| 切向车铣铝合金回转体工件表面形貌的试验研究 |
| |
| 引用本文： | 姜增辉,段宗玉,杨大卫.切向车铣铝合金回转体工件表面形貌的试验研究[J].制造技术与机床,2010(2). |
| |
| 作者姓名： | 姜增辉 段宗玉 杨大卫 |
| |
| 作者单位： | 沈阳理工大学机械工程学院,辽宁,沈阳,110159 |
| |
| 基金项目： | 辽宁省自然科学基金项目 |
| |
| 摘 要： | 为研究切向车铣加工铝合金回转体工件的表面形貌,通过试验对轴向进给量和周向进给量对表面粗糙度和表面纹理的影响规律进行了研究。结果表明,轴向和周向进给量的增大都可导致表面粗糙度值增大;周向进给量比轴向进给量对表面纹理的影响更加显著,不但可使纹理间距发生变化,还可改变纹理的方向,并产生网格状表面纹理。
|
| 关 键 词： | 切向车铣 表面粗糙度 表面纹理 轴向进给量 周向进给量 |
Experimental Research on The Surface Topography of The Aluminium Alloy Rotary Workpiece Machining by The Tangential Turn-milling |
| |
| JIANG Zenghui,DUAN Zongyu,YANG Dawei.Experimental Research on The Surface Topography of The Aluminium Alloy Rotary Workpiece Machining by The Tangential Turn-milling[J].Manufacturing Technology & Machine Tool,2010(2). |
| |
| Authors: | JIANG Zenghui DUAN Zongyu YANG Dawei |
| |
| Affiliation: | JIANG Zenghui,DUAN Zongyu,YANG Dawei (School of Mechanical Engineering,Shenyang Ligong University,Shenyang 110159,CHN) |
| |
| Abstract: | In order to study on the surface topography of the Aluminium alloy rotary workpiece machining by the tangential turn-milling, it is researched by the experiment to the axial feed rates and the circumferential feed rates influence on the surface roughness and the surface texture. The results show that the surface roughness increases as the axial feed rates and the circumferential feed rates increasing. Circumferential feed rates influence more obviously than the axial feed rates on the surface texture, it ca... |
| |
| Keywords: | Tangential Turn-milling Surface Roughness Surface Texture Axial Feed Rates Circumferential Feed Rates |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
