首页 | 官方网站   微博 | 高级检索  
     

Pd/Al_2O_3催化加氢制备1-氨基蒽醌
引用本文:张虎,孙海兵,黄敏.Pd/Al_2O_3催化加氢制备1-氨基蒽醌[J].精细石油化工进展,2014(3):40-43.
作者姓名:张虎  孙海兵  黄敏
作者单位:南京金陵石化工程设计有限公司,南京210009
摘    要:用Pd/Al2O3作催化剂,在混合溶剂体系催化加氢1-硝基蒽醌制1-氨基蒽醌,并用正交试验讨论了反应温度、搅拌速度、反应物浓度等工艺条件对产品纯度的影响,得出最佳工艺条件:1-硝基蒽醌、混合溶剂、Pd/Al2O3的质量比为10∶100∶0.1,反应温度70℃,反应时间80min,氢压1.0 MPa,搅拌速度1 000 r/min。在此条件下,产品纯度高于98.5%,收率达97.5%。

关 键 词:Pd/AlO  催化加氢  -硝基蒽醌  -氨基蒽醌

Preparation of 1-Aminoanthraquinone by Catalytically Hydrogenating 1-Nitroanthraquinone with Pd/Al2O3 Catalyst
Zhang Hu Sun Haibing Huang Min.Preparation of 1-Aminoanthraquinone by Catalytically Hydrogenating 1-Nitroanthraquinone with Pd/Al2O3 Catalyst[J].Advances in Fine Petrochemicals,2014(3):40-43.
Authors:Zhang Hu Sun Haibing Huang Min
Affiliation:Zhang Hu Sun Haibing Huang Min (Nanjing Jinling Petrochemical Engineering Co. Ltd. , Nanjing 210009, China)
Abstract:1 - Aminoanthraquinone was prepared by catalytically hydrogenating 1 - nitroanthraquinone with Pd/A1203 as the catalyst in a mixed solvent system. The effects of reaction temperature, stirring rate and reactant concentration, etc. on product purity were studied in orthogonal tests, and the optimum process conditions were identified as follows: the mass ratio of 1 -nitroanthraquinone, mixed solvent and Pd/A1203 is 10 : 100 : 0.1, reaction temperature is 70℃ , reaction time is 80 rain, hydrogen pressure is 1.0 MPa, and stirring rate is l 000 r/min. The product purity is higher than 98.5% and the yield is 97.5% at such conditions.
Keywords:Pd/A12 03  catalytic hydrogenation  1 - nitroanthraquinone  1 - aminoanthraquinone
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号