| 高电荷态重离子束流产生技术的研究 |
| |
| 引用本文： | 高丽娟,史淑廷,郭刚,刘建成,陈泉,沈东军,惠宁,王贵良,孔福全,范辉,蔡莉,王惠.高电荷态重离子束流产生技术的研究[J].原子能科学技术,2014,48(7):1304-1308. |
| |
| 作者姓名： | 高丽娟 史淑廷 郭刚 刘建成 陈泉 沈东军 惠宁 王贵良 孔福全 范辉 蔡莉 王惠 |
| |
| 作者单位： | 中国原子能科学研究院 核物理研究所，北京102413 |
| |
| 基金项目： | 国家自然科学基金资助项目(11105230) |
| |
| 摘 要： | 为了提高北京HI-13串列加速器束流的硅中射程和LET值，本文开展了高电荷态束流引出技术及pA级弱束流诊断技术研究。采用电刚度和磁刚度模拟技术，配合pA级弱束流束斑观测和束流强度监测技术，获得能量360 MeV、峰总比80%的197Au离子束流，其在Si中的表面LET为86.1 MeV•cm2•mg-1、射程为30.1 μm，满足单粒子效应（SEE）实验的要求，拓展了北京HI-13串列加速器上单粒子效应实验所用离子的能量和LET值范围。
|
| 关 键 词： | 高电荷态 北京HI-13串列加速器 单粒子效应 |
Technique of Producing High Charge State Heavy-ion Beam |
| |
| GAO Li-juan,SHI Shu-ting,GUO Gang,LIU Jian-cheng,CHEN Quan,SHEN Dong-jun,HUI Ning,WANG Gui-liang,KONG Fu-quan,FAN Hui,CAI Li,WANG Hui.Technique of Producing High Charge State Heavy-ion Beam[J].Atomic Energy Science and Technology,2014,48(7):1304-1308. |
| |
| Authors: | GAO Li-juan SHI Shu-ting GUO Gang LIU Jian-cheng CHEN Quan SHEN Dong-jun HUI Ning WANG Gui-liang KONG Fu-quan FAN Hui CAI Li WANG Hui |
| |
| Affiliation: | China Institute of Atomic Energy, P. O. Box 275-18, Beijing 102413, China |
| |
| Abstract: | In order to get the Beijing HI-13 tandem accelerator beam with the higher range and LET in silicon, the techniques of beam route simulating and pico-ampere beam diagnosing were developed. The magnetic rigidity simulation and electric rigidity simulation techniques combined with beam spot observing and beam intensity measuring techniques were used for getting 360 MeV 197Au ion beam with the peak-to-total ratio of 80% in the spectrum. The range of 360 MeV197 Au in silicon is 30.1 μm and the LET is 86.1 MeV•cm2•mg-1. This meets the requirement of single-event effect test, and the beam energy range and LET range in Beijing HI-13 tandem accelerator have been obviously enlarged. |
| |
| Keywords: | high charge state Beijing HI-13 tandem accelerator single-event effect |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《原子能科学技术》浏览原始摘要信息 |
|
点击此处可从《原子能科学技术》下载全文 |
|
