|
|||||
|
|
| PTFE瓦与巴氏合金瓦推力轴承热弹流特性的对比分析 | |
| 引用本文： | 方静辉,汪久根,赵志强,陈志祥,严锦丽.PTFE瓦与巴氏合金瓦推力轴承热弹流特性的对比分析[J].轴承,2012(4):29-32,41. |
| 作者姓名： | 方静辉 汪久根 赵志强 陈志祥 严锦丽 |
| 作者单位： | 1. 浙江富春江水电设备股份有限公司,杭州310013;浙江大学 机械系,杭州310027 2. 浙江大学 机械系,杭州,310027 3. 浙江富春江水电设备股份有限公司,杭州,310013 |
| 摘 要： | 采用热弹流润滑模型对比分析PTFE瓦和巴氏合金瓦推力轴承的润滑特性。计算结果表明,采用PTFE瓦后,推力轴承中油膜的最高压力得到有效降低,油膜压力分布更加均匀,推力轴承中润滑油膜温升会提高;推力瓦瓦体的温度会大幅度下降,其整体热变形也会相应减小;适当加工推力瓦进、出油边的楔形面,可以有效提高最小润滑油膜厚度;油膜入口区域的回流现象将减弱甚至可能消失;必需润滑油量得以降低,轴承的润滑损耗减小。 |
| 关 键 词： | 滑动轴承 推力轴承 热弹流润滑 PTFE 巴氏合金 |
Comparative Analysis on Thrust Bearings with PTFE Pad and Babbitt Alloy Pad Based on TEHD Modeling |
|
| FANG Jing-hui , WANG Jiu-gen , ZHAO Zhi-qiang , CHEN Zhi-xiang , YAN Jin-li.Comparative Analysis on Thrust Bearings with PTFE Pad and Babbitt Alloy Pad Based on TEHD Modeling[J].Bearing,2012(4):29-32,41. | |
| Authors: | FANG Jing-hui WANG Jiu-gen ZHAO Zhi-qiang CHEN Zhi-xiang YAN Jin-li |
| Affiliation: | 1 (1.Zhejiang Fuchunjiang Hydropower Equipment Co.,Ltd.,Hangzhou 310013,China;2.Department of Mechanical Engineering,Zhejiang University,Hangzhou 310027,China) |
| Abstract: | The lubricating properties of thrust bearings with PTFE pad and Babbitt alloy pad are comparatively analyzed by using thermo-elastohydrodynamic(TEHD) lubrication model.The calculation results show that the PTFE pad has advantages over Babbitt alloy pad in several aspects,such as lower maximum fluid pressure,more even pressure distribution.The bulk temperature of pad is remarkable lower with higher oil temperature,resulting in less thermal distortion of thrust pad.With the wedge design at inlet and outlet sides,the minimum film thickness is thicker,and the zone of inverse flow in inlet region is smaller even disappears.The minimum oil quantity is less,yielding less power consumption. |
| Keywords: | sliding bearing thrust bearing TEHD lubrication PTFE Babbitt alloy |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
