首页 | 官方网站   微博 | 高级检索  
     

无阀控自配流液压冲击器系统建模与仿真
引用本文:刘忠,彭金艳,梁承杰,李伟.无阀控自配流液压冲击器系统建模与仿真[J].中国机械工程,2010(23).
作者姓名:刘忠  彭金艳  梁承杰  李伟
作者单位:常熟理工学院;湖南师范大学;
基金项目:湖南省教育厅重点科研基金资助项目(2008A047)
摘    要:提出一种新型无阀控自配流液压冲击器,分析了它的结构原理及特点。分别建立了冲击器回程和冲程时的数学模型;运用AMESim建立仿真模型并进行动态仿真,根据仿真曲线详细分析了系统供液流量及氮气腔初始充气压力对冲击器工作性能的影响。结果表明:在氮气腔初始充气压力一定时,供液流量必须达到一定值才能启动冲击器,在一定范围内,会出现使冲击性能最佳的流量值;当供液流量一定时,氮气腔初始充气压力较低时,冲击能和冲击效率较低;充气压力过高时,冲击器无法开启。该冲击系统在供液流量为75L/min、氮气腔初始充气压力为2.0MPa时,冲击性能最佳。

关 键 词:无阀自配流液压冲击器  数学模型  AMESim  动态仿真  

Modeling and Simulation of Valveless Hydraulic Impactor
Liu Zhong , Peng Jinyan Liang Chengjie Li Wei .Changshu Institute of Technology,Changshu,Jiangsu, .Hunan Normal University,Changsha.Modeling and Simulation of Valveless Hydraulic Impactor[J].China Mechanical Engineering,2010(23).
Authors:Liu Zhong  Peng Jinyan Liang Chengjie Li Wei Changshu Institute of Technology  Changshu  Jiangsu  Hunan Normal University  Changsha
Affiliation:Liu Zhong 1,2 Peng Jinyan 2 Liang Chengjie 2 Li Wei 2 1.Changshu Institute of Technology,Changshu,Jiangsu,215500 2.Hunan Normal University,Changsha,410081
Abstract:A new type valveless hydraulic impactor was proposed,and its structure,operational principles and characteristics were analyzed.The mathematical models of return stroke and impact stroke were established respectively.By means of AMESim,the simulation model was obtained and the dynamic simulation was carried out.The influence of the providing flow rate and the initial pressure of the nitrogen chamber on the working performance was studied.While the initial pressure of the nitrogen chamber is constant,the hyd...
Keywords:valveless hydraulic impactor  mathematical model  AMESim  dynamic simulation  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号