| 汽车变速器关键轴承压装质量控制研究 |
| |
| 引用本文： | 陆成刚,陈书宏,陈平.汽车变速器关键轴承压装质量控制研究[J].机械设计与制造,2011(4). |
| |
| 作者姓名： | 陆成刚 陈书宏 陈平 |
| |
| 作者单位： | 1. 中国科学院沈阳自动化研究所工业信息学重点研究室,沈阳,110016;中国科学院研究生院,北京,100039
2. 中国科学院沈阳自动化研究所,工业信息学重点研究室,沈阳,110016 |
| |
| 基金项目： | 国家863高技术计划项目 |
| |
| 摘 要： | 对汽车变速器装配过程质量控制进行研究,指出汽车变速器装配生产线质量控制关键过程及关键控制变量,并对变速器装配中轴承压装过程及其控制变量特性使用工程力学方法进行了详细分析,根据分析设计了其质量控制方法并进行实现.采用统计过程控制的方法能有效提高变速器装配生产线装配质量.
|
| 关 键 词： | 轴承压装 变速器装配 |
Research on quality control of the key bearing press-mounting of car transmission |
| |
| LU Cheng-gang,CHEN Shu-hong,CHEN Ping.Research on quality control of the key bearing press-mounting of car transmission[J].Machinery Design & Manufacture,2011(4). |
| |
| Authors: | LU Cheng-gang CHEN Shu-hong CHEN Ping |
| |
| Affiliation: | LU Cheng-gang1,2,CHEN Shu-hong1,CHEN Ping1(1Key Laboratory of Industrial Informatics,Shenyang Institute of Automation,Chinese Academy of Sciences,Shenyang 110016,China)(2Graduate School of the Chinese Academy of Sciences,Beijing 100039,China) |
| |
| Abstract: | Research on the quality control of the car transmission assembly process,point out the key processes and the key control variable of the quality control.And make a detailed analysis on the bearing press-fit process and its control variable characteristic by using of engineering mechanics method.Based on the analysis,design its quality control methods and achieve it.Use the static process control method can improve the assembly quality of the transmission assembly line effectively. |
| |
| Keywords: | SPC |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
