Unique regenerative chatter in wiper-turning operation with burnishing process Part 2: Experimental verification of predicted generation mechanism,critical stability,and characteristics

In this paper, the predicted generation mechanism, chatter stability, and characteristics of the unique regenerative chatter with the burnishing process in wiper-turning operations are verified experimentally. It was found in the first part of the paper that the vibration regenerates in the burnishing process by the wiper part of the insert causing a novel type of chatter. In this second part, this chatter phenomenon is investigated in an experimental manner to verify its mechanism. The specific burnishing force, which is a gain factor characterizing the burnishing process, is determined by the Hertzian contact law. In addition, the specific cutting force is measured by a cutting test, the compliance of the flexible structure is measured by a hammering test, and the residual compliance is measured by a static indentation test. Then, experiments are conducted where the tilt angle and the feed rate are varied to find the critical stability. The conducted chatter experiments prove that the predicted generation mechanism, critical stability, and characteristics are true.