Study of surface quality in machining nickel-based alloy Inconel 718 |
| |
Authors: | YiHang Fan ZhaoPeng Hao MinLi Zheng FengLian Sun ShuCai Yang |
| |
Affiliation: | 1. National and Local United Engineering Laboratory of High-efficiency Cutting and Tool Technology, Harbin University of Science and Technology, Harbin, 150080, China 2. School of Materials Science and Engineering, Harbin University of Science and Technology, Harbin, 150080, China 3. School of Mechanics Engineering, Harbin Institute of Technology, Harbin, 150001, China
|
| |
Abstract: | In machining operation, the surface quality is one of the most important requirements for many workpieces. Because of the special physical and chemical properties, good-machined surface quality becomes a key issue to solve in machining Inconel 718. In this paper, PVD-TiAlN-coated carbide tools were used to turn Inconel 718. Based on observing the tool wear and machined surface morphology, the main factors affecting surface quality at different cutting speeds were analyzed. The optimal cutting temperature was calculated, according to the above analysis and Archard adhesion wear model, and further cutting parameters optimization was conducted, on the basis of the proposed optimal cutting temperature. The optimized cutting parameters based on optimal cutting temperature can be considered to improve surface quality. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|