首页 | 官方网站   微博 | 高级检索  
     

空气源热泵机组稳态仿真数学模型的建立与实验验证
引用本文:王伟,马最良,姚杨.空气源热泵机组稳态仿真数学模型的建立与实验验证[J].流体机械,2006,34(5):52-56,73.
作者姓名:王伟  马最良  姚杨
作者单位:1. 北京工业大学,北京,100022;哈尔滨工业大学,黑龙江哈尔滨,150090
2. 哈尔滨工业大学,黑龙江哈尔滨,150090
基金项目:国家自然科学基金项目(5027802);北京工业大学博士启动基金项目(00193)
摘    要:为解决空气源热泵机组运行工况变化时,优化设计与性能预测等问题,建立了机组4个主要部件的稳态仿真数学模型,其中压缩机采用基于BP算法的人工神经网络方法,换热器采用分区集中参数方法建模,同时给出换热器中的换热关联式模型以及系统仿真流程。稳态仿真结果与28组实验数据相比,机组运行特性与供暖特性均得以准确模拟,验证了所建模型的可靠性与通用性。

关 键 词:空气源热泵机组  稳态仿真  分区集中参数  实验验证
文章编号:1005-0329(2006)05-0052-05
收稿时间:2005-09-15
修稿时间:2005-09-152005-10-10

Test Validation of General Steady-state Simulation Model for Air Source Heat Pump Unit
WANG Wei,MA Zui-liang,YAO Yang.Test Validation of General Steady-state Simulation Model for Air Source Heat Pump Unit[J].Fluid Machinery,2006,34(5):52-56,73.
Authors:WANG Wei  MA Zui-liang  YAO Yang
Affiliation:1. Beijing University of Technology, Beijing 100022, China; 2. Harbin University of Technology, Harbin 150090, China
Abstract:A general steady-state simulation model was presented for predicting the performance of air source heat pump unit in low ambient operating conditions. Mathematic models of four main components in the unit were set up. An error back-propagation artificial neural network model was built for the compressor. Three-zone lumped parameter model was developed for the heat-exchangers. The good agreement between simulation and experimental results indicated that the model could be successfully used in performance predicting of the air source heat pump.
Keywords:air source heat pump  steady-state simulation  three-zone lumped parameter  test validation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号