| 粉末触媒、石墨配比对合成金刚石质量的影响 |
| |
| 引用本文： | 邓福铭,刘瑞平,张华,刘晓慧,张丹,王强,赵晓凯.粉末触媒、石墨配比对合成金刚石质量的影响[J].珠宝科技,2011(1):27-30. |
| |
| 作者姓名： | 邓福铭 刘瑞平 张华 刘晓慧 张丹 王强 赵晓凯 |
| |
| 作者单位： | 中国矿业大学（北京）超硬刀具材料研究所,北京100083 |
| |
| 摘 要： | 将不同配比的Fe70Ni30粉末触媒与石墨混合压制成粉末触媒合成棒,在国产六面顶压机上进行金刚石高温高压合成实验,并对合成的金刚石单产、粒度分布、晶形、抗压强度值、TI、TTI值进行了对比测试与观察分析。结果表明,对Fe70Ni30粉末触媒合成棒而言,当合成棒中Fe70Ni30粉末触媒含量为30%时合成金刚石的单产达到最大值,金刚石的TI、TTI值较高且TI/TTI差值最小,热冲击韧性最好。
|
| 关 键 词： | 粉末触媒 石墨 配比 金刚石合成 金刚石质量 |
Influences of catalyst powder and graphite with different ratio on the quality of synthetic diamond |
| |
| DENG Fu-ming,LIU Rui-ping,ZHANG Hua,LIU Xiao-hui,ZHANG Dan,WANG Qiang,ZHAO Xiao-kai.Influences of catalyst powder and graphite with different ratio on the quality of synthetic diamond[J].Jewellery Science and Technology,2011(1):27-30. |
| |
| Authors: | DENG Fu-ming LIU Rui-ping ZHANG Hua LIU Xiao-hui ZHANG Dan WANG Qiang ZHAO Xiao-kai |
| |
| Affiliation: | (Institute of Super-hard Cutting Tool Materials,China University of Miningand Technology,Beijing 100083,China) |
| |
| Abstract: | The synthesizing experiment of diamond was carried out at domestic cubic press by using Fe70Ni30 catalyst powder with different contents of graphite in the synthesizing blocks.The yield of diamond per synthetic rod,the grain distribution,the shape of the crystal,the crushing load of the compressive test,toughness index（TI） and thermal toughness index（TTI） of diamond were analyzed.The results show that the yield of diamond per synthetic rod,the value of TI,TTI was highest and the difference of TTI and TI was lowest when the ratio of catalyst powder and graphite is controlled to 3∶7. |
| |
| Keywords: | catalyst powder graphite ratio synthetic diamond quality of diamond |
| 本文献已被 维普 等数据库收录！ |
|
