| 炼油厂高温设备的腐蚀与设计选材 |
| |
| 引用本文： | 杨秀峰.炼油厂高温设备的腐蚀与设计选材[J].石油化工腐蚀与防护,2003,20(4):17-20. |
| |
| 作者姓名： | 杨秀峰 |
| |
| 作者单位： | 中国石化集团金陵石油化工设计院,江苏,南京,210033 |
| |
| 摘 要： | 介绍了炼油厂高温设备腐蚀的主要类型和发生部位,主要有高温氧化、催化裂化、延迟焦化、高温烟气管道等;高温部位与含硫介质接触部位的硫化腐蚀;高温氢、高温碳化以及垢物腐蚀等。同时提出了相应的设计选材建议。
|
| 关 键 词： | 高温设备 腐蚀 设计 选材 |
| 文章编号： | 1007-015X(2003)04-0017-04 |
| 修稿时间： | 2002年9月10日 |
Corrosion of Refinery High - temperature Equipment and Material Selection |
| |
| Yang Xiufeng Jinling Petrochemical Design Institute/SINOPEC.Corrosion of Refinery High - temperature Equipment and Material Selection[J].Petrochemical Corrosion and Protection,2003,20(4):17-20. |
| |
| Authors: | Yang Xiufeng Jinling Petrochemical Design Institute/SINOPEC |
| |
| Abstract: | The main corrosion forms and spots in refinery high - temperature equipment are introduced. The major corrosion spots are high -temperature oxidation unit, FCC unit, delayed coker and high - temperature flue gas duct etc. The corrosions are the hydrogen sulfide corrosion in the high - temperature section contacting the sulfur - containing media, high - temperature hydrogen corrosion, high - temperature carbonization and fouling corrosion etc. The corresponding material selection is suggested. |
| |
| Keywords: | high - temperature equipment corrosion design material selection |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
