| 五轴数控加工叶轮轮毂曲面刀位轨迹的规划 |
| |
| 引用本文： | 姜虹,于源.五轴数控加工叶轮轮毂曲面刀位轨迹的规划[J].机械传动,2006,30(6):81-83. |
| |
| 作者姓名： | 姜虹 于源 |
| |
| 作者单位： | 北京交通大学机械与电子控制工程学院,北京,100044 |
| |
| 摘 要： | 对整体叶轮轮毂面的刀位轨迹排布进行了研究.首先运用分层的思想和旋转法得到均布于等长叶片叶轮轮毂面上的刀位轨迹;并在其基础上采用区域划分法对交错叶片叶轮轮毂曲面的刀位进行规划,得到C1连续的刀位轨迹.
|
| 关 键 词： | 五轴数控加工 整体叶轮 刀位轨迹 |
| 文章编号： | 1004-2539(2006)06-0081-03 |
| 修稿时间： | 2006年4月1日 |
Tool - path Scheduling on the Hub Surface of the Impellers for 5 - axis NC Machining |
| |
| Jiang Hong,Yu Yuang.Tool - path Scheduling on the Hub Surface of the Impellers for 5 - axis NC Machining[J].Journal of Mechanical Transmission,2006,30(6):81-83. |
| |
| Authors: | Jiang Hong Yu Yuang |
| |
| Abstract: | Generation of tool-path on the hub surface of impeller is researched. Referring to hub surface, at first, the equably tool-path on the hub surface is obtained by the method of separating the layers and rotation for the impeller with the full blades. Then a method of dividing field is suggested to schedule tool-path for the impeller with the splitter blades and obtain the tool-path of C1 continuality. |
| |
| Keywords: | 5-Axis NC Machining Impeller tool-path |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
