| 圆柱度仪测量圆柱体锥度及跳动的研究 |
| |
| 引用本文： | 赵则祥,李学新,张济洲,高作昆.圆柱度仪测量圆柱体锥度及跳动的研究[J].工具技术,2006,40(6):63-65. |
| |
| 作者姓名： | 赵则祥 李学新 张济洲 高作昆 |
| |
| 作者单位： | 中原工学院 |
| |
| 摘 要： | 利用在圆柱度仪上采用两截面和多截面测量法测得的数据,建立适用于圆柱体锥度评定的几种模型,并建立了圆柱体端面和径向跳动在圆柱度仪上测量与评定的模型。
|
| 关 键 词： | 圆柱度仪 锥度 跳动 |
| 收稿时间： | 2005-08 |
| 修稿时间： | 2005-08 |
Study on Measurement of Cylinder's Taper and Run-out on Cylindricity Measuring Instrument |
| |
| Zhao Zexiang, Li Xuexin ,Zhang Jizhou et al.Study on Measurement of Cylinder''''s Taper and Run-out on Cylindricity Measuring Instrument[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2006,40(6):63-65. |
| |
| Authors: | Zhao Zexiang Li Xuexin Zhang Jizhou |
| |
| Affiliation: | Zhao Zexiang Li Xuexin Zhang Jizhou et al |
| |
| Abstract: | Several evaluation models of cylinder's taper are built based on the data measured on cylindricity measuring instrument using a double-section measuring method and a multi-section measuring method. According to the definition of run-out, the evaluation models of end run-out and radial run-out of cylinder are established. |
| |
| Keywords: | cylindricity measuring instrument taper run-out |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
