| 基于Deform-3D准干式深孔BTA刀具钻削的仿真研究 |
| |
| 引用本文： | 李道波,王彪,李建,付力.基于Deform-3D准干式深孔BTA刀具钻削的仿真研究[J].工具技术,2012,46(9):58-62. |
| |
| 作者姓名： | 李道波 王彪 李建 付力 |
| |
| 作者单位： | 中北大学,太原市030051 |
| |
| 基金项目： | 教育部高等学校博士学科点专项科研基金资助项目（20050204JJ）;山西省工业科技攻关计划项目（20080209ZX）;中北大学科学基金项目（准于式深孔镗削排屑机理及仿真研究） |
| |
| 摘 要： | 采用Deform-3D有限元分析软件对准干式单刃内排屑BTA钻削做了仿真研究。应用Deform-3D软件设置模拟参数为干式钻削,在不同的切削用量情况下对切削力的大小、刀具磨损以及切削温度场进行了仿真分析,讨论了断屑判据以及分屑的形成过程,为准干式深孔加工的切削参数和刀具参数的进一步优化提供了依据。
|
| 关 键 词： | Deform-3D BTA刀具 切削力 刀具磨损 切削温度 断屑 |
Simulation of Near-dry Deep Hole BTA Drilling Based on Deform-3D |
| |
| Li Daobo
,
Wang Biao
,
Li Jian
,
Fu Li.Simulation of Near-dry Deep Hole BTA Drilling Based on Deform-3D[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2012,46(9):58-62. |
| |
| Authors: | Li Daobo Wang Biao Li Jian Fu Li |
| |
| Abstract: | An emulation study of the drilling by near-dry BTA with single tip is conducted by using FEM analysis software Deform- 3D. According to application of Deform -3D software simulation parameters are set as dry drilling, the distributed situation of cutting force, cutting temperature and tool wear in different cutting parameters are analyze. By dis- cussing the forming process of the chip-breaking criterion and chip separation, further optimization of parameters cutting and tool for near-dry deep hole drilling provide the better basis. |
| |
| Keywords: | Deform- 3D BTA cutting force tool wear cutting temperature chip-breaking |
| 本文献已被 维普 万方数据 等数据库收录！ |
