首页 | 官方网站   微博 | 高级检索  
     

地震作用下“板型”高层钢混框架结构响应分析
引用本文:闫安志,孙海丽.地震作用下“板型”高层钢混框架结构响应分析[J].工业建筑,2011(Z1):254-257,282.
作者姓名:闫安志  孙海丽
作者单位:河南理工大学土木工程学院;
基金项目:河南省基础与前沿技术研究项目(072300460040); 河南省重点学科资助项目(504906)
摘    要:义马某气化炉厂房,长56 m,宽19.5 m,高56 m,为"板型"钢筋混凝土框架结构体系。考虑该厂房中设备对系统动力特性的影响,采用大型有限元软件ANSYS对结构的自振特性进行分析。结果表明:结构在第四、五阶模态呈现翘曲模态,充分显示了结构的厚板特征。通过对3种地震波作用下结构位移和加速度响应的对比分析,显示框架结构对天津波反应比较敏感。通过对地震信号进行FFT变换,显示结构前5阶频率均处于天津波能量谱最大范围内,证实了结构对天津波敏感的原因。

关 键 词:板型结构  ANSYS  有限元分析  地震反应  FFT变换

THE SEISMIC RESPONSE ANALYSIS ON HIGH-RISE REINFORCED CONCRETE FRAME WITH PLATE-SHAPE
Yan Anzhi Sun Haili.THE SEISMIC RESPONSE ANALYSIS ON HIGH-RISE REINFORCED CONCRETE FRAME WITH PLATE-SHAPE[J].Industrial Construction,2011(Z1):254-257,282.
Authors:Yan Anzhi Sun Haili
Affiliation:Yan Anzhi Sun Haili(School of Civil Engineering,Henan Polytechnic University,Jiaozuo 454003,China)
Abstract:The Yima gasification furnace workshop,which is 56 m long,19.5 m wide and 56 m high,is made up of high-rise reinforced concrete frame.Structural dynamic performance is studied by considering the effect of the devices with in the workshop on the frame.The natural vibration characteristics are analyzed by using the large general structure analysis software ANSYS.The results show that the fourth and fifth modes are both buckling modes.It verifies the structure is of the plate-shape character.The frame is more ...
Keywords:plate-shape structure  ANSYS  finite element analysis  seismic response  FFT transform  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号