:吉林大学优秀青年教师培养计划(419080500564),中国地质调查局项目(12120114042501)Supported by the Training Program for Outstanding Young Teachers in Jilin University(419080500564),the Program of China Geological Survey(12120114042501)
摘    要:针对中国东北浅覆盖区地质露头少、填图效率不高、精确度和准确度较低的问题,开发了物化探信息协同辅助技术并应用于地质体类型的识别。在以覆盖层较薄、面积广大、物理风化为主、土壤位移较小为特点的东北森林沼泽浅覆盖区,利用土壤化学成分和航磁信息识别下伏地质体是可行的。基于这一前提,可将指定研究区划分为一定数量的统计单元,在各单元内,通过数学统计方法产生众数、宽度、变化频率、偏度、峰度等航磁特征参数并将其标准化,将化探指标酸度、碱度、钙含量、铝含量、钙镁含量、硅铝含量、镁铁含量、微量元素含量等特征参数标准化;然后采用逐级分类的方法,每级选择有效的物化探特征参数,在当前级别上实现单元划分并将数据分为不同数据集,在下一级别划分时重新有针对地选择参数,分别对各数据集进一步分类,直到分类结果对应较明确的地质填图单元,并最终编制出解译图。以黑龙江省大兴安岭地区某典型森林沼泽浅覆盖区为例进行了方法验证,将结果与已知地质信息比对分析,认为地质体单元识别结果与已知信息基本吻合,使得地质体类型识别更精确,边界更清晰,可为区域地质研究提供新线索。

关 键 词:浅覆盖区  地质填图  物探  化探  分类  地质体识别  
收稿时间:2017-01-21

Geochemical and Geophysical Information Integration Technology for Geological Mapping at Shallow Overburden Area in Northeast China
Zhao Yuyan,Li Bing,Lu Jilong,Hao Libo,Zhao Yu,Wang Dongming.Geochemical and Geophysical Information Integration Technology for Geological Mapping at Shallow Overburden Area in Northeast China[J].Journal of Jilin Unviersity:Earth Science Edition,2018,48(1):318-333.
Authors:Zhao Yuyan  Li Bing  Lu Jilong  Hao Libo  Zhao Yu  Wang Dongming
Affiliation:1. College of GeoExploration Science and Technology, Jilin University, Changchun 130026, China;2. Xi'an Institute of Geology and Mineral Resources, China Geological Survey, Xi'an 710054, China;3. Heilongjiang Regional Institute of Geological Survey, Harbin 150080, China
Abstract:Aiming at the difficulties of geological mapping at shallow cover areas Northeast China,such as fewer outcrops,lower efficiency,lower precision and accuracy,we developed a geophysical and geochemical information integration technology for geological body identification.It is suitable for the shallow cover area in Northeast China,where it is huge with the features of strong physical weathering and small soil displacement.In this method,the entire study area is divided into a number of statistical units,the regional aeromagnetic information in each unit is transformed into characteristic parameters,such as mode,interquartile range,frequency,skewness,kurtosis,and the regional geochemical information in each unit is transformed into the characteristic parameters,such as acidity,alkalinity,calcium content,aluminum content,content of calcium and magnesium,content of aluminum and silicon,content of magnesium and iron,and individual trace elements.Then,all the units are classified step by step based on their characteristic parameters to finally identify geological bodies.Taking somewhere in a typical shallow overburden area in Northeast China as an example,we applied this method.By comparing the results with the known geological information,the recognition results of geologic units are in good agreement with the known information.This method can provide richer geological information and new clues for regional geological research.
Keywords:shallow overburden area  geological mapping  geophysical exploration  geochemical exploration  classification  geological body identification  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《吉林大学学报(地球科学版)》浏览原始摘要信息
点击此处可从《吉林大学学报(地球科学版)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号